View PS7200E-1A_6900571.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec compound semiconductor devices representative for availability and additional information. solid state relay ocmos fet PS7200E-1A 4-pin sop, 0.8 w w w w low on-state resistance 1-ch optical coupled mos fet document no. pn10293ej01v0ds (1st edition) (previous no. p15519ej1v0ds00) date published february 2003 cp(k) printed in japan ? ? ? ? nec compound semiconductor devices 2001, 2003 the mark ? ? ? ? shows major revised points. description the PS7200E-1A is a low on-state resistance solid state relay containing a gaas led on the light emitting side (input side) and mos fets on the output side. it is suitable for high-frequency signal control due to its low c r, low on-state resistance, and low off-state leakage current. features ? low ert (ert = 78 ps typ.) ? low c r (c r = 27 pf ? w ) ? low on-state resistance (r on = 0.8 w typ.) ? low off-state leakage current ? 1 channel type (1 a output) ? designed for ac/dc switching line changer ? small and thin package (4-pin sop, height = 2.1 mm) ? high isolation voltage (bv = 1 500 vr.m.s.) ? low offset voltage ? ordering number of tape product: PS7200E-1A-e3, e4, f3, f4 applications ? measurement equipment
data sheet pn10293ej01v0ds 2 PS7200E-1A package dimensions (unit : mm) 1. led anode 2. led cathode 3. mos fet 4. mos fet 43 12 top view 4.4 7.00.3 0.50.3 0.15 +0.10 C0.05 2.54 4.00.5 0.05 +0.08 C0.05 2.05 +0.08 C0.05 0.40 +0.10 C0.05 0.25 m marking example 200e 001 001 n week assembled year assembled (last 1 digit) nothing ink marking laser marking no.1 pin mark *1 applicable type numbers are underlined below rank code assembly lot type number *1 PS7200E-1A
data sheet pn10293ej01v0ds 3 PS7200E-1A ordering information part number package packing style application part number *1 PS7200E-1A 4-pin sop magazine case 100 pcs PS7200E-1A PS7200E-1A-e3 embossed tape 900 pcs/reel PS7200E-1A-e4 PS7200E-1A-f3 embossed tape 3 500 pcs/reel PS7200E-1A-f4 *1 for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw peak forward current *1 i fp 1a mos fet break down voltage v l 40 v continuous load current i l 250 ma power dissipation p d 100 mw isolation voltage *2 bv 1 500 vr.m.s. total power dissipation p t 150 mw operating ambient temperature t a - 40 to +85 c storage temperature t stg - 40 to +100 c *1 pw = 100 m s, duty cycle = 1 % *2 ac voltage for 1 minute at t a = 25 c, rh = 60 % between input and output recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 2520ma led off voltage v f 00.5v
data sheet pn10293ej01v0ds 4 PS7200E-1A electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.1 1.4 v reverse current i r v r = 5 v 5.0 m a mos fet off-state leakage current i loff v d = 40 v 0.1 10 na output capacitance c out v d = 0 v, f = 1 mhz 33.5 pf coupled led on-state current i fon i l = 250 ma 2.0 ma on-state resistance r on1 i f = 5 ma, i l = 10 ma 0.8 1.6 w r on2 i f = 5 ma, i l = 250 ma, t 10 ms 0.8 1.6 turn-on time *1 t on i f = 5 ma, v o = 5 v, r l = 500 w , 0.48 1.0 ms turn-off time *1 t off pw 3 10 ms 0.15 0.5 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 w isolation capacitance c i-o v = 0 v, f = 1 mhz 0.5 pf equivalent rise time *2 ert i f = 10 ma, tr (in) = 25 ps, v = 250 mv, 50 w termination 78 ps *1 the turn-on time and turn-off time are specified as input-pulse width 3 10 ms. be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. *2 ert waveform and equation tr (out) tr (in) 10 % 90 % 10 % 90 % input output v = 0 mv v = 250 mv ert = ? ? ? ? tr (out) 2 - tr (in) 2
data sheet pn10293ej01v0ds 5 PS7200E-1A typical characteristics (t a = 25 c, unless otherwise specified) ambient temperature t a (?c) maximum forward current i f (ma) maximum forward current vs. ambient temperature 1 ma 5 ma 20 ma 30 ma i f = 50 ma 10 ma C25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 ambient temperature t a (?c) forward voltage v f (v) ambient temperature forward voltage vs. 5 10 15 20 30 25 50 40 30 20 0 10 applied voltage v d (v) output capacitance c out (pf) output capacitance vs. applied voltage ambient temperature t a (?c) maximum load current i l (ma) maximum load current vs. ambient temperature 300 200 100 0 250 150 50 C25 0 25 50 75 100 85 ambient temperature t a (?c) off-state leakage current i loff (a) off-state leakage current vs. ambient temperature load current vs. load voltage load voltage v l (v) load current i l (ma) i f = 10 ma C1.0 C0.5 0.5 1.0 0 200 100 C100 C200 C25 0 25 50 75 85 100 100 80 60 40 0 20 10 C6 10 C11 10 C8 10 C7 10 C9 10 C10 f = 1 mhz 0 20 40 60 80 100 v d = 40 v
data sheet pn10293ej01v0ds 6 PS7200E-1A turn-off time vs. forward current forward current i f (ma) turn-off time t off (ms) turn-on time t on (ms) number (pcs) turn-on time distribution n = 50 pcs, i f = 5 ma, v o = 5 v, r l = 500 n = 50 pcs, i f = 5 ma, v o = 5 v, r l = 500 v o = 5 v, r l = 500 w turn-on time vs. forward current forward current i f (ma) turn-on time t on (ms) turn-off time t off (ms) number (pcs) turn-off time distribution normalized to 1.0 at t a = 25 ?c, i f = 5 ma, i l = 10 ma ambient temperature t a (?c) normalized on-state resistance r on normalized on-state resistance vs. ambient temperature n = 50 pcs, i f = 5 ma, i l = 10 ma on-state resistance distribution number (pcs) on-state resistance r on ( w ) C25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 5 15 20 25 10 30 2.5 2.0 1.5 1.0 0.5 0 0.8 1.0 1.2 0.9 1.1 30 20 15 10 0 5 25 v o = 5 v, r l = 500 w 5 15 20 30 25 10 0.5 0.4 0.3 0.2 0.1 0 0.10 0.15 0.05 0.20 0.25 30 20 15 10 0 5 25 0.3 0.5 0.4 0.6 0.7 30 20 15 10 0 5 25
data sheet pn10293ej01v0ds 7 PS7200E-1A normalized to 1.0 at t a = 25 ?c, i f = 5 ma, v o = 5 v, r l = 500 w normalized to 1.0 at t a = 25 ?c, i f = 5 ma, v o = 5 v, r l = 500 w ambient temperature t a (?c) normalized turn-on time t on normalized turn-on time vs. ambient temperature ambient temperature t a (?c) normalized turn-off time t off normalized turn-off time vs. ambient temperature C25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 C25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 remark the graphs indicate nominal characteristics.
data sheet pn10293ej01v0ds 8 PS7200E-1A taping specifications (unit : mm) PS7200E-1A-e3 PS7200E-1A-e4 tape direction outline and dimensions (tape) 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 2.40.1 1.5 +0.1 C0 7.40.1 5.50.05 12.00.2 outline and dimensions (reel) packing: 900 pcs/reel 2.00.5 r 1.0 13.00.2 f 21.00.8 f 2.0 0.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 180 +0 f ?1.5 +1 ?0 60 f
data sheet pn10293ej01v0ds 9 PS7200E-1A PS7200E-1A-f3 PS7200E-1A-f4 tape direction outline and dimensions (tape) 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 2.40.1 1.5 +0.1 C0 7.40.1 5.50.05 12.00.2 outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 f 21.00.8 f 3302.0 f 1001.0 f 2.0 0.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 13.00.2 f
data sheet pn10293ej01v0ds 10 PS7200E-1A recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 220?c package surface temperature t (?c) time (s) (heating) to 10 s to 60 s 260?c max. recommended temperature profile of infrared reflow 12030 s (preheating) 180?c 120?c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) cautions ?fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
data sheet pn10293ej01v0ds 11 PS7200E-1A m8e 00. 4 - 0110 the information in this document is current as of february, 2003. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation, nec compound semiconductor devices, ltd. and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above).
nec compound semiconductor devices hong kong limited hong kong head office taipei branch office korea branch office tel: +852-3107-7303 tel: +886-2-8712-0478 tel: +82-2-558-2120 fax: +852-3107-7309 fax: +886-2-2545-3859 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.ee.nec.de/ tel: +49-211-6503-01 fax: +49-211-6503-487 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 0302 nec compound semiconductor devices, ltd. 5th sales group, sales division tel: +81-44-435-1588 fax: +81-44-435-1579 e-mail: salesinfo@csd-nec.com for further information, please contact PS7200E-1A safety information on this product caution gaas products the product contains gallium arsenide, gaas. gaas vapor and powder are hazardous to human health if inhaled or ingested. ? do not destroy or burn the product. ? do not cut or cleave off any part of the product. ? do not crush or chemically dissolve the product. ? do not put the product in the mouth. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage.

▲Up To Search▲

Price & Availability of PS7200E-1A

	To Download PS7200E-1A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .