fiber optic lan components connectorized pin plus preamplifier hfd3180-00 2 honeywell features ? prealigned lc sff connector sleeve ? data rates > 1ghz ? pin detector and preamplifier in a to-46 heremtic package ? 5v or 3.3v operation ? gaas pin detector and bicmos preamplifier ? differential output for low noise ? 1.1ghz typical bandwidth the HFD3180-002 is a high-performance 850nm gaas detector and pre- amplifier packaged for high-speed data communications. the product is designed for ease of use by the module designer or manufacturer in ieee 802.3z (1.25gbps ethernet), ansi 10625 (1.062 gbps fibre channel) and atm xxx, (622mbps) communications standards. the HFD3180-002 converts optical power into an electrical signal that is used in fiber optic communications and other applications. as the light increases, the output voltage increases, limiting at input powers above ?10dbm. the differential output is designed to be ac coupled into a data amplifier. the pre-aligned and lensed package with an industry standard lc sff style connector sleeve, allows for "drop in" assembly to reduce manufacturing cost. the honeywell HFD3180-002 is designed to interface with 50/125 and 62.5/125mm multimode fiber.
fiber optic lan components connectorized pin plus preamplifier HFD3180-002 2 honeywell ? for application help: call 1-800-537-6945 absolute maximum ratings parameter rating storage temperature -40 to +85 c case operating temperature 0 to +70 c lead solder temperature 260 c, 10 sec. power supply voltage -0.5 to 6 v incident optical power 0 dbm average, +4 dbm peak notice stresses greater than those listed under ?absolute maximum ratings? may cause permanent damage to the device. this is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. electro-optical characteristics (vcc=3.3v, 0 c fiber optic lan components connectorized pin plus preamplifier HFD3180-002 for application help: call 1-800-537-6945 honeywell ? 3 figure 1: internal schematic diagram of the HFD3180-002 figure 2: recommended interface circuit for the HFD3180-002 r=10 = ? c 1 = 10 nf c 2 = data rate dependant (22nf for rates > 1gbps figure 3: agc threshold power vs. output offset voltage HFD3180-002 responsvity vs. temperature 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 0 102030405060708090100 temperature (c) responsivity (mv/uw) 3.3v 5v automatic gain control vcc 50 ? 300pf 100pf 270 ? 50 ? case ground data data vcc 10 ? 10nf case ground data data hfd30xx hfd31xx hfd33xx vcc 50 ? t-lines limiting amplifier or test equipment 22nf 100 ? note: 100 ? terminating resistor is optional
fiber optic lan components connectorized pin plus preamplifier HFD3180-002 02/01/02 honeywell inc. 11 west spring street freeport, illinois 61032 honeywell inc. optoelectronics facility 830 east arapaho road richardson, texas 75081 honeywell control systems ltd. zodiac house calleva park aldermaston, berkshire rg7 8hw england helping you control your world 006697-1-en il50 glo 797 printed in usa printed with soy ink on 50% recycled paper order guide catalog listing description HFD3180-002 connectorized pin plus preamplifier mounting dimensions (for reference only) in./(mm) pinout number function 1v cc 2 inverted output 3 ground 4 non inverted output warranty/remedy honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. commencing with the date of shipment, honeywell?s warranty runs for 18 months. if warranted goods are returned to honeywell during that period of coverage, honeywell will repair or replace wit hout charge those items it finds defective. the foregoing is buyer?s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose . while we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. specifications may change at any time without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. sales and service micro switch sensing and control serves its customers through a worldwide network of sales offices and distributors. for application assistance, current specifications, pricing or name of the nearest authorized distributor, contact a nearby sales office or call: telephone 1-800-367-6786 (usa) 1-800-737-3360 (canada) +49 (0) 89 35813310 (germany) +65-580-3312 (singapore) +44 (0) 118 981 9511 (uk) fax 1-972-470-4326 (customer response center) 1-972-470-4549 (fax on demand) +49 (0) 89 3599971 (germany) +65 445 3033 (singapore) +44 (0) 118 981 7513 (uk) internet http://www. honeywell.com/vcsel vcsel@honeywell.com
fiber optic lan components connectorized pin plus preamplifier HFD3180-002 pk xxxx x dmm printed in usa future dimension (available starting late february 2002)
|
