61 non-reflective terminations (bnc) bnc-tm series materials ordering information part material finish connector body brass nickel plating insulator male contacts brass beryllium copper metal film pvc gold plating gold plating ---------- ---------- female contacts resistor cover ptfe ---------- series name: bnc series tm:indicates a non-reflective termination connector type p: plug type j: jack type power (example) : 05: 0.5 w 1 : 1 w suffix features 1.high performance these wide bandwidth/ultra high matching non- reflective termination use hirose electric original high frequency matching technology. 2.full assortment of 50 ohms and 75 ohms types in addition to the 50 ohms impedance type, plugs and jacks are available in a 75 ohms type. item conditions standard product specifications ratings -10 ? to +65 ? 95 % max. operating temperature range operating relative humidity dc to 3.0 ghz 50 ohms, 75 ohms 0.5 to 1 w frequency range (note) characteristic impedance maximum input power (note) 1.vibration frequency of 10 to 2000 hz, overall amplitude of 1.52 mm, acceleration of 98 m/s 2 for 2 hours in each of 3 directions no electrical discontinuity of 1 s or more no damage, cracks, or parts dislocation 2.shock acceleration of 490 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis 3.temperature cycle temperature: -55 ? +5 ? to +35 ? +85 ? +5 ? to +35 ? time: 30 15 max. 30 15 max. (minutes) 200 cycles no electrical discontinuity of 1 s or more the test method conforms to mil-std-202. note: the frequency range and the maximum input power will differ depending on the products. 1 2 3 4 5 1 2 3 4 5 bnc - tm p - 05 - 1 bnc-tmp-05(03) bnc-tmj-05(02) bnc-tmp-05-2(02) bnc-tmj-05-2(02) bnc-tmp-05-1(01) bnc-tmj-05-1(01) bnc-tmp-05-3(01) bnc-tmj-05-3(01) bnc-tmp-05(75) bnc-tmj-05(75) bnc-tmp-1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
62 specifications typical data bnc-tmp-05(03) 0.5 50 50 0.5 bnc-p 15 bnc-tmj-05(02) 0.5 50 50 0.5 bnc-j 10 bnc-tmp-05-1(01) 0.5 50 50 0.5 bnc-p 15 bnc-tmj-05-1(01) 0.5 50 50 0.5 bnc-j 10 bnc-tmp-05-2(02) 0.5 50 50 0.5 bnc-p 16 bnc-tmj-05-2(02) 0.5 50 50 0.5 bnc-j 11 bnc-tmp-05-3(01) 0.5 50 50 0.5 bnc-p 16 bnc-tmj-05-3(01) 0.5 50 50 0.5 bnc-j 11 bnc-tmp-05(75) 0.5 75 75 2.25 bnc-p(75) 14 bnc-tmj-05(75) 0.5 75 75 2.25 bnc-j(75) 9 bnc-tmp-1 1 50 50 2 bnc-p 16 part number frequency range (ghz) dc ~ 1 1 ~ 3 dc ~ 0.1 dc ~ 1 1 ~ 3 dc ~ 0.1 dc ~ 0.5 0.5 ~ 2 dc ~ 1 1 ~ 2 v.s.w.r. (max) 1.10 1.20 1.10 1.10 1.20 1.10 1.15 1.20 1.15 1.20 power ( w ) impedance ( ohms ) direct current resistance connectors weight (g) 1 1 2 2 1 2 1 2 1 low-cost items with dc to 100 mhz bandwidth limit. 2 cover fitting type the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
63 external dimensions bnc-tmp/tmj-05 series have a 50 ohms or 75 ohms indication for each characteristic impedance. soldering soldering cover cover soldering the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
