industrial ethernet connectors xs5 @ -t / xs6 @ -t 1 industrial ethernet connectors xs5 @ -t / xs6 @ -t support for ethernet/ip, ethercat, and other popular networks based on ethernet ? combines tough rj45 connectors for use outside of panels and environment-resistance connectors with ip67 protection (m12). ? m12 smartclick mates with any threaded m12 socket and provides 'twist and click' c onnection with xs5p-t panel socket. ? m12 smartclick connectors are shielded to protect against emi. ? separate rj45 assembly connectors are available for easy wiring on site. ? uses awg22 cat5e cables that are suitable for wiring outside of panels. tm specifications materials and finish connector cable note: is a registered trademark of the omron corporation. type cable with connector on one end (m12) cable with connectors on both ends (m12/m12) cable with connectors on both ends (m12/rj45) cable with connectors on both ends (rj45/rj45) rj45 assembly connector m12 connector for panel mounting item / model xs5h-t421- @ m0-k xs5w-t421- @ m2-k xs5w-t421- @ mc-k xs5w-t421- @ md-k xs6g-t421-1 xs5p-t42 @ -5 rated current 3 a 2.5 a 3 a rated voltage 30 v contact resistance 20 m max. insulation resistance 500 m min. withstand voltage 1,000 vac for 60 s (leak current: 1 ma max.) ambient operating temperature ? 25 to 70 c ? 40 to 70 c ? 25 to 70 c ambient storage temperature ? 25 to 70 c ? 40 to 70 c ? 25 to 70 c degree of protection m12: iec ip67, rj45: iec ip20 item model m12 rj45 contact block pbt plastic (ul94v-0), light gray pa plastic (ul94v-0), black contacts materials phosphor bronze finish nickel base, 0.4- m gold-plating nickel base, 1.4- m gold-plating fixtures nickel-plated zinc alloy ? cover pbt ? o-ring rubber ? specifications ul cm pvc (double shielding) cat. 5e cores and colors awg22 (0.26/7): yellow, orange, white, and blue outer diameter 6.5 mm sheath color light blue tm
2 industrial ethernet connectors xs5 @ -t / xs6 @ -t 4-pin connectors with cable attached xs5h - plug on one cable end dimensions (unit: mm) ordering information note: ask your omron representative about other specifications. model number legend use this model number legend to ident ify products from their model number. when ordering, use a model number from the table in ordering information. 1. type h: connector connected to cable, m12 plug on one cable end 2. signal type t: ethernet 3. connector poles 4: 4 poles 4. contact plating 2: 0.4- m gold plating - m12 connectors 5. cable connection direction 1: straight 6. cable length a: 0.3 m g: 5 m b: 0.5 m j: 10 m c: 1 m k: 15 m d: 2 m e: 3 m 7. connections m: a yellow, b white, c orange, d blue (numbers inside circles are terminal numbers) 8. connectors on one end/both ends 0: one m12 plug 9. cable specifications k: ul cm pvc (double shielded) / cat.5e type cable length l (m) model straight cable with connector on one end (m12) 0.5 xs5h-t421-bm0-k 1 xs5h-t421-cm0-k 2 xs5h-t421-dm0-k 3 xs5h-t421-em0-k 5 xs5h-t421-gm0-k 10 xs5h-t421-jm0-k 15 xs5h-t421-km0-k xs5h-t421- @ m0-k (1 x m12) tm 1 4 3 2 44.7 l (ca b le length) d - coding m12 14.9 dia. xs5h - t42 1 - @ m @ -k 1234567 8 9
industrial ethernet connectors xs5 @ -t / xs6 @ -t 3 xs5w - plugs on both cable ends dimensions (unit: mm) ordering information dimensions (unit: mm) ordering information note: ask your omron representative about other specifications. type cable length l (m) model straight cable with connector on both ends (m12 / m12) 0.5 xs5w-t421-bm2-k 1 xs5w-t421-cm2-k 2 xs5w-t421-dm2-k 3 xs5w-t421-em2-k 5 xs5w-t421-gm2-k 10 xs5w-t421-jm2-k 15 xs5w-t421-km2-k type cable length l (m) model straight cable with connector on both ends (m12 / rj45) 0.3 xs5w-t421-amc-k 0.5 XS5W-T421-BMC-K 1 xs5w-t421-cmc-k 2 xs5w-t421-dmc-k 3 xs5w-t421-emc-k 5 xs5w-t421-gmc-k 10 xs5w-t421-jmc-k 15 xs5w-t421-kmc-k xs5w-t421- @ m2-k (2 x m12) tm 1 4 3 2 44.7 44.7 l (ca b le length) m12 m12 14.9 dia. 14.9 dia. d - coding xs5w-t421- @ mc-k (1x m12 and 1x rj45) tm 1 4 3 2 44.7 54.7 l (ca b le length) rj45 m12 14.9 dia. d - coding
4 industrial ethernet connectors xs5 @ -t / xs6 @ -t dimensions (unit: mm) ordering information note: ask your omron representative about other specifications. model number legend use this model number legend to ident ify products from their model number. when ordering, use a model number from the table in ordering information. 1. type w: connector connected to cable, plugs on both cable ends 2. signal type t: ethernet 3. connector poles 4: 4 poles 4. contact plating 2: 0.4- m gold plating - m12 connectors 1.4 m gold plating - rj45 connectors 5. cable connection direction 1: straight 6. cable length a: 0.3 m g: 5 m b: 0.5 m j: 10 m c: 1 m k: 15 m d: 2 m e: 3 m 7. connections m: a yellow, b white, c orange, d blue (numbers inside circles are terminal numbers) 8. connectors on one end/both ends 2: two m12 plugs c: one m12 plug + one rj45 plug d: two rj45 plugs 9. cable specifications k: ul cm pvc (double shielded) / cat.5e type cable length l (m) model straight cable with connector on both ends (rj45 / rj45) 0.3 xs5w-t421-amd-k 0.5 xs5w-t421-bmd-k 1 xs5w-t421-cmd-k 2 xs5w-t421-dmd-k 3 xs5w-t421-emd-k 5 xs5w-t421-gmd-k 10 xs5w-t421-jmd-k 15 xs5w-t421-kmd-k xs5w-t421- @ md-k (2 x rj45) 54.7 54.7 l (cable length) rj45 rj45 xs5w - t42 1 - @ m @ -k 1234567 8 9
industrial ethernet connectors xs5 @ -t / xs6 @ -t 5 assembly connector - rj45 xs6g - plugs dimensions (unit: mm) ordering information 4-pin panel-mount connectors xs5p - sockets dimensions (unit: mm) ordering information type cable length l (m) model straight rj45 assembly connector - - - xs6g-t421-1 type cable length l (m) model straight m12 connector for panel mounting rear locking 0.5 m xs5p-t426-5 front locking 0.5 m xs5p-t427-5 xs6g-t421-1 52.6 11.8 11.3 8.1 contact 3 contact 2 contact 6 contact 1 applicable wires 6.1 to 6.9 dia. stranded wires: awg22 to awg24 solid wires: awg22 to awg23 xs5p-t42 @ -5 (rear or front locking m12 socket) 20 18 13.9 dia. 22.1 10.5 2.5 2.8 pg9 500 10 3 (20) 17 18 yello w bl u e w hite orange m12 d - coding 15.3 panel thickness (t) = 1 to 4 dia. +0.1 0 xs5p-t427-5 (f ront locking) 17 18 14.6 dia. 2.8 pg9 500 22.1 11.9 10 3 (20) 20 18 w hite yello w bl u e orange 2.5 m12 d - coding wiring terminal no. color 1yellow 2 white 3 orange 4blue xs5p-t426-5 (rear locking) panel cutout dimension note 1: the panel cutout dimen- sion is the same for front-locking and rear- locking connectors. note 2: rotational positioning is not possible for connec- tor rotation.
6 industrial ethernet connectors xs5 @ -t / xs6 @ -t precautions correct use do not use the connectors in an atmosphere or environment that exceeds the specifications. connector connection and disconnection ? when connecting or disconnecting connectors, be sure to hold the connectors by han d. ? do not hold the cable when disconnecting connectors. ? when mating connectors, be sure to insert the plug all the way to the back of the socket before attempting to lock the connectors. ? do not use tools of any sort to mate the connectors. always use your hands. pliers or other tools may damage the connectors. wiring ? lay the cables so that external force is not applied to the connectors. otherwise, the degree of protection (ip67) may not be achieved. degree of protection ? the degree of protection of connect ors (ip67) is not for a fully watertight structure. do not the connectors underwater. ? do not step on or place any objects on the connectors. doing so may damage the connectors . general precautions ? do not pull excessively on the connectors or cables. do not instal l the connectors or cables in any way that would place a load directly on the mating section or cable connections. doing so can damage the connectors or break the wires inside the cables. ? install the connectors and cables where they will not be stepped on to prevent the wires inside the cables from being broken and to prevent the connectors from being damaged. if the connectors or cables must be installed where they might be stepped on, protect them with covers. ? refer to the specifications for your cables before bending the cables and do not bend them past their minimum bending radius.
industrial ethernet connectors xs5 @ -t / xs6 @ -t 7 memo
8 industrial ethernet connectors xs5 @ -t / xs6 @ -t omron on-line global - http://www.omron.com usa - http://www.components.omron.com cat. no. g019-e-01 printed in usa omron electronic components llc 55 e. commerce drive, suite b schaumburg, il 60173 847-882-2288 11/10 specificat ions subject to change without notice all sales are subject to omron electronic components llc standard terms and conditions of sale, which can be found at http://www.components.omron.com/compon ents/web/webfiles.ns f/sales_terms.html all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.0393 7. to convert grams into ounces, multiply by 0.03527.
|
