1 622mbps bidi pin-tia 1490nm reciever(3.3v) t-149-622a-g3-b-01 luminentoic.com 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds1195-aug1805 rev. a.0 parameter symbol min typical max unit power supply v cc 3.0 3.3 3.6 v differential output offset voltage v d - +/-5 - v supply current (vcc=3.3v ) i cc - 21 30 ma dc electrical characteristics( tc=25oc ) features ? ingaas/inp pin photodiode with transimpedance ampli?er ? high sensitivity with agc ? differential ended output ? 3.3 supply voltage ? -40 to 85oc operating temperature ? integrated 4-pin to-46 with ball lens cap package ? 622 m pbs sonet/sdh/atm receiver s ? bi-directional optical module/transc eiver ? rohs compliance available parameter symbol min max unit supply voltage v cc - 6.5 v operating temperature t opr -40 +85 oc storage temperature t stg -40 +85 oc absolute maximum rating (tc=25oc) operating at v cc =3.3v, t c = 25oc, 9/125m sm ?ber parameter symbol min typical max unit test condition detection range - 14 75 1490 150 5 nm - wavelength isolation @ 1310nm+/- 50nm&1550nm+/-10nm - 26 - - db - gain @ 10 mbps differential g 6 7 - v/mw measure differentially ac coupled, rl=50 bandwidth (to -3db point) bw 404 470 - mhz - saturation power p sat -3 0 - dbm ber <10 -10 @ 622mbps, prbs 2 23 -1 er = 10 db sensitivity sens - -33 -31 dbm ber <10 -10 @ 622mbps, prbs 2 23 -1 er = 10 db output resistance r out 48 50 52 - ac/optical and electrical characteristics( tc=25oc )
2 622mbps bidi pin-tia 1490nm reciever(3.3v) t-149-622a-g3-b-01 luminentoic.com 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds1195-aug1805 rev. a.0 package diagram 4- 0.44 vcc bottom view dout dout all dimensions in mm to-46 package with half ball lens cap 5.2 + 0.1 ? + 1 14 case gnd 2.54 ? 6.32 ? + 0.1 0.04 + 0.03 ? + 0.1 ? ? + 0.075 + 0.005 ? ? + 0.3 2.5 4.7 5.36 11.12 basic plane focal plane dout dout functional schematic gnd vcc(+3.3v) pd 3 4 1 2
handling precautions: this device is susceptible to damage as a result of electrostatic discharge (esd). a static free environment is highly recommended. follow guidelines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerous to human eyes. avoid eye exposure to direct or indirect radiation. 3 t-149-622a-g3-b-01 important notice! all information contained in this document is subject to change without notice, at luminentoic s sole and absolute discretion. luminentoic warrants performance of its products to current speci?cations only in accordance with the companys standard one-year warranty; however, speci?cations designated as preliminary are given to describe components only, and luminentoic expressly disclaims any and all warranties for said products, including express, implied, and statutory warran - ties, warranties of merchantability, ?tness for a particular purpose, and non-infringement of proprietary rights. please refer to the companys terms and conditions of sale for further warranty information. luminentoic assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. no license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and luminentoic makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this docu - ment are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. luminentoic customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify luminentoic for any damages resulting from such use or sale. the information contained in this document is provided on an as is basis. customer agrees that luminentoic is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. customer must contact luminentoic to obtain the latest version of this publication to verify , before placing any order, that the information contained herein is current. ? luminentoic, inc. 2003 all rights reserved luminentoic.com 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds1195-aug1805 rev. a.0 622mbps bidi pin-tia 1490nm reciever(3.3v) warnings legal notice ordering information available options: t -1 49 - 622a -g3-b-01 T-149-622A-G3-B-01-G5 t-149-622a-g3-b-01-gr t - 149 - 622 a - g 3 - b - 01 - xx family detection range data rate pinout header type supply voltage cap type customer specifics rohs compliance t=pin tia 149=1475nm-1505nm 622=622mbps a=a-type g=to-46 3=3.3v b=ball lens special spec. blank = rohs non-compliant product g5 = rohs 5/6-compliant product (lead exemption) gr = full rohs compliant product (no exemption)
|
