emc technology cage code # 24602 dwg # 1009825000 8851 sw old kansas ave. change notice en 09-e0458 rev lvl d stuart, fl 34997 sheet 1 of 2 title: specification control drawing part identifier: shift (neg) db value shift (pos) db value -.003 1, 2, 3, 4, 5, 6, 7, 8, 10 .003 1, 3, 6 -.004 3, 4, 5, 6, 7 .005 1, 3, 6 -.005 1,2, 3, 4, 5, 6, 7 .006 1 -.006 2, 3, 4, 5, 6 .007 1, 2, 3, 6 -.007 1, 2, 3, 4, 5, 6 description: temperature variable chip attenuator with high reliability testing. note: single lot and date code available upon request. assembly dwg: n/a 1.0 specifications: 1.1 electrical: 1.1.1 impedance: 50 ohms nominal. 1.1.2 operating frequency range: dc - 12.4ghz. 1.1.3 attenuation values available: see table above. 1.1.4 attenuation accuracy at 25c: 0.5db @ 1 ghz. 1.1.5 vswr: 1.30:1 max. @ 1ghz. 1.1.6 input power: 200 milliwatts cw. 1.1.6.1 full rated power to 125 c, derated linearly to 0 watts at 150 c. 1.1.7 temperature coefficient over operating temperature range: see table above, temperature coefficient tolerance: 0.001 db/db/ c. 1.2 mechanical: 1.2.1 outline dwg: see sheet 2. 1.2.2 workmanship: per mil-prf-55342. 1.3 environmental: 1.3.1 operating temperature range: -55c to +150c 2.0 unit marking: none 3.0 quality assurance: 3.1 verify 100% visual pre-cap in spection performed. per tp-8965. 3.2 perform group a, b and/or c testing as indicated by the part number per tp-8965. 3.3 test data requirements: 3.3.1 test data required for cus tomer - see paragraph 5.0 of tp-8965. 3.3.2 data retention - 24 months. 3.3.3 test samples required for custo mer - see paragraph 5.0 of tp-8965. 4.0 packaging: standard pack per 755w002. (serialized waffle pack)
|
