View NL8060BC29-01_6835388.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tft color lcd module NL8060BC29-01 description NL8060BC29-01 is a tft (thin film transistor) active matrix color liquid crystal display (lcd) module comprising amorphous silicon tft attached to each signal electrode, a driving circuit, and a backlight. the 29 cm diagonal display area contains 800 600 pixels and can display 262144 color simultaneously. by utilizing one lamp/edge-light type backlight, a very thin profile and low power consumption have been achieved. features ? 6-bit digital rgb signals ? 3.3 v operation (5.0 v available) ? thin and light weight ? low reflection ? low power consumption ? incorporated edge light type backlight (one lamp, inverter-less) ? data enable function applications ? personal computer (pc), word processor ? display terminals for control system ? new media ? monitors for process controller 29 cm (11.3 type), 800 600 pixels, 262144 colors, incorporated one lamp/edge-light type backlight 1996 data sheet document no. en0194ej1v0ds00 date published june 1996 p printed in japan
NL8060BC29-01 2 structure and functions a tft color lcd module comprises a tft lcd panel, lsis for driving liquid crystal, and the backlight. the tft lcd panel is composed of a tft array glass substrate superimposed on a color filter glass substrate with liquid crystal filled in the narrow gap between two substrates. the backlight apparatus is located on the backside of the lcd panel. rgb (red, green, blue) data signals are sent to lcd panel drivers after modulation into suitable forms for active matrix addressing through signal processor. each of the liquid crystal cells acts as an electro-optical switch that controls the light transmission from the backlight by a signal applied to a signal electrode through the tft switch. block diagram digital signal processor lcd timing controller power supply circuit level shift h-driver backlight v-driver 2400 lines 600 lines tft lcd panel h : 800 3 (r, g, b) v : 600 lsls drivers r0?5 g0?5 b0?5 clk hsync vsync de v cc vh outline of characteristics (at room temperature) display area 211.2 (h) 158.4 (v) mm drive system a-si tft active matrix display colors 262144 colors number of pixels 800 600 pixels pixel arrangement rgb vertical stripe pixel pitch 0.288 (h) 0.288 (v) mm module size 264.0 (h) 193.0 (v) 7.5 typ. (d) mm weight 485 g (typ.) contrast ratio 150:1 (typ.) viewing angle (more than the contrast ratio of 10:1) horizontal : 45? (typ. left side, right side) vertical : 20? (typ. up side), 35? (typ. down side) designed viewing direction ? wider viewing angle with contrast ratio : down side (6 oclock) ? wider viewing angle without image reversal: up side (12 oclock) ? optimum grayscale ( g = 2.2) : perpendicular color gamut 42 % (typ. center, to ntsc) response time 40 ms (max.), white to black luminance 70 cd/m 2 (typ.) (lamp current: 3.3 marms) signal system 6-bit digital signals for each of rgb primary colors, synchronous signals (hsync, vsync), dot clock (clk) supply voltage 3.3 v [5.0 v] (logic, lcd driving) backlight edge light type, one cold cathode fluorescent lamp, inverter-less power consumption 3.1 w (typ. at 3.3 v, 70 cd/m 2 )
3 NL8060BC29-01 general specifications item specification unit module size 264.0 0.5 (h) 193.0 0.5 (v) 8.0 max. (d) mm display area 230.4 (h) 172.8 (v) mm number of pixels 800 (h) 600 (v) pixel dot pitch 0.096 (h) 0.288 (v) mm pixel pitch 0.288 (h) 0.288 (v) mm pixel arrangement rgb (red, green, blue) vertical stripe display colors 262144 color weight 505 (max.) g absolute maximum ratings parameter symbol rating unit remarks supply voltage v cc C0.3 to 6.5 v t a = 25 ?c input voltage v i C0.3 to 6.5 v v i C v cc < 3.0 storage temp. t st C20 to 60 ?c operating temp. t op 0 to 50 ?c module surface * humidity 95 % relative humidity t a = 40 ?c no condensation 85 % relative humidity t a = 50 ?c absolute humidity shall not t a > 50 ?c exceed t a = 50 ?c, 85 % relative humidity level * measured at the display area electrical characteristics (1) logic, lcd driving t a = 25 ?c parameter symbol min. typ. max. unit remarks supply voltage v cc 3.0 3.3 3.6 v v cc = 3.3 v (4.75) (5.0) (5.25) (v cc = 5.0 v) logic input l voltage v il 0Cv cc 0.3 v logic input h voltage v ih v cc 0.7 C 5.25 v supply current i cc C * 1 330 * 2 600 ma v cc = 3.3 v C * 1 (250) * 2 (550) (v cc = 5.0 v) *1. checker flag pattern (in eiaj ed-2522) *2. theoretical maximum current pattern
NL8060BC29-01 4 (2) backlight t a = 25 ?c parameter symbol min. typ. max. unit remarks lamp current i l 2.0 3.3 5.5 marms 70 cd/m 2 : 3.3 marms (typ.) lamp voltage v l C 500 C vrms 90 cd/m 2 : 4.5 marms (typ.) lamp turn on voltage v s 900 950 C vrms t a = 25 ?c 1360 1450 C vrms t a = 0 ?c oscillator frequency ft 50 54 58 khz note note recommended value of ft ? ft is within the specification. and ? ft = 1 (2n-1) th: hsync period 4th n : a natural number (1, 2, 3, ) if ft is out of the recommended value, interference between ft frequency and hsync frequency may cause beat on the display. supply voltage sequence *1 the supply voltage for input signals should be the same as v cc . *2 apply vh within the lcd operation period. when the backlight turns on before lcd operation or the lcd operation turns off before the backlight turns off, the display may momentarily become white. *3 when the power is off, please keep whole signals (hsync, vsync, clk, de, data) low level or high impedance. 3.0 (4.75 v) 3.0 (4.75 v) 0s 5 NL8060BC29-01 interface pin connection (1) interface signals, power supply module side connector mating connector cn1 df9-41p-1v (no. 1 to 41) df9x-41s-1v (x a, b, c) supplier: hirose electric co., ltd. (2) backlight lamp side connector mating connector cn4 bhr-03vs-1 sm02 (8.0) b-bhs-tb supplier: j.s.t trading company, ltd pin no. symbol function 1 vh high voltage terminal 2 n. c. non-connection 3 vl low voltage terminal lsb : large significant bit msb : most significant bit notes 1. v cc : all v cc terminals should be connected to +3.3 v [+5.0 v]. 2. mode: h = fixed mode l or open = de mode 3. gnd is connected to the frame of the lcd module. ? ? ? pin no. symbol function 1 gnd ground note 3 2 dclk dot clock 3 gnd ground note 3 4 hsync horizontal sync. 5 vsync vertical sync. 6 gnd ground note 3 7 gnd ground note 3 8 gnd ground note 3 9 r0 red data (lsb) 10 r1 red data 11 r2 red data 12 gnd ground note 3 13 r3 red data 14 r4 red data 15 r5 red data (msb) 16 gnd ground note 3 17 gnd ground note 3 18 gnd ground note 3 19 g0 green data (lsb) 20 g1 green data 21 g2 green data pin no. symbol function 22 gnd ground note 3 23 g3 green data 24 g4 green data 25 g5 green data (msb) 26 gnd ground note 3 27 gnd ground note 3 28 gnd ground note 3 29 b0 blue data (lsb) 30 b1 blue data 31 b2 blue data 32 gnd ground note 3 33 b3 blue data 34 b4 blue data 35 b5 blue data (msb) 36 gnd ground note 3 37 de data enable 38 v cc power supply note 1 39 v cc power supply note 1 40 v cc power supply note 1 41 mode timing mode select note 2 lower side upper side cn1 1 2 3 cn2 1 3 41 2 4 40
NL8060BC29-01 6 display colors vs. input data signals display colors data signal (0: low level, 1: high level) r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 black 000000 000000 000000 blue 000000 000000 111111 red 111111 000000 000000 basic colors magenta 111111 000000 111111 green 000000 111111 000000 cyan 000000 111111 111111 yellow 111111 111111 000000 white 111111 111111 111111 black 000000 000000 000000 000001 000000 000000 dark 000010 000000 000000 ||| red grayscale | | | ? ||| bright 111101 000000 000000 111110 000000 000000 red 111111 000000 000000 black 000000 000000 000000 000000 000001 000000 dark 000000 000010 000000 ||| green grayscale | | | ? ||| bright 000000 111101 000000 000000 111110 000000 green 000000 111111 000000 black 000000 000000 000000 000000 000000 000001 dark 000000 000000 000010 ||| blue grayscale | | | ? ||| bright 000000 000000 111101 000000 000000 111110 blue 000000 000000 111111 note colors are developed in combination with 6-bit signals (64 steps in grayscale) of each primary red, green, and blue color. this process can result in up to 262144 (64 64 64) colors.
7 NL8060BC29-01 data r0 - r5 g0 - g5 b0 - b5 input signal timing (1) input signal specifications parameter symbol min. typ. max. unit remarks clk frequency 1/t c 34.0 38.362 40.0 mhz 26.067 ns (typ.) duty tch/t c 0.4 0.5 0.6 C rise, fall tcrf C C 10 ns hsync period th C 26.693 C m s 37.463 khz (typ.) C 1024 C clk display period thd 800 clk front-porch thf 24 clk fixed timing mode 4 24 C clk de mode pulse width thp * 2 72 127 clk fixed timing mode 2 72 C clk de mode back-porch thb * 2 128 198 clk fixed timing mode 2 128 C clk de mode thp + thb * 200 clk fixed timing mode 15 200 C clk de mode clk-hsync timing thch 10 C C ns hsync-clk timing thcs 8 C C ns hsync-vsync timing tvhh 1 C C clk vsync-hsync timing tvhs 15 C C ns rise, fall thrf C C 10 ns vsync period tv 16.1 16.683 17.2 ms 59.94 hz (typ.) C 625 C h display period tvd 600 h front-porch tvf 1 h fixed timing mode 1 1 C h de mode pulse width tvp * 1 2 23 h fixed timing mode 1 2 C h de mode back-porch tvb * 1 22 23 h fixed timing mode 1 22 C h de mode tvp + tvb * 24 h fixed timing mode 2 24 254 h de mode rise, fall tvrf C C 10 ns clk-data timing tds 8 C C ns data-clk timing tdh 10 C C ns rise, fall tdrf C C 10 ns de de-clk timing tes 8 C C ns de mode clk-de timing teh 10 C C ns rise, fall terf C C 10 ns all of parameters should be kept in the specified range.
NL8060BC29-01 8 (2) definition of input signal timing tvp tv vsync display period (note) tvb tvf tvd de (at de mode) thp th hsync display period thb thf thd de (at de mode) (note) note these do not exist as signals.
9 NL8060BC29-01 t c tch clk hsync tvhs tvhh 0.5 v cc 0.7 v cc 0.5 v cc 0.3 v cc tvrf vsync clk thcs thch 0.5 v cc 0.7 v cc 0.5 v cc 0.3 v cc thrf hsync 0.7 v cc 0.5 v cc 0.3 v cc terf de (r0-r5) 0.7 v cc (g0-g5) 0.5 v cc data tdrf tdrf tdh tds invalid (b0-b5) 0.3 v cc terf tes teh tes teh invalid 0.7 v cc 0.5 v cc 0.3 v cc tcrf tcrf
NL8060BC29-01 10 (3) input signal timing chart a) fixed timing mode 12 201 200 (note: y = 0 to 599) 1000 1001 1024 1 clk hsync 2clk (min.) 200clk (fixed) 1clk 800clk (fixed) 24clk invalid invalid d (0, y) d (1, y) d (798, y) d (799, y) hsync invalid r0 - r5 g0 - g5 b0 - b5 25 26 624 625 1 625 623 624 25 3 2 1 24h (fixed) hsync vsync 1h (min.) 1h 600h (fixed) 1h 1 hsync d (x, 0) d (x, y) d (x, 598) d (x, 599) invalid (note: x = 0 to 799) invalid d (x, y) d (799, y) invalid 1h (min.) r0 - r5 g0 - g5 b0 - b5 r0 - r5 g0 - g5 b0 - b5 2clk (min.) d (0, y) d (1, y)
11 NL8060BC29-01 b) de mode 12 (note: y = 0 to 599) 1 clk hsync thb 1clk 800clk (fixed) thf invalid invalid d (0, y) d (1, y) d (798, y) d (799, y) invalid r0 - r5 g0 - g5 b0 - b5 3 2 1 tvb hsync vsync 1h 600h (fixed) 1 de d (x, 0) d (x, y) d (x, 599) invalid (note: x = 0 to 799) invalid d (0, y) d (1, y) d (x, y) d (799, y) invalid r0 - r5 g0 - g5 b0 - b5 r0 - r5 g0 - g5 b0 - b5 thp de de tvp tvf
NL8060BC29-01 12 (4) display position d (0, 0) d (1, 0) - - - - ----- d (x, 0) - - ------- d (798, 0) d (799, 0) d (0, 1) d (1, 1) - - - - ----- d (x, 1) - - ------- d (798, 1) d (799, 1) --------- --------- d (0, y) d (1, y) - - - - ----- d (x, y) - - ------- d (798, y) d (799, y) --------- --------- d (0, 598) d (1, 598) - - - - ----- d (x, 598) - - ------- d (798, 598) d (799, 598) d (0, 599) d (1, 599) - - - - ----- d (x, 599) - - ------- d (798, 599) d (799, 599) --- --- --- --- --- --- --- --- --- --- --- --- --- ---
13 NL8060BC29-01 general caution (1) caution when taking out the module 1) pick the pouch only, when taking out module from a shipping package. (2) cautions for handling the module 1) as the electrostatic discharges may break the lcd module, handle the lcd module with care. peel a protection sheet off from the lcd panel surface as slowly as possible. 2) as the lcd panel and back-light element are made from fragile glass material, impulse and pressure to the lcd module should be avoided. 3) as the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. 4) do not pull the interface connectors in or out while the lcd module is operating. 5) put the module display side down on a flat horizontal plane. 6) handle connectors and cables with care. 7) the torque to mounting screw should never exceed 0.294 nm (3 kgfcm). (3) cautions for the operation 1) when the module is operating, do not lose cilk, hsync or vsync signals. if any one of these signals is lost, the lcd panel would be damaged. 2) obey the supply voltage sequence. if wrong sequence is applied, the module would be damaged. (4) cautions for the atmosphere 1) dew drop atmosphere should be avoided. 2) do not store and/or operate the lcd module in a high temperature and/or humidity atmosphere. storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. (5) cautions for the module characteristics 1) do not apply fixed pattern data signal to the lcd module at product aging. applying fixed pattern for a long time may cause image sticking. (6) other cautions 1) do not disassemble and/or re-assemble lcd module. 2) do not re-adjust variable resistor or switch etc. 3) when returning the module for repair or etc., please pack the module not to be broken. we recommend to use the original shipping packages. liquid crystal display has the following specific characteristics. these are not defects or malfunctions. the display condition of lcd module may be affected by the ambient temperature. the lcd module uses cold cathode tubes for backlighting. optical characteristics, like luminance or uniformity, will change during time. uneven brightness and/or small spots may be noticed depending on different display patterns.
NL8060BC29-01 14 outline drawing front side (unit in mm) (150) (162) (90) 13 ?0.2 (11.4) (9.4) (8) (5.5) 3.1 ?.1 2.4 ?0.3 8.0 max 2.5 ?0.3 detail hole b 2.1 ?.1 (165.4) 167 ?0.3 (173.5) 193 ?0.5 145.0 ?0.2 50 ?5 (7.6) (4) see detail hole a active area (230.40*172.80) bezel opening (234.4*176.8) 2* 3.4 ?.1 (2.7) module center hole b 4*r4.0 (129.2) (242) (250) 254 ?0.3 264 ?0.5 active area center cn2 bhr ?03vs ?1 (jst) (140.0) 5.0 ?0.2 (2.5) (9.6) 2.1 ?.1 see detail hole a hole c f (259.5) 1.7 ?.1 2.1 ?.1 r1.7 ?.1 center of hole c detail hole a (10.0) f * the torque to mounting screw should never exceed 0.294 nm (3 kgfcm).
15 NL8060BC29-01 rear side (unit in mm) (6.5) (7.5) (5.1) (256.1) (246.2) (249.5) (249.5) (4) 4-r4 (247.1) interface connector center cn1 df9-41p-1v (hirose) (4) (4.1) (4.1) (10) (150) (171.9) (2.5) (1.8) 8.0 max shield (front) shield (tcp) sec a-a (scale 2 : 1) (46.6) (91.8) (162) (93.4) (71.4) (53.4) (5.5) (45) nl 8060bc29-01 a5710021 a100100100100 a100100100100 95. 07 .27/ made in japan caution high voltage a a : mounting area
NL8060BC29-01 16 no part of this document may be copied in any form or by any means without the prior written consent of nec corporation. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or of others.

▲Up To Search▲

Price & Availability of NL8060BC29-01

	To Download NL8060BC29-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .