document number: 83180 for technical questions, contact: led@vishay.com www.vishay.com rev. 1.5, 07-dec-09 1 clock display tdcg10..m, tdcr10..m, tdcy10..m vishay semiconductors description four digit display, with 10 mm digit charactersize. designed as clock display with active colon between digit two and three. features ? high efficient alingap technology ? dark surface, white segments ? common anode (tdc.1050m) ? common cathode (tdc.1060m) ? multiplex mode ? recommended viewing distance up to 7 m ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec applications ? clock modules for video/audioequipment, instrumentation, set top boxes product group and package data ? product group: display ? package: 10 mm clock ? product series: standard ? angle of half intensity: 50 note (1) t amb = 25 c, unless otherwise specified 16770 parts table part color luminous intensity at 10 ma circuitry tdcg1050m green i v = (2800 to 4000) cd common anode tdcg1060m green i v = (2800 to 4000) cd common cathode tdcr1050m red i v = (4000 to 6000) cd common anode tdcr1060m red i v = (4000 to 6000) cd common cathode tdcy1050m super yellow i v = (4000 to 8000) cd common anode TDCY1060M super yellow i v = (4000 to 8000) cd common cathode absolute maximum ratings (1) tdcg1050m, tdcg1060m, tdcr1050m, tdcr1060m, tdcy1050m, TDCY1060M parameter test condition symbol value unit reverse voltage per segment v r 5v dc forward current per segment i f 25 ma peak forward current per segment duty 1/10 at 1 khz i fm 160 ma power dissi pation p v 60 mw operating temperature range t amb - 40 to + 85 c storage temperature range t stg - 40 to + 100 c soldering temperature t sd 260 5 c
www.vishay.com for technical questions, contact: led@vishay.com document number: 83180 2 rev. 1.5, 07-dec-09 tdcg10..m, tdcr10..m, tdcy10..m vishay semiconductors clock display notes (1) t amb = 25 c, unless otherwise specified (2) i vmin. and i v groups are mean values of all segments (a to g, d1 to d4), matching factor within segments is 0.5, excluding decimal points and colon. notes (1) t amb = 25 c, unless otherwise specified (2) i vmin. and i v groups are mean values of all segments (a to g, d1 to d4), matching factor within segments is 0.5, excluding decimal points and colon. optical and electrical characteristics (1) tdcg1050m, tdcg1060m, green parameter test condition pa rt symbol min. typ. max. unit luminous intensity per segment (2) i f = 2 ma tdcg1050m i v - 1000 - cd tdcg1060m i f = 10 ma tdcg1050m i v 2800 4000 - cd tdcg1060m luminous intensity of colon i f = 2 ma tdcg1050m i v - 200 - cd tdcg1060m i f = 10 ma tdcg1050m i v 500 1200 - cd tdcg1060m dominant wavelength i f = 20 ma tdcg1050m, tdcg1060m d 562 573 575 nm peak wavelength i f = 20 ma p - 575 - nm spectral bandwidth i f = 20 ma ? -20-nm forward voltage per segment or dp i f = 20 ma v f -22.4v reverse current per segment or dp v r = 5 v i r - - 10 a optical and electrical characteristics (1) tdcr1050m, tdcr1060m, red parameter test condition pa rt symbol min. typ. max. unit luminous intensity per segment (2) i f = 2 ma tdcr1050m i v - 1500 - cd tdcr1060m i f = 10 ma tdcr1050m i v 4000 6000 - cd tdcr1060m luminous intensity of colon i f = 2 ma tdcr1050m i v - 400 - cd tdcr1060m i f = 10 ma tdcr1050m i v 500 800 - cd tdcr1060m dominant wavelength i f = 20 ma tdcr1050m, tdcr1060m d - 631 - nm peak wavelength i f = 20 ma p - 639 - nm spectral bandwidth i f = 20 ma -20-nm forward voltage per segment or dp i f = 20 ma v f -22.4v reverse current per segment or dp v r = 5 v i r - - 10 a
document number: 83180 for technical questions, contact: led@vishay.com www.vishay.com rev. 1.5, 07-dec-09 3 tdcg10..m, tdcr10..m, tdcy10..m clock display vishay semiconductors notes (1) t amb = 25 c, unless otherwise specified (2) i vmin. and i v groups are mean values of all segments (a to g, d1 to d4), matching factor within segments is 0.5, excluding decimal points and colon. pinning optical and electrical characteristics (1) tdcy1050 m , tdcy1060 m , super yellow parameter test condition part symbol min. typ. max. unit luminous intensity per segment (2) i f = 2 ma tdcy1050m i v -1500- cd TDCY1060M i f = 10 ma tdcy1050m i v 4000 8000 - cd TDCY1060M luminous intensity of colon i f = 2 ma tdcy1050m i v -400-cd TDCY1060M i f = 10 ma tdcy1050m i v 500 1000 - cd TDCY1060M dominant wavelength i f = 20 ma tdcy1050m, TDCY1060M d -589- nm peak wavelength i f = 20 ma p -591- nm spectral bandwidth i f = 20 ma ? -15-nm forward voltage per segment or dp i f = 20 ma v f -22.4v reverse current per segment or dp v r = 5 v i r - - 10 a 16715
www.vishay.com for technical questions, contact: led@vishay.com document number: 83180 4 rev. 1.5, 07-dec-09 tdcg10..m, tdcr10..m, tdcy10..m vishay semiconductors clock display package dimensions in millimeters 16764
vishay display-10 mm clock multiplex document number 83926 rev. 1.1, 25-mar-04 vishay semiconductors www.vishay.com 1 display-10 mm clock multiplex package dimensions in mm 16764
www.vishay.com 2 document number 83926 rev. 1.1, 25-mar-04 vishay display-10 mm clock multiplex vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany telephone: 49 (0)7131 67 2831, fax number: 49 (0)7131 67 2423
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
