designed & dimensioned in millimeters do not scale from this print mods-f-8p8c-x-xx-x-x-th-x type -f e & i option plating -l: .000015" gold -s: .000030" gold -u: .000050" gold (see note 4) shielded -s: no panel grounds -s4: panel grounds on top and side (see table 2, sheet 3 for shield used) (leave blank for unshielded) through hole -r: rohs compliant positions/contacts -8p8c: 8 pos/8 con led 2 led 1 -x: code (see table 1, sheet 2) (not available with -n) -n: no led (see figure 1) -x: code (see table 1, sheet 2) (not available with -n) -n: no led (see figure 1) c1 15.80 .622 12.85 .506 3.48 .137 2 max sway (typ) fig. 1 mods-f-8p8c-x-n-n-th-r 1.78 .070 2.54 .100 1.02 .040 c2 c3 15.00 .591 13.10 .516 0.25 .010 2.62 .103 5.08 .200 2 max toe (typ) c4 c sheet of unless otherwise specified, dimensions are in mm. tolerances are: decimals angles .xx: .25 [.010] 2 .xxx: .13 [.005] .xxxx: .05 [.002] material: rj45 side entry pcb jack with led by: mods-f-8p8c-x-xx-x-x-th-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 5/9/2007 4 1 sheet scale: 2:1 insulator: nylon 46 spring wire: .35mm phos bronze shield: .25 copper alloy, nickel plated c:\enterprisevault\dwg\misc\mktg\mods-f-8p8c-x-xx-x-x-th-x-mkt.slddrw max flash allowed: .051 [.0020] max gate vestige: .051 [.0020] notes: 1. represents a critical dimension. 2. critical dimensions on pcb layout apply to the assembly. 3. led forward volatge is 2.3v (typ), reverse volatage is 5v. forward dc is 20ma. 4. plating applies to mating area, gold flash on tails, all plating over nickel underplate. 5. pin numbers reflect pin callout on the connector, not user system wiring assignment. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision m
15.80 .622 12.85 .506 3.48 .137 2 max sway (typ) fig. 2 mods-f-8p8c-x-x-x-th-r 2.54 .100 1.78 .070 9.14 .360 1.02 .040 2.29 .090 c5 c6 c9 0.640.03 .025.001 15.00 .591 13.10 .516 0.25 .010 2.62 .103 5.08 .200 2 max toe (typ) c7 c8 sheet of rj45 side entry pcb jack with led by: mods-f-8p8c-x-xx-x-x-th-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 5/9/2007 4 2 sheet scale: 2:1 revision m c:\enterprisevault\dwg\misc\mktg\mods-f-8p8c-x-xx-x-x-th-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
16.50 .650 3.48 .137 2 max sway (typ) fig. 6 mods-f-8p8c-x-s4-x-x-th-r mods-f-th-04 mods-f-th-03 mods-f-th-01 1.78 .070 1.02 .040 2 max sway (typ) c11 c12 c13 0.350.30 .014.012 15.75 .620 13.50 .531 0.25 .010 2.62 .103 5.37 .211 2 max toe (typ) c10 fig. 3 mods-f-8p8c-x-s-n-n-th-r (all dims same as fig 6) fig. 4 mods-f-8p8c-x-s-x-x-th-r (all dims same as fig 6) fig. 5 mods-f-8p8c-x-s4-n-n-th-r (all dims same as fig 6) mods-f-th-02 sheet of rj45 side entry pcb jack with led by: mods-f-8p8c-x-xx-x-x-th-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 5/9/2007 4 3 sheet scale: 2:1 revision m c:\enterprisevault\dwg\misc\mktg\mods-f-8p8c-x-xx-x-x-th-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
0.90 .035 1.60 .063 3.23 .127 0.90 .035 12.70 .500 16.50 .650 9.14 .360 3.43 .135 2.54 .100 1.78 .070 7.14 .281 2.29 .090 1.02 .040 0.51 .020 13.72 .540 fig. 7 pcb layout for mods-f-8p8c-x-xx-x-x-th-r 1 2 8 + - + - 0.90 .035 3.23 .127 0.90 .035 12.70 .500 9.14 .360 2.54 .100 1.78 .070 7.14 .281 2.29 .090 1.02 .040 0.51 .020 13.72 .540 fig. 9 pcb layout for mods-f-8p8c-x-x-x-th-r 1 2 8 + - + - 0.90 .035 1.60 .063 3.23 .127 12.70 .500 16.50 .650 3.43 .135 2.54 .100 1.78 .070 7.14 .281 1.02 .040 fig. 8 pcb layout for mods-f-8p8c-x-xx-n-n-th-r 1 2 8 0.90 .035 3.23 .127 12.70 .500 2.54 .100 1.78 .070 7.14 .281 1.02 .040 fig. 10 pcb layout for mods-f-8p8c-x-n-n-th-r 1 2 8 sheet of rj45 side entry pcb jack with led by: mods-f-8p8c-x-xx-x-x-th-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 5/9/2007 4 4 sheet scale: 2:1 revision m c:\enterprisevault\dwg\misc\mktg\mods-f-8p8c-x-xx-x-x-th-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
