94svp www.vishay.com vishay os-con revision: 28-aug-12 1 document number: 90021 for technical questions, contact: aluminumcaps 4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 smd aluminum solid capacitors with conductive polymer features ? vishay os-con series utilizes a polymerized organic semiconductor as electrolyte ? features superior heat -proof characteristics compared with previous os-con series ? for power supply and other applications where high ripple current and low impedance are necessary ? rated ripple current values are guaranteed at 105 c ? no need to consider derating on maximum allowable ripple current ? smd version with base plate, containing no lead (pb) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 notes (1) if any doubt arises, measure the current after applying voltage (voltage treatment). voltage treatment: the rated voltage is ap plied to vishay os-con (2.5 wv to 20 wv) for 120 min at 105 c. (how ever, 20 v is applied to a 25 wv vishay os-con). (2) refer to soldering profile and land pattern document www.vishay.com/doc?90014 for soldering recommendation. quick reference data description value operating temperature range - 55 c to + 105 c capacitance tolerance at 120 hz m: 20 % tangent of loss angle (tan ? ) at 120 hz values in electrical da ta and ordering information table leakage current (a/2 min) (or less) (1) values in electrical data and ordering information table equivalent series resistance ( ? ), (100 khz to 300 khz) values in electric al data and ordering information table characteristics at high temp. and low temp. impedance ratio at 100 khz, + 20 c - 55 c z/z 20 c 0.75 to 1.25 + 105 c z/z 20 c 0.75 to 1.25 endurance + 105 c, 2000 h rated voltage a pplied (20 v for 25 v products) (1000 h for a5/b6 sizes) ? c/c within 20 % tan ?? 1.5 x the value of tangent of loss angle esr ? 1.5 x the value of esr leakage current ? the value of leakage current damp heat (steady state) (+ 60 c, 90 % to 95 % rh, 1000 h, no voltage) (500 h for a5/b6 sizes) ? c/c within 20 % tan ?? 1.5 x the value of tangent of loss angle esr ? 1.5 x the value of esr leakage current ? the value of leakage current after voltage treatment reverse voltage guarantee temporary: < 20 % of the rated voltage continuous: < 10 % of the rated voltage solder heat resistance (vps) (2) (230 c x 75 s) (please consult us for a5/b6 sizes) ? c/c within 10 % tan ?? 1.3 x the value of tangent of loss angle esr ? 1.3 x the value of esr leakage current ? the value of leakage current after voltage treatment dimensions in millimeters size code ? d 0.5 l max. w 0.2 h 0.2 c 0.2 r p 0.2 a5 4.0 5.5 4.3 4.3 5.0 0.5 to 0.8 1.0 b6 5.0 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4 c6 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.1 e7 8.0 7.0 8.3 8.3 9.0 0.5 to 0.8 3.2 f8 10.0 8.0 10.3 10.3 11.0 0.5 to 0.8 4.6 e12 8.0 12.0 8.3 8.3 9.0 0.8 to 1.1 3.2 f12 10.0 12.7 10.3 10.3 11.0 0.8 to 1.1 4.6 ? d pc r (+) w l h 0.2 max.
94svp www.vishay.com vishay os-con revision: 28-aug-12 2 document number: 90021 for technical questions, contact: aluminumcaps 4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) wv = rated voltage. (2) (sv) = surge voltage (at room temperature). the description conten ts are subject to change due to technical improvement without notice. please ask for latest specifications for order and use. recommended land pattern dimensions in millimeters size code a b c a5 1.0 6.2 1.6 b6 1.4 7.4 1.6 c6 2.1 9.1 1.6 e7 2.8 11.1 1.9 f8 4.3 13.1 1.9 e12 2.8 11.1 1.9 f12 4.3 13.1 1.9 case code list capacitance (f) wv (1) 2.5 4 6.310162025 (sv) (2) (3.3) (5.2) (8.2) (11.5) (18.4) (23) (25) 3.3 ----a5-- 4.7 ---a5--- 6.8 ---a5--c6 10.0 ---a5-b6e7 15.0 - -vb - a5 b6 - - 22.0 - - a5 - b6 c6 f8 27.0 -----c6- 33.0 - a5 - b6 - e7 e12 39.0 - b6 - - c6 - - 47.0 - - b6 c6 - e7 - 56.0 - - - c6 e7 f8 f12 68.0 -b6---f8- 82.0 - - c6 - e7 - - 100.0 - - c6 - f8 e12 - 120.0 ---e7--- 150.0 - c6 - e7, f8 f8 f12 - 180.0 ----e12-- 220.0 --e7, f8---- 270.0 ---f8--- 330.0 - e7 f8 e12 f12 - - 470.0 --f8, e12---- 560.0 - e12 - f12 - - - 680.0 e12f8----- 820.0 --f12---- 1200.0 -f12----- 1500.0 f12------ a b c
94svp www.vishay.com vishay os-con revision: 28-aug-12 3 document number: 90021 for technical questions, contact: aluminumcaps 4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) part numbers shown are for 20 % capacitance tolerance (x0). electrical data and ordering information u r (v) c r (f) case code max. esr (100 khz to 300 khz) (m ? ) allowable ripple current at 100 khz, + 105 c (ma) max. tangent of loss angle max. leakage current (a) (after 2 min) part number (1) 2.5 680 e12 16 4080 0.15 340 94svp687x02r5e12 1500 f12 13 5230 0.18 750 94svp158x02r5f12 4 33 a5 200 740 0.15 66.0 94svp336x0004a5 39 b6 70 1100 0.12 78 94svp396x0004b6 68 b6 70 1100 0.12 136 94svp686x0004b6 150 c6 50 1620 0.12 120 94svp157x0004c6 330 e7 35 2560 0.12 264 94svp337x0004e7 680 f8 25 3700 0.12 544 94svp687x0004f8 560 e12 16 4080 0.15 448 94svp567x0004e12 1200 f12 13 5230 0.18 960 94svp128x0004f12 6.3 22 a5 220 700 0.12 69.3 94svp226x06r3a5 47 b6 90 1060 0.12 148 94svp476x06r3b6 82 c6 50 1570 0.12 103 94svp826x06r3c6 100 c6 40 1810 0.12 126 94svp107x06r3c6 220 e7 35 2560 0.12 277 94svp227x06r3e7 220 f8 30 3020 0.12 277 94svp227x06r3f8 330 f8 25 3300 0.12 416 94svp337x06r3f8 470 e12 17 3960 0.15 592 94svp477x06r3e12 470 f8 25 3700 0.12 592 94svp477x06r3f8 820 f12 14 5040 0.15 775 94svp827x06r3f12 10 4.7 a5 260 660 0.08 23.5 94svp475x0010a5 6.8 a5 260 660 0.09 34.0 94svp685x0010a5 10 a5 240 670 0.10 50.0 94svp106x0010a5 15 a5 240 700 0.10 75.0 94svp156x0010a5 33 b6 130 990 0.15 165 94svp336x0010b6 47 c6 60 1450 0.12 94 94svp476x0010c6 56 c6 55 1510 0.12 112 94svp566x0010c6 120 e7 40 2120 0.12 240 94svp127x0010e7 150 e7 35 2560 0.12 300 94svp157x0010e7 150 f8 35 2670 0.12 300 94svp157x0010f8 270 f8 30 3020 0.12 540 94svp277x0010f8 330 e12 19 3740 0.15 660 94svp337x0010e12 560 f12 15 4870 0.15 840 94svp567x0010f12 16 3.3 a5 280 590 0.07 26.4 94svp335x0016a5 15 b6 150 920 0.10 120 94svp156x0016b6 22 b6 120 980 0.10 176 94svp226x0016b6 39 c6 65 1390 0.10 125 94svp396x0016c6 56 e7 50 1800 0.12 179 94svp566x0016e7 82 e7 45 1890 0.12 262 94svp826x0016e7 100 f8 40 2400 0.12 320 94svp107x0016f8 150 f8 35 2670 0.12 480 94SVP157X0016F8 180 e12 22 3480 0.15 576 94svp187x0016e12 330 f12 17 4580 0.15 792 94svp337x0016f12 20 10 b6 170 850 0.10 100 94svp106x0020b6 22 c6 65 1390 0.10 88 94svp226x0020c6 27 c6 60 1450 0.10 108 94svp276x0020c6 33 e7 50 1700 0.12 132 94svp336x0020e7 47 e7 50 1750 0.12 188 94svp476x0020e7 56 f8 45 2200 0.12 224 94svp566x0020f8 68 f8 45 2200 0.12 272 94svp686x0020f8 100 e12 25 3260 0.15 400 94svp107x0020e12 150 f12 21 4220 0.15 600 94svp157x0020f12 25 6.8 c6 80 1200 0.10 85 94svp685x0025c6 10 e7 60 1500 0.10 125 94svp106x0025e7 22 f8 50 2000 0.10 275 94svp226x0025f8 33 e12 30 2980 0.12 413 94svp336x0025e12 56 f12 28 3800 0.12 700 94svp566x0025f12
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
