spec no: dsaa6057 rev no: v.6 date: mar/19/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:120 3001794 2.0x1.25mm smd chip led lamp package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. APT2012CGCK gr een description the green source color devices are made with ingaalp on gaas substrate light emitting diode . features 2.0mmx1.25mm smt led,0.75mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant.
spec no: dsaa6057 rev no: v.6 date: mar/19/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:120 3001794 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 APT2012CGCK green (ingaaip) water clear 10 40 120 symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaa6057 rev no: v.6 date: mar/19/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:120 3001794 green APT2012CGCK
spec no: dsaa6057 rev no: v.6 date: mar/19/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:120 3001794 recommended soldering pattern (units : mm ) APT2012CGCK remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. tape specifications (units : mm )
|
