View TA79010S_6994935.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 1 toshiba bipolar linear integrated circuit silicon monolithic ta79005s, ta79006s, ta79007s, ta79008s, ta79009s, TA79010S, ta79012s, ta79015s, ta79018s, ta79020s, ta79024s output current of 1a, three-terminal negative voltage regulators ? 5 v, ? 6 v, ? 7 v, ? 8 v, ? 9 v, ? 10 v, ? 12 v, ? 15 v, ? 18 v, ? 20 v, ? 24 v features z suitable for cmos, ttl, and the power supply of other digital ics z internal thermal overload protection z internal short circuit current limiting z maximum output current of 1.0 a z metal fin (tab) fully covered with mold resin (to-220 nis package) pin assignment gnd 1 3 in out marking side 2 marking weight: 1.7 g (typ.) ta79 *** s lot no. (weekly code) a line indicates lead (pb)-free package or lead (pb)-free finish. part no. (or abbreviation code)
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 2 equivalent circuit absolute maximum ratings (ta = 25c) characteristics symbol rating unit ta79005s ta79006s ta79007s ta79008s ta79009s TA79010S ta79012s ta79015s ? 35 ta79018s ta79020s input voltage ta79024s v in ? 40 v (ta = 25c) 2 power dissipation (tc = 25c) p d 20 w operating temperature t opr ? 30~85 c storage temperature t stg ? 55~150 c junction temperature t j 150 c r th (j-c) 6.25 thermal resistance r th (j-a) 62.5 c/w note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, et c.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon review ing the toshiba semiconductor reliability handbook (?handling precautions?/derating concept and methods) and in dividual reliability data (i.e. reliability test report and estimated failure rate, etc).
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 3 ta79005s electrical characteristics (unless otherwise specified, v in = ? 10 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 5.2 ? 5.0 ? 4.8 v ? 12 v v in ? 8 v D 7 50 line regulation regline 1 t j = 25c ? 25 v v in ? 7 v D 35 100 mv 5 ma i out 1.5 a D 11 100 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 4 50 mv output voltage v out 1 t j = 25c ? 20 v v in ? 7 v, 5 ma i out 1.0 a ? 5.25 D ? 4.75 v quiescent current i b 1 t j = 25c D 4.3 8.0 ma line 1 ? 25 v v in ? 7 v D D 1.3 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 40 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 63 70 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 0.6 D mv/c ta79006s electrical characteristics (unless otherwise specified, v in = ? 11 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 6.25 ? 6.0 ? 5.75 v ? 13 v v in ? 9 v D 9 60 line regulation regline 1 t j = 25c ? 25 v v in ? 8 v D 43 120 mv 5 ma i out 1.5 a D 13 120 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 5 60 mv output voltage v out 1 t j = 25c ? 21 v v in ? 8 v, 5 ma i out 1.0 a ? 6.3 D ? 5.7 v quiescent current i b 1 t j = 25c D 4.3 8.0 ma line 1 ? 25 v v in ? 8 v D D 1.3 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 45 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 61 68 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 0.7 D mv/c
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 4 ta79007s electrical characteristics (unless otherwise specified, v in = ? 12 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 7.28 ? 7.0 ? 6.72 v ? 15 v v in ? 10 v D 10 70 line regulation regline 1 t j = 25c ? 25 v v in ? 9 v D 45 140 mv 5 ma i out 1.5 a D 20 140 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 7 70 mv output voltage v out 1 t j = 25c ? 22 v v in ? 9 v, 5 ma i out 1.0 a ? 7.35 D ? 6.65 v quiescent current i b 1 t j = 25c D 4.3 8.0 ma line 1 ? 25 v v in ? 9 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 49 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 60 67 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 0.9 D mv/c ta79008s electrical characteristics (unless otherwise specified, v in = ? 14 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 8.3 ? 8.0 ? 7.7 v ? 17 v v in ? 11 v D 11 80 line regulation regline 1 t j = 25c ? 25 v v in ? 10.5 v D 47 160 mv 5 ma i out 1.5 a D 26 160 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 9 80 mv output voltage v out 1 t j = 25c ? 23 v v in ? 10.5 v, 5 ma i out 1.0 a ? 8.4 D ? 7.6 v quiescent current i b 1 t j = 25c D 4.3 8.0 ma line 1 ? 25 v v in ? 10.5 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 52 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 59 66 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 1.0 D mv/c
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 5 ta79009s electrical characteristics (unless otherwise specified, v in = ? 15 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 9.3 ? 9.0 ? 8.7 v ? 19 v v in ? 13 v D 11 82 line regulation regline 1 t j = 25c ? 26 v v in ? 11.5 v D 48 162 mv 5 ma i out 1.5 a D 33 162 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 11 82 mv output voltage v out 1 t j = 25c ? 24 v v in ? 11.5 v, 5 ma i out 1.0 a ? 9.4 D ? 8.6 v quiescent current i b 1 t j = 25c D 4.3 8.0 ma line 1 ? 26.5 v v in ? 13 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 60 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 57 64 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 1.1 D mv/c TA79010S electrical characteristics (unless otherwise specified, v in = ? 16 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 10.4 ? 10.0 ? 9.6 v ? 20 v v in ? 14 v D 12 90 line regulation regline 1 t j = 25c ? 27 v v in ? 12.5 v D 50 180 mv 5 ma i out 1.5 a D 40 180 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 13 90 mv output voltage v out 1 t j = 25c ? 25 v v in ? 12.5 v, 5 ma i out 1.0 a ? 10.5 D ? 9.5 v quiescent current i b 1 t j = 25c D 4.4 8.0 ma line 1 ? 27.5 v v in ? 14 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 65 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 57 63 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 1.3 D mv/c
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 6 ta79012s electrical characteristics (unless otherwise specified, v in = ? 19 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 12.5 ? 12.0 ? 11.5 v ? 22 v v in ? 16 v D 13 120 line regulation regline 1 t j = 25c ? 30 v v in ? 14.5 v D 55 240 mv 5 ma i out 1.5 a D 46 240 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 17 120 mv output voltage v out 1 t j = 25c ? 27 v v in ? 14.5 v, 5 ma i out 1.0 a ? 12.6 D ? 11.4 v quiescent current i b 1 t j = 25c D 4.4 8.0 ma line 1 ? 30 v v in ? 14.5 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 75 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 54 61 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 1.6 D mv/c ta79015s electrical characteristics (unless otherwise specified, v in = ? 23 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 15.6 ? 15.0 ? 14.4 v ? 26 v v in ? 20 v D 14 150 line regulation regline 1 t j = 25c ? 30 v v in ? 17.5 v D 57 300 mv 5 ma i out 1.5 a D 68 300 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 25 150 mv output voltage v out 1 t j = 25c ? 30 v v in ? 17.5 v, 5 ma i out 1.0 a ? 15.75 D ? 14.25 v quiescent current i b 1 t j = 25c D 4.4 8.0 ma line 1 ? 30 v v in ? 17.5 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 90 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 53 60 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 2.0 D mv/c
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 7 ta79018s electrical characteristics (unless otherwise specified, v in = ? 27 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 18.7 ? 18.0 ? 17.3 v ? 30 v v in ? 24 v D 25 180 line regulation regline 1 t j = 25c ? 33 v v in ? 21 v D 80 360 mv 5 ma i out 1.5 a D 110 360 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 55 180 mv output voltage v out 1 t j = 25c ? 33 v v in ? 21 v, 5 ma i out 1.0 a ? 18.85 D ? 17.15 v quiescent current i b 1 t j = 25c D 4.5 8.0 ma line 1 ? 33 v v in ? 21 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 110 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 52 59 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 2.5 D mv/c ta79020s electrical characteristics (unless otherwise specified, v in = ? 30 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 20.8 ? 20.0 ? 19.2 v ? 32 v v in ? 26 v D 28 180 line regulation regline 1 t j = 25c ? 35 v v in ? 24 v D 104 360 mv 5 ma i out 1.5 a D 130 360 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 70 180 mv output voltage v out 1 t j = 25c ? 35 v v in ? 24 v, 5 ma i out 1.0 a ? 21.0 D ? 19.0 v quiescent current i b 1 t j = 25c D 4.6 8.0 ma line 1 ? 36.5 v v in ? 25 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 140 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 50 57 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 3.0 D mv/c
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 8 ta79024s electrical characteristics (unless otherwise specified, v in = ? 33 v, i out = 500 ma, 0c t j 125c, c in = 0.33 f, c out = 0.1 f) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 25.0 ? 24.0 ? 23.0 v ? 36 v v in ? 30 v D 31 240 line regulation regline 1 t j = 25c ? 38 v v in ? 27 v D 118 480 mv 5 ma i out 1.5 a D 150 480 load regulation regload 1 t j = 25c 250 ma i out 750 ma D 85 240 mv output voltage v out 1 t j = 25c ? 38 v v in ? 27 v, 5 ma i out 1.0 a ? 25.2 D ? 22.8 v quiescent current i b 1 t j = 25c D 4.6 8.0 ma line 1 ? 38 v v in ? 27 v D D 1.0 quiescent current change load ? i b 1 t j = 25c 5 ma i out 1.0 a D D 0.5 ma output noise voltage v no 2 ta = 25c, i out = 20 ma, 10 hz f 100 khz D 170 D v rms ripple rejection r.r. 3 f = 120 hz, i out = 20 ma, t j = 25c 49 56 D db short circuit current limit i sc 1 t j = 25c D 1.9 D a dropout voltage v d 1 t j = 25c, i out = 1.0 a D 2.0 D v average temperature coefficient of output voltage t cvo 1 i out = 5.0 ma D 3.5 D mv/c
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 9 test circuit 1 v out , regline, regload, i b , ? i b , v d , t cvo test circuit 2 v no test circuit 3 r.r.
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 10
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 11
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 12 package dimensions weight: 1.7 g (typ.)
ta79005,06,07,08,09,10,12,15,18,20,24s 2006-11-02 13 ? the information contained herein is subject to change without notice. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba or others. ? toshiba is continually working to improve the quality an d reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. ? the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliab ility or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. ? the products described in this document are subject to the foreign exchange and foreign trade laws. ? toshiba products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 030619eba restrictions on product use

▲Up To Search▲

Price & Availability of TA79010S

	To Download TA79010S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .