do not scale from this print "a" .045 sq ref .025 sq ref .100 2 max sway (any direction) surface mount: styles -02, -04, -06 .200 ref 4 power pos only: {(no of signal pos x .100) + (4 power pos x .200) + .080} .010 less than 4 power pos: {(no of signal pos x .100) + (no of power pos x .200) + .050} .010 .100 ref .060 ref .200 ref (no of positions -1) x .1000 (no of power positions -1) x .2000 01 02 63 64 01 04 90 - 0 + 5 .050 .010 .280 ref see note 2 hpmc-1xx-xx-xx-x-xx no of positions -02 thru -24 (per row) row specification -d: double (use hpmc-xx-d-x) lead style -01, -03, *-05: through hole -02, -04, *-06: surface mount (t-1s6-xx-xx-2 & t-1s8-04-xx) [see table 1] plating specification -t: tin (use t-1s6-xx-t-2 & t-1s8-04-t) -l: light selective gold (use t-1s6-xx-l-2 & t-1s8-04-t) -tm: matte tin (use t-1s6-xx-t-2 & t-1s8-04-t) -lm: light selective gold, matte tin tail (use t-1s6-xx-l-2 & t-1s8-04-t) power positions -02 thru -04 (use t-1s8-04-xx) * = not tooled n "b" .095 .010 surface mount: in-process 2 for power end tube: pt-1-24-15-29 plug: tp-07 packaging view "b" .190 (see note 7) surface mount: in-process 1 for power end "l" .100 .010 (see note 7) through hole: styles -01, -03, -05 [different as shown, otherwise same as surface mount] * = for bottom mount & pass through c c1 c2 c3 c5 c4 tube: pt-1-24-02-53 plug: tp-03 surface mount through hole n c6 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 2 .xxx: .005 .xxxx: .0020 material: hi power male combo by: hpmc-1xx-xx-xx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 2/15/1999 1 1 sheet scale: 1:1 insulator: vectra e130i color: black signal terminal: phos bronze power terminal: cda 7025 c:\enterprisevault\dwg\misc\mktg\hpmc-1xx-xx-xx-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. coplanarity (see table 2) 3. burr allowance: .0015 max. 4. maximum cut flash: .020. 5. minimum pushout force: 1.0 lb. 6. maximum allowable bow: .002 inch/inch after assembly. 7. power end tails sheared to achieve dimension shown. 8. tin plated pins must be filled in the same way as the selective plated pins to reduce the number of band marks in the post area. revision n
|
