published date : dec 25, 2007 drawing no : xdsb1607 v1 checked : shin ch i p.1/4 part number: xzfuy129a2 surface mount display part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. xzfuy129a2 yellow gaasp/gap 800 2940 590 common anode. rt. hand decimal absolute maximum ratings (ta=25c ) uy (gaasp/ gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 uy (gaasp/ gap) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 590 nm wavelength of dominant emission (typ.) (i f =10ma) d 588 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 20 pf operating characteristics (t a =25c ) features 0.51 inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package : 200pcs / reel. moisture sensitivity level : level 4. rohs compliant. preliminary spec notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3. the gap between the reflector and pcb shall not exceed 0.25mm. 4.specifications are subject to change without notice.
published date : dec 25, 2007 drawing no : xdsb1607 v1 checked : shin ch i p.2/4 part number: xzfuy129a2 surface mount display ? uy remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : dec 25, 2007 drawing no : xdsb1607 v1 checked : shin ch i p.3/4 part number: xzfuy129a2 surface mount display ? recommended soldering patte rn (units : mm;tolerance: 0.15) ? tape specification (units : mm)
published date : dec 25, 2007 drawing no : xdsb1607 v1 checked : shin ch i p.4/4 part number: xzfuy129a2 surface mount display packing & label specifications xzfuy129a2
|
