j do not scale from this print htst-1xx-xx-xx-d-xx-xx no of positions -02 (straight only) -03 thru -18, -20, -24, -25, -28, -30, -32 & -36 -d: double row (use htst-xx-d) lead style see table 1 & table 2 plating specification -g: gold - .000010 au (contact area) over .000050 ni -t: tin - .000200 sn over .000050 ni -s: selective - .000030 au (contact area) over .000050 ni -l: light selective - .000010 au (contact area), .000200 sn on tail, over .000050 ni -h: heavy gold - .000030 au (contact area) over .000050 ni -f: flash selective - .000003 au (contact area), .000200 sn on tail, over .000050 ni -p: gold flashed palladium nickel - .000003 au over .000030 pdni (contact area), .000150 sn on tail, over .000050 ni -tm: matte tin - .00010 to .00030 matte tin over .000050 to .00012 ni -sm: selective heavy gold, matte tin tail - (see -s,& -tm) -fm: flash selective gold, matte tin tail - (see -f,& -tm) -lm: selective light gold, matte tin tail - (see -l,& -tm) option blank: straight (styles -04 & -05 n/a) -ra: right angle (styles -01, -02 & -03 n/a) -ll: locking lead (straight only) -la: -ra option with -ll option row specification -xx: indicates position omitted polarization option ((no of pos x .100) + .300) ref [2.54] [7.62] ((no of pos x .100) + .200) ref [2.54] [5.08] .250 6.35 ref .100 ref 2.54 .100 2.53 .365 9.27 ref fig. 1 htst-111-01-xx-d-ll shown 04 02 03 01 c l .160[4.06] ref (-03 pos) .200[5.08] ref (all other pos) .015 0.38 ref .350 8.89 ref .025 sq 0.64 ref (typ) "a" "a" pos #1 indicator htst-xx-d see note 6 "a" (see note 4) .250 6.35 ref * .04 1.0 (typ) .165 ref 4.19 gold plate (see note 3) 'b' section "a"-"a" see note 4 .010[0.25] .000[0.00] terminal (see table 1) c1 c2 * .0080 0.203 * .019 min 0.49 detail 'b' scale 6 : 1 c3 l c = crimp location -ll & -la crimp locations even pos odd pos .250 ref 6.35 .130 3.30 ref c * dimensions apply when using -ll option only sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: high temp top shroud terminal strip by: htst-1xx-xx-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/16/04 2 1 sheet scale: 1.5:1 insulator: zenite 5145, color: natural alternate material: vectra v143lc color: natural terminal: phos bronze f:\dwg\misc\mktg\htst-1xx-xx-xx-d-xx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. terminal pushout force: 3 lbs. 3. assemble gold plated end as shown. 4. terminals to be flush to .010[.25] below top of shroud. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision j
2 max sway (typ) 04 02 03 01 c l -ra & -la options (htst-111-04-xx-d-la shown) (same as fig. 1, unless otherwise stated) fig. 2 see note 4 c4 * .04 (typ) 1.0 (see table 2) "b" * .0080 0.203 (typ) .035 .010 (typ) 0.89 0.25 .100 2.54 90 c6 c5 terminal #2 (see table 2) terminal #1 (see table 2) c7 (see table 2) "b" ref "d" (see note 4) .035 .010 0.89 0.25 (typ) 90 terminal #2 (see table 2) terminal #1 (see table 2) in-process 2 c8 .010[0.25] .000[0.00] (see table 2) "c" terminal #1 (see table 2) in-process 1 .010[0.25] .000[0.00] tube packaging view for 04 & 05 lead styles * dimensions apply when using -la option only sheet of high temp top shroud terminal strip by: htst-1xx-xx-xx-d-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 01/16/04 2 2 sheet scale: 2:1 revision j f:\dwg\misc\mktg\htst-1xx-xx-xx-d-xx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
