l do not scale from this print l htst-1xx-xx-xx-d-xx-xx no of positions -02 (straight only) -03 thru -18, -20, -24, -25, -28, -30, -32 & -36 -d: double row (use htst-xx-d) lead style see table 1 & table 2 plating specification -g: gold, 10 au / 50 ni min on contact, 3 au / 50 ni min on tail -t: matte tin, contact and tail -s: selective, 30 au / 50 ni min on contact, matte tin tail -l: light selective, 10 au / 50 ni min on contact, matte tin tail -h: heavy gold, 30 au / 50 ni min on contact, 3au / 50 ni min on tail -f: flash selective, 3 au / 50 ni on contact, matte tin tail -tm: matte tin contact and tail -sm: selective, 30 au / 50 ni on contact, matte tin tail -fm: flash selective, 3 au / 50 ni min on contact, matte tin tail -lm: light selective, 10 au / 50 ni min, matte tin tail option blank: straight (styles -04 & -05 n/a) -ra: right angle (styles -01, -02 & -03 n/a) -ll: locking lead (straight only) -la: -ra option with -ll option row specification -xx: indicates position omitted polarization option ((no of pos x .100) + .300) ref [2.54] [7.62] ((no of pos x .100) + .200) ref [2.54] [5.08] .250 6.35 ref .100 ref 2.54 .100 2.53 .365 9.27 ref fig. 1 htst-111-01-xx-d-ll shown 04 02 03 01 c l .160[4.06] ref (-03 pos) .200[5.08] ref (all other pos) .015 0.38 ref .350 8.89 ref .025 sq 0.64 ref (typ) "a" "a" pos #1 indicator htst-xx-d see note 6 "a" (see note 4) .250 6.35 ref * .04 1.0 (typ) .165 ref 4.19 gold plate (see note 3) 'b' section "a"-"a" see note 4 .010[0.25] .000[0.00] terminal (see table 1) c1 c2 * .0080 0.203 * .019 min 0.49 detail 'b' scale 6 : 1 c3 l c = crimp location -ll & -la crimp locations even pos odd pos .250 ref 6.35 .130 3.30 ref c * dimensions apply when using -ll option only sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: high temp top shroud terminal strip by: htst-1xx-xx-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/16/04 2 1 sheet scale: 1.5:1 insulator: lcp, ul 94 vo color: natural terminal: phos bronze f:\dwg\misc\mktg\htst-1xx-xx-xx-d-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. terminal pushout force: 3 lbs. 3. assemble gold plated end as shown. 4. terminals to be flush to .010[.25] below top of shroud. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l
2 max sway (typ) 04 02 03 01 c l -ra & -la options (htst-111-04-xx-d-la shown) (same as fig. 1, unless otherwise stated) fig. 2 see note 4 c4 * .04 (typ) 1.0 (see table 2) "b" * .0080 0.203 (typ) .035 .010 (typ) 0.89 0.25 .100 2.54 90 c6 c5 terminal #2 (see table 2) terminal #1 (see table 2) c7 (see table 2) "b" ref "d" (see note 4) .035 .010 0.89 0.25 (typ) 90 terminal #2 (see table 2) terminal #1 (see table 2) in-process 2 c8 .010[0.25] .000[0.00] (see table 2) "c" terminal #1 (see table 2) in-process 1 .010[0.25] .000[0.00] tube packaging view for 04 & 05 lead styles * dimensions apply when using -la option only sheet of high temp top shroud terminal strip by: htst-1xx-xx-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/16/04 2 2 sheet scale: 2:1 revision l f:\dwg\misc\mktg\htst-1xx-xx-xx-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
