ci series r small package size! r compatible with reflow solder techniques (withstands 260 c for 10 seconds). r color code marking available. r available on 8mm plastic tape & reel. r super-mini 0603 size in development. features rcd components inc., 520 e. industrial park dr., manchester, nh usa 03109 tel: (603) 669-0054 fax:(603) 669-5455 e-mail: rcdcompinc@aol.com www.rcd-comp.com miniature surface mount chip inductors temperature range -55c to +155c t.c. of inductance +100ppm/c typ. thermal shock mil-std-202, m. 107 dielectric strength 50v dc min. dist. capacitance 0.27 pf max. terminations pt-pd-ag solderability 95% coverage, min. specifications inductance, q hp4342a srf megacycle meter resistance esi 1700/1701 measuring equipment one method to achieve a higher self-resonant frequency is to use two inductors in series (each inductor to be half of the required value). application note rcd ty p e induc. ( m m h)* q (min.) test freq. (mhz) srf (mhz) max. dcr (ohm) rated current (ma) ci1008 .056 .068 .082 .1 .12 52 50 50 27 26 50 50 50 25 25 1000 900 820 820 820 .18 .20 .22 .56 .63 1410 1330 1270 800 750 .15 .18 .22 .27 .33 25 25 28 28 30 25 25 25 25 25 820 700 600 550 500 .70 .77 .84 .91 1.05 720 680 650 630 590 .39 .47 .56 .62 .68 30 30 30 30 30 25 25 25 25 25 460 430 410 370 340 1.12 1.19 1.33 1.40 1.47 570 550 520 510 500 .75 .82 .91 1.0 1.2 33 33 33 34 20 25 25 25 25 7.9 330 320 300 290 200 1.54 1.61 1.68 1.75 2.0 490 480 470 460 430 1.5 1.8 2.2 2.7 3.3 20 20 20 20 20 7.9 7.9 7.9 7.9 7.9 160 150 140 11 0 90 2.3 2.6 2.8 3.2 3.4 400 370 360 340 330 3.9 4.7 5.6 6.8 8.2 10 20 20 38 37 37 38 7.9 7.9 7.9 7.9 7.9 7.9 70 60 80 70 65 60 3.6 4.0 1.8 2.0 2.6 2.9 320 300 245 235 220 210 * inductance values as low as 2.7nh are available, consult factory. rcd ty p e induc. ( m m h)* q (min.) test freq. (mhz) srf (mhz) max. dcr (ohm) rated current (ma) ci0805 .0056 .0068 .0082 .01 .012 25 30 35 40 40 500 500 500 500 500 6000 5500 5000 4500 4000 .04 .05 .06 .06 .06 900 800 700 700 700 .015 .018 .022 .027 .033 40 45 45 50 45 500 500 500 500 500 3500 3300 2600 2500 2150 .07 .07 .09 .09 .12 670 670 600 600 350 .039 .047 .056 .068 .082 50 45 45 45 40 500 500 500 500 500 2060 1900 1700 1500 1450 .12 .13 .14 .19 .21 550 500 480 410 390 .1 .12 .15 .18 40 40 35 35 500 250 250 250 1350 1250 1120 1050 .26 .44 .45 .47 350 270 270 260 .22 .27 .33 .39 35 35 35 35 100 100 100 100 950 870 800 730 .55 1 1 1.9 240 180 180 130 .47 .56 .68 .82 1.0 35 35 20 20 20 100 100 25.2 25.2 7.96 660 600 450 400 350 2.4 3.2 .5 .55 .6 11 5 100 250 240 230 rcd type l.01[.254] w.01[.254] h max. t.01[.254] ci0805 .08 [2.0] .060 [1.5] .055 [1.4] .010 [.25] ci1008 .106[2.7] .080 [2.03] .110[2.8] .024[.61] special modifications r non-standard inductance values r wraparound terminations r increased q or srf levels r termination material r flat-top design for vacuum pick-up resist ors w coils w delay lines faxxx specifications subject to change without notice suggested pad layout 12345678 1 234567 8 1 234567 8 1 234567 8 1 234567 8 1 234567 8 1 234567 8 1 234567 8 12345678 1234567 1 23456 7 1 23456 7 1 23456 7 1 23456 7 1 23456 7 1 23456 7 1 23456 7 1234567 .08 - ? ? . 04 ? ? . 05 preliminary also indicate if parts require any special modifications. p/n designation: rcd type inductance value: in microhenries (uh) tolerance : m=20%, k=10%, j=5% packaging : b = bulk, t = tape & reel (rcd option if not specified by customer.) ci1008 - 1h k t
|
