(1/3) 004-01 / 20070109 / ea331_crz.fm ? all specifications are subject to change without notice. dc to dc converters non-insulation, dip type crz series specifications and standards built-in output capacitor not built-in output capacitor ? 1 typical input voltage, maximum output current. ? 2 the value for the variation of 10 to 100% rated output current(load variation condition of 2-output product: balance load). ? 3 the value when the temperature is changed from 0 to +50c for the rated input and output. ? 4 the value when the external capacitor(5v output: 33f, 12v and 15v; 10f) is connected to the output side. part no. crz0505nc crz0512pc crz0512nc crz0515pc c rz0515nc crz0524nc crz0512wc CRZ0515Wc maximum output power w 0.5 0.6 0.6 0.6 0.6 0.6 0.24 0.24 input conditions input voltage edc v +4.5 to +5.5(+5typ.) efficiency ? 1 % 65typ. 75typ. 65typ. 75typ. 65typ. 70typ. 65typ. 65typ. output characteristics and others output voltage edc v ?5 +12 ?12 +15 ?15 ?24 12 15 maximum output current ma 100 50 50 40 40 25 10 8 output voltage setting deviation v 0.4max. 0.5max. 0.5max. 0.6max. 0.6max. 0.8max. 0.6max. 0.7max. voltage stability input variation%22323222 load variation ? 2 %22222222 temperature variation ? 3 %54747444 ripple ep-p mv 300typ. 300typ. 300typ. 300typ. 300typ. 500typ. 300typ. 300typ. part no. crz0505n crz0512p crz0512n crz0515p crz0515n crz0524n crz0512w CRZ0515W maximum output power w 0.5 0.6 0.6 0.6 0.6 0.6 0.24 0.24 input conditions input voltage edc v +4.5 to +5.5(+5typ.) efficiency ? 1 % 65typ. 75typ. 65typ. 75typ. 65typ. 70typ. 65typ. 65typ. output characteristics and others output voltage edc v ?5 +12 ?12 +15 ?15 ?24 12 15 maximum output current ma 100 50 50 40 40 25 10 8 output voltage setting deviation v 0.4max. 0.5max. 0.5max. 0.6max. 0.6max. 0.8max. 0.6max. 0.7max. voltage stability input variation%22323222 load variation ? 2 %22222222 temperature variation ? 3 %54747444 ripple ep-p ? 4 mv 200typ. 200typ. 200typ. 200typ. 200typ. 300typ. 200typ. 200typ. conformity to rohs directive conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/3) 004-01 / 20070109 / ea331_crz.fm all specifications are subject to change without notice. shapes and dimensions circuit diagram terminal connection oscillating method: astable frequency method oscillating frequency:approx. 200khz[100% load] to approx. 1200khz[no load] mttf: 226fit[4420000h, 100% load] common specifications output power - ambient temperature(derating) derating is necessary when ambient temperature exceeds 50c. packaging style and quantity exclusive magazine for dc to dc converter?s packaging (25 pieces/magazine) 19.56max. 15.24 2.54 0.5 tdk japan crz-0512pc lot no. 14 9 8 17 7.9 to 8.9 0.2 to 0.3 7.8max. 3min. 5.08max. 0.5 dimensions in mm no.1 vin(+5v input) no.7 gnd no.8 ?v output(not connected when +v output, nc) no.9 +v output(not connected when ?v output, nc) no.14 nc 14 9 8 1 +out ?out nc dc in gnd gnd tdk japan crz-0512pc lot no. 7 overcurrent protection no remote on-off no temperature range operating(c) ?20 to +70[derating is necessary when operating environment temperature exceed 50c.] storage(c) ?40 to +85 humidity range operating(%)rh 20 to 95[maximum wet-bulb temperature: 38c, without dewing] storage(%)rh 20 to 95[maximum wet-bulb temperature: 38c, without dewing] external dimensions 19.56 5.08 7.8mm[w h d] weight 1.6g 0 ?10 ?20 20 30 40 50 60 70 80 10 100 80 60 40 0 20 output power(%) ambient temperature( c)
(3/3) 004-01 / 20070109 / ea331_crz.fm all specifications are subject to change without notice. precautions parallel operation to increase output current is not possible. input fuse a fuse(3.15v input/0.4a, 5v input/0.25a) should be connected to the input. wiring between the input power supply and the converter should be short so as to reduce impedance as much as possible. how- ever, if the input line impedance is high, installation of an input capacitor is recommended. on the built-in output capacitor type, if an external capacitor is used, the capacitance should be less than 10f. as for an output capacitor non-incorporated product, install the components according to the diagram shown below. soldering conditions dipping: 2605c, 10s cleaning conditions solvent: ipa old and new products compatible table 98 1 +v output ?v output input power supply vin gnd gnd c 3 c 2 7 + c 1 + + c1:16v,33f c2,c3:35v,10f(vo>5v) 16v,33f(vo=5v) old product old product current product output(w) input voltage(v) output voltage(v) rzc12p25 crz0512pc 0.3 5 +12 rzc15p20 crz0515pc 0.3 5 +15 rzc05n35 crz0505nc 0.175 5 ?5 rzc05n50 crz0505nc 0.25 5 ?5 rzc12n25 crz0512nc 0.3 5 ?12 rzc15n20 crz0515nc 0.3 5 ?15 rzc12w20 crz0512wc 0.24 5 12 rzc15w16 CRZ0515Wc 0.24 5 15 rz12p25 crz0512p 0.3 5 +12 rz15p20 crz0515p 0.3 5 +15 rz05n35 crz0505n 0.175 5 ?5 rz05n50 crz0505n 0.25 5 ?5 rz12n25 crz0512n 0.3 5 ?12 rz15n20 crz0515n 0.3 5 ?15 rz12w20 crz0512w 0.24 5 12 rz15w16 CRZ0515W 0.24 5 15 bxc005s cbk0505sf cck0505sf 1.2 5 5
|
