155 coil components (smd) mc-s series item requirements characteristic impedance (ohms) 50,75 frequency range 0.03 to 0.37(ghz) operating temperature range (?) -10 to +65 connection type smt specifications circular connectors rectangular connectors coaxial connectors memory card modular connectors card edge connectors board-to-board connectors board-to-wire connectors fpc/ffc connectors optical connectors and devices microwave components excellent high frequency characteristics. insertion loss: 0.6 db (typical), phase balance: 3deg (typical). the exterior cladding of the cover made of pps resin, the board material made of glass epoxy substrate, and the solder plated electrodes contribute to excellent mechanical strength, heat resistance, and soldering qualities. embossed tape packaging permits automatic mounting. features cellular phone base stations, radio equipment applications coil components (relay headers) mc-r series item requirements characteristic impedance (ohms) 50,75 frequency range 0.03 to 0.2(ghz) operating temperature range (?) -10 to +65 connection type through hole specifications the use of coils made with a special winding method based on a lumped- constant design provide a high degree of matching, low loss, and high isolation. the metal case is designed with a hermetically sealed construction which contains inert gas. this permits quality to be maintained over a long period. the pre-soldering leads give easy soldering operations. use of the supplied teflon sheet permits the prevention of solder flux creepage. features radio equipment applications
|
