1 ss subminiature basic switch subminiature basic switch offers long life and high reliability a design that combines simplicity and stability by the use of two split springs ensures a long durabil- ity of 30,000,000 operations. a variety of models are available, with operating force ranging from low to high. available by 10.1 a, 5 a, and 0.1 a models. ordering information model number legend 1. ratings 10: 10.1 a at 125 vac 5: 5 a at 125 vac 01: 0.1 a at 30 vdc 2. actuator none: pin plunger gl: hinge lever gl13: simulated roller lever gl2: hinge roller lever 3. maximum operating force (see note 1) none: 1.47 n {150 gf} -f: 0.49 n {50 gf} (0.1 a, 5 a) -e: 0.25 n {25 gf} (0.1 a) note: these values are for pin plunger models. 4. contact form none: spdt -2: spst-nc -3: spst-no 5. terminals none: solder terminals t: quick-connect terminals (#110) d: pcb terminals (see note 2) 6. special code none: standard (85c) -t: heat resistive (120c) rohs compliant ss-@@@@@@ 1 2 3 4 5 6
2 ss ss list of models standard models actuator terminal contact form rating of max. 10.1 a 5 a 0.1 a pin plunger solder terminal spdt 1.47 n {150 gf} ss-10 ss-5 ss-01 spst-nc ss-10-2 ss-5-2 ss-01-2 cpst-no ss-10-3 ss-5-3 ss-01-3 quick-connect terminal (#110) spdt ss-10t ss-5t ss-01t spst-nc ss-10-2t ss-5-2t ss-01-2t cpst-no ss-10-3t ss-5-3t ss-01-3t pcb terminal spdt ss-10d ss-5d ss-01d spst-nc ss-10-2d ss-5-2d ss-01-2d cpst-no ss-10-3d ss-5-3d ss-01-3d solder terminal spdt 0.49 n {50 gf} --- ss-5-f ss-01-f spst-nc --- ss-5-f-2 ss-01-f-2 cpst-no --- ss-5-f-3 ss-01-f-3 quick-connect terminal (#110) spdt --- ss-5-ft ss-01-ft spst-nc --- ss-5-f-2t ss-01-f-2t cpst-no --- ss-5-f-3t ss-01-f-3t pcb terminal spdt --- ss-5-fd SS-01-FD spst-nc --- ss-5-f-2d ss-01-f-2d cpst-no --- ss-5-f-3d ss-01-f-3d solder terminal spdt 0.25 n {25 gf} --- --- ss-01-e spst-nc --- --- ss-01-e-2 cpst-no --- --- ss-01-e-3 quick-connect terminal (#110) spdt --- --- ss-01-et spst-nc --- --- ss-01-e-2t cpst-no --- --- ss-01-e-3t pcb terminal spdt --- --- ss-01-ed spst-nc --- --- ss-01-e-2d cpst-no --- --- ss-01-e-3d hinge lever solder terminal spdt 0.49 n {50 gf} ss-10gl ss-5gl ss-01gl spst-nc ss-10gl-2 ss-5gl-2 ss-01gl-2 cpst-no ss-10gl-3 ss-5gl-3 ss-01gl-3 quick-connect terminal (#110) spdt ss-10glt ss-5glt ss-01glt spst-nc ss-10gl-2t ss-5gl-2t ss-01gl-2t cpst-no ss-10gl-3t ss-5gl-3t ss-01gl-3t pcb terminal spdt ss-10gld ss-5gld ss-01gld spst-nc ss-10gl-2d ss-5gl-2d ss-01gl-2d cpst-no ss-10gl-3d ss-5gl-3d ss-01gl-3d solder terminal spdt 0.16 n {16 gf} --- ss-5gl-f ss-01gl-f spst-nc --- ss-5gl-f-2 ss-01gl-f-2 cpst-no --- ss-5gl-f-3 ss-01gl-f-3 quick-connect terminal (#110) spdt --- ss-5gl-ft ss-01gl-ft spst-nc --- ss-5gl-f-2t ss-01gl-f-2t cpst-no --- ss-5gl-f-3t ss-01gl-f-3t
3 ss ss hinge lever pcb terminal spdt 0.16 n {16 gf} --- ss-5gl-fd ss-01gl-fd spst-nc --- ss-5gl-f-2d ss-01gl-f-2d cpst-no --- ss-5gl-f-3d ss-01gl-f-3d solder terminal spdt 0.08 n {8 gf} --- --- ss-01gl-e spst-nc --- --- ss-01gl-e-2 cpst-no --- --- ss-01gl-e-3 quick-connect terminal (#110) spdt --- --- ss-01gl-et spst-nc --- --- ss-01gl-e-2t cpst-no --- --- ss-01gl-e-3t pcb terminal spdt --- --- ss-01gl-ed spst-nc --- --- ss-01gl-e-2d cpst-no --- --- ss-01gl-e-3d simulated roller lever solder terminal spdt 0.49 n {50 gf} ss-10gl13 ss-5gl13 ss-01gl13 spst-nc ss-10gl13-2 ss-5gl13-2 ss-01gl13-2 cpst-no ss-10gl13-3 ss-5gl13-3 ss-01gl13-3 quick-connect terminal (#110) spdt ss-10gl13t ss-5gl13t ss-01gl13t spst-nc ss-10gl13-2t ss-5gl13-2t ss-01gl13-2t cpst-no ss-10gl13-3t ss-5gl13-3t ss-01gl13-3t pcb terminal spdt ss-10gl13d ss-5gl13d ss-01gl13d spst-nc ss-10gl13-2d ss-5gl13-2d ss-01gl13-2d cpst-no ss-10gl13-3d ss-5gl13-3d ss-01gl13-3d solder terminal spdt 0.16 n {16 gf} --- ss-5gl13-f ss-01gl13-f spst-nc --- ss-5gl13-f-2 ss-01gl13-f-2 cpst-no --- ss-5gl13-f-3 ss-01gl13-f-3 quick-connect terminal (#110) spdt --- ss-5gl13-ft ss-01gl13-ft spst-nc --- ss-5gl13-f-2t ss-01gl13-f-2t cpst-no --- ss-5gl13-f-3t ss-01gl13-f-3t pcb terminal spdt --- ss-5gl13-fd ss-01gl13-fd spst-nc --- ss-5gl13-f-2d ss-01gl13-f-2d cpst-no --- ss-5gl13-f-3d ss-01gl13-f-3d solder terminal spdt 0.08 n {8 gf} --- --- ss-01gl13-e spst-nc --- --- ss-01gl13-e-2 cpst-no --- --- ss-01gl13-e-3 quick-connect terminal (#110) spdt --- --- ss-01gl13-et spst-nc --- --- ss-01gl13-e-2t cpst-no --- --- ss-01gl13-e-3t pcb terminal spdt --- --- ss-01gl13-ed spst-nc --- --- ss-01gl13-e-2d cpst-no --- --- ss-01gl13-e-3d actuator terminal contact form rating of max. 10.1 a 5 a 0.1 a
4 ss ss heat resistive models hinge roller lever solder terminal spdt 0.49 n {50 gf} ss-10gl2 ss-5gl2 ss-01gl2 spst-nc ss-10gl2-2 ss-5gl2-2 ss-01gl2-2 cpst-no ss-10gl2-3 ss-5gl2-3 ss-01gl2-3 quick-connect terminal (#110) spdt ss-10gl2t ss-5gl2t ss-01gl2t spst-nc ss-10gl2-2t ss-5gl2-2t ss-01gl2-2t cpst-no ss-10gl2-3t ss-5gl2-3t ss-01gl2-3t pcb terminal spdt ss-10gl2d ss-5gl2d ss-01gl2d spst-nc ss-10gl2-2d ss-5gl2-2d ss-01gl2-2d cpst-no ss-10gl2-3d ss-5gl2-3d ss-01gl2-3d solder terminal spdt 0.16 n {16 gf} --- ss-5gl2-f ss-01gl2-f spst-nc --- ss-5gl2-f-2 ss-01gl2-f-2 cpst-no --- ss-5gl2-f-3 ss-01gl2-f-3 quick-connect terminal (#110) spdt --- ss-5gl2-ft ss-01gl2-ft spst-nc --- ss-5gl2-f-2t ss-01gl2-f-2t cpst-no --- ss-5gl2-f-3t ss-01gl2-f-3t pcb terminal spdt --- ss-5gl2-fd ss-01gl2-fd spst-nc --- ss-5gl2-f-2d ss-01gl2-f-2d cpst-no --- ss-5gl2-f-3d ss-01gl2-f-3d solder terminal spdt 0.08 n {8 gf} --- --- ss-01gl2-e spst-nc --- --- ss-01gl2-e-2 cpst-no --- --- ss-01gl2-e-3 quick-connect terminal (#110) spdt --- --- ss-01gl2-et spst-nc --- --- ss-01gl2-e-2t cpst-no --- --- ss-01gl2-e-3t pcb terminal spdt --- --- ss-01gl2-ed spst-nc --- --- ss-01gl2-e-2d cpst-no --- --- ss-01gl2-e-3d actuator terminal contact form rating of max. 10.1 a 5 a 0.1 a actuator terminal contact form rating of max. 10.1 a 5 a 0.1 a pin plunger solder terminal spdt 1.47 n {150 gf} ss-10-t ss-5-t ss-01-t quick-connect ss-10t-t ss-5t-t ss-01t-t pcb terminal ss-10d-t ss-5d-t ss-01d-t hinge lever solder terminal 0.49 n {50 gf} ss-10gl-t ss-5gl-t ss-01gl-t quick-connect ss-10glt-t ss-5glt-t ss-01glt-t pcb terminal ss-10gld-t ss-5gld-t ss-01gld-t simulated roller lever solder terminal 0.49 n {50 gf} ss-10gl13-t ss-5gl13-t ss-01gl13-t quick-connect ss-10gl13t-t ss-5gl13t-t ss-01gl13t-t pcb terminal ss-10gl13d-t ss-5gl13d-t ss-01gl13d-t hinge roller lever solder terminal 0.49 n {50 gf} ss-10gl02-t ss-5gl02-t ss-01gl02-t quick-connect ss-10gl02t-t ss-5gl02t-t ss-01gl02t-t pcb terminal ss-10gl02d-t ss-5gl02d-t ss-01gl02d-t
5 ss ss specifications ratings note: the ratings values apply under the following test condi- tions: ambient temperature: 20 2 c ambient humidity: 65 5% operating frequency: 30 operations/min characteristics note: 1. the data given above are initial values. 2. the dielectric strength shown in the table indicates a value for models with a separator. 3. for the pin plunger models, the above values apply for use at bot h the free position and total travel position. for the lever m odels, they apply at the total travel position. 4. lever-type models: total travel position (wit h a contact separation time of 1 ms max.) 5. for testing conditions, contact your omron sales representative. item resistive load model rated voltage ss-10 250 vac 10.1 a ss-5 125 vac 250 vac 5 a 3 a ss-01 125 vac 0.1 a 30 vdc 0.1 a operating speed 0.1 mm to 1 m/s (pin plunger models) operating frequency mechanical:400 operations/min max. electrical:30 operations/min max. insulation resistance 100 m ? min. (at 500 vdc) contact resistance (initial value) of 1.47 n {150 gf}: ss-10, ss-5 models:30 m ? max. ss-01 models:50 m ? max. of 0.49 n {50 gf}: ss-5 models:50 m ? max. ss-01 models:100 m ? max. of 0.25 n {25 gf}: ss-01 models:150 m ? max. dielectric strength (see note 2) 1,000 vac (600 vac for ss-01 models), 50/60 hz for 1 min between terminals of the same polarities 1,500 vac, 50/60 hz for 1 min between current-carrying metal part and ground, and between each ter- minal and non-current-carrying metal part vibration resistance (see note 3) malfunction: 10 to 55 hz, 1.5-mm double amplitude shock resistance (see note 4) destruction: of 1.47 n {150 gf}:1,000 m/s 2 {approx. 100g} max. of 0.25 n {25gf}/0.49 n {50 gf}:500 m/s 2 {approx. 50g} max. malfunction: of 1.47 n {150 gf}:300 m/s 2 {approx. 30g} max. of 0.25 n {25 gf}/0.49 n {50 gf}:200 m/s 2 {approx. 20g} max. durability (see note 5) mechanical: 30,000,000 operations min. (60 o perations/min) (refer to the following engineering data .) 10,000,000 operations min. (60 operations/min) for ss-10 models electrical: 200,000 operations min. (30 operations/min) (refer to the following engineering data .) 50,000 operations min. (30 oper ations/min) for ss-10 models degree of protection iec ip40 degree of protection against electrical shock class i proof tracking index (pti) 175 ambient operating tempera- ture ?25 c to 85 c (at ambient humidity of 60% max.) (with no icing or condensation) ambient operating humidity 85% max. (for 5 c to 35 c) weight approx. 1.6 g (pin plunger models)
6 ss ss approved standards consult your omron sales repr esentative for specific models with standard approvals. ul1054 (file no. e41515)/csa c22.2 no. 55 (file no. lr21642) en61058-1 (file no. 129246 for ss-5, 125256 for ss-10, vde approval) testing conditions: 5e4 (50,000 operations); t85 (0 c to 85 c). contact specifications note: for more information on the minimum applicable load, refer to using micro loads on page 9. contact form dimensions note: all units are in millimeters unless otherwise indicated. terminals terminal plate thickness is 0.5 mm for all models. mounting holes rated voltage ss-10 ss-5 ss-01 125 vac 250 vac --- 10.1 a 5 a 3 a 0.1 a --- 30 vdc --- --- 0.1 a rated voltage ss-10 ss-5 250 vac 10 a 5 a item ss-10 ss-5 ss-01 contact specification rivet crossbar material silver alloy silver gold alloy gap (standard value) 0.5 mm 0.25 mm inrush current nc 20 a max. 1 a max. no 15 a max. 10 a max. 1 a max. minimum applicable load (see note) 160 ma at 5 vdc 1 ma at 5 vdc spdt spst-nc spst-no solder terminals quick-connect terminals (#110) pcb terminals three, 1.6-dia. holes com terminal (c) no terminal nc terminal 2.9 1.6 8.8 7.3 9.5 0.1 19.8 6.4 3.2 6.4 three, 1.2 dia. com terminal (c) no terminal nc terminal 2.9 1.6 8.8 7.3 9.5 0.1 19.8 10.6 2.8 3.2 7.1 t = 0.5 com terminal (c) no terminal nc terminal 2.9 1.6 8.8 7.3 9.5 0.1 19.8 3.3 0.6 7.0 0.5 1.2 3.2 pcb mounting dimensions (reference) three, 1.35 to 1.5 dia. 8.8 +0.15 ?0.05 (1.6) 16.1 0.1 two, 2.4-dia. mounting holes or m2.3 screw holes 9.5 0.1
7 ss ss dimensions and operat ing characteristics note: 1. all units are in millimeters unless otherwise indicated. 2. the following illustration and drawing are for solder terminal models. refer to page 6 for details on models with quick-connect terminals (#110) or pcb terminals. 3. unless otherwise specifie d, a tolerance of 0.4 mm applies to all dimensions. 4. the operating characteristics are for operation in the a direction ( ). note: the values indicated in parentheses are refe rence values for cases when the installation direction is such that the lever weigh t is not applied to the plunger. model ss-10 ss-5 ss-01 ss-5-f ss-01-f ss-01-e of max. rf min. 1.47 n {150 gf} 0.25 n {25 gf} 1.47 n {150 gf} 0.25 n {25 gf} 0.49 n {50 gf} 0.04 n {4 gf} 0.25 n {25 gf} 0.02 n {2 gf} pt max. ot min. md max. 0.6 mm 0.4 mm 0.12 mm 0.5 mm 0.5 mm 0.1 mm 0.5 mm 0.5 mm 0.1 mm 0.5 mm 0.5 mm 0.1 mm op 8.4 0.5 mm model ss-10gl ss-5gl ss-01gl ss-5gl-f ss-01gl-f ss-01gl-e of max. rf min. 0.49 n {50 gf} 0.06 n {6 gf} 0.49 n {50 gf} 0.06 n {6 gf} 0.16 n {16 gf} 0.02 n {2 gf} 0.08 n {8 gf} 0.01 n {1 gf} (reference value) ot min. md max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm fp max. op 13.6 mm 8.8 0.8 mm pin plunger models ss-10 ss-5(-f) ss-01(-f, -e) 2.35 +0.075 -0.05 dia. holes 2.35 +0.075 -0.05 10.2 9.5 7.5 2 pt op 6.4 2.9 2.5 1.6 8.8 7.3 5.1 19.8 3.2 6.4 3.2 6.4 9.5 0.1 a three, 1.6 dia. 2.5 0.07 dia. 2.35 +0.075 ?0.05 2.35 +0.075 ?0.05 dia. holes hinge lever models ss-10gl ss-5gl(-f) ss-01gl(-f, -e) 2.35 +0.075 -0.05 (see note 1) 2.35 +0.075 -0.05 dia. holes 6.4 3.2 6.4 3.6 14.5 (see note 2) fp op 10.2 9.5 2.5 0.07 dia. 2.52.9 8.8 7.3 5.1 19.8 9.5 0.1 note: 1.6 a t = 0.3 (see note 1) three, 1.6 dia. 2.35 +0.075 ?0.05 dia. holes 2.35 +0.075 ?0.05 1. stainless-steel lever 2. besides the ss- @ gl models with a hinge lever length of 14.5, the ss- @ gl11 models with a hinge lever length of 18.5, the ss-@ gl111 models with a hinge lever length of 22.6, and the ss- @ gl1111 models with a hinge lever length of 37.8 are available. contact your omron representative for these models
8 ss ss note: the values indicated in parentheses are refe rence values for cases when the installation direction is such that the lever weigh t is not applied to the plunger. note: the values indicated in parentheses are refe rence values for cases when the installation direction is such that the lever weigh t is not applied to the plunger. model ss-10gl13 ss-5gl13 ss-01gl13 ss-5gl13-f ss-01gl13-f ss-01gl13-e of max. rf min. 0.49 n {50 gf} 0.06 n {6 gf} 0.49 n {50 gf} 0.06 n {6 gf} 0.16 n {16 gf} 0.02 n {2 gf} 0.08 n {8 gf} 0.01 n {1 gf} (reference value) ot min. md max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm fp max. op 15.5 mm 10.7 0.8 mm model ss-10gl2 ss-5gl2 ss-01gl2 ss-5gl2-f ss-01gl2-f ss-01gl2-e of max. rf min. 0.49 n {50 gf} 0.06 n {6 gf} 0.49 n {50 gf} 0.06 n {6 gf} 0.16 n {16 gf} 0.02 n {2 gf} 0.08 n {8 gf} 0.01 n {1 gf} (reference value) ot min. md max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm fp max. op 19.3 mm 14.5 0.8 mm simulated roller lever models ss-10gl13 ss-5gl13(-f) ss-01gl13(-f, -e) 2.35 +0.075 -0.05 2.35 +0.075 -0.05 dia. holes 1.3r t = 0.3 (see note) 2.5 0.07 dia. fp op 10.2 9.5 6.4 3.2 6.4 3.6 8.8 7.3 5.1 15.8 2.5 2.9 19.8 9.5 0.1 note: 1.6 a three, 1.6 dia. 2.35 +0.075 ?0.05 1.3r 2.35 +0.075 ?0.05 dia. holes stainless-steel spring leve r hinge roller lever models ss-10gl2 ss-5gl2(-f) ss-01gl2(-f, -e) 2.5 0.07 dia. t = 0.3 (see note 1) 2.5 2.9 14.5 fp op 10.2 9.5 6.4 8.8 7.3 5.1 19.8 3.2 6.4 9.5 0.1 1.6 note: 2. polyacetal resin roller a 2.35 +0.075 ?0.05 dia. 2.35 +0.075 ?0.05 dia. holes 4.8 dia. 3.2 (see note 2) three, 1.6 dia. 1. stainless-steel spring leve r
9 ss ss precautions refer to general information . cautions terminal connection when soldering the lead wire to the terminal, first insert the lead wire conductor through the terminal hole and then conduct sol- dering. make sure that the capacity of the soldering iron is 60 w maxi- mum. do not take more than 350c for the temperature at the tip of the soldering iron. do not take more than 5 s to solder the switch terminal. improper soldering involving an excessively high temperature or excessive soldering time may deteriorate the char- acteristics of the switch. be sure to apply only the minimum required amount of flux. the switch may have contact failures if flux intrudes into the interior of the switch. use the following lead wires to connect to the solder terminals. if the pcb terminal models are soldered in the solder bath, flux will permeate inside the switch and cause contact failure. there- fore, manually solder the pcb terminal. wire the quick-connect terminals (#110) with receptacles. insert the terminals straight into the receptacles. do not impose exces- sive force on the terminal in the horizontal direction, otherwise the terminal may be deformed or the housing may be damaged. insulation distance according to en61058-1, the minimum insulation thickness for this switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.6 mm. if the insulation distance cannot be provided in the product incorporat- ing the switch, either use a switch with insulation barrier or use a separator to ensure sufficient insu lation distance. refer to sepa- rator. correct use mounting turn off the power supply before mounting or removing the switch, wiring, or performing ma intenance or inspection. failure to do so may result in electric shock or burning. use m2.3 mounting screws with plane washers or spring washers to securely mount the switch. tighten the screws to a torque of 0.23 to 0.26 nm {2.3 to 2.7 kgfcm}. mount the switch onto a flat surface. mounting on an uneven sur- face may cause deformation of the switch, resulting in faulty oper- ation or breakage in the housing. operating stroke setting take particular care in setting the operating stroke for the pin plunger models. make sure that the operating stroke is 70% to 100% of the rated ot distance. do not operate the actuator exceeding the ot distance, otherwise the durability of the switch may be shortened. using micro loads using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. use models that operate in the following range. however, even when using micro load models within the operating range shown below, if inrush current occurs when the contact is opened or closed, it may increase contact wear and so dec rease durability. therefore, insert a contact protection circuit where necessary. the minimum applicable load is the n-level reference value. this value indicates the malfunction reference level for the reliability level of 60% ( 60). the equation, 60 = 0.5 10 ?6 /operations indicates that the estimated malfunction rate is less than 1/ 2,000,000 operations with a reliability level of 60%. separators note: the material is eavtc (epoxide alkyd varnished tetron cloth) and its heat-resisting temperature is 130 c. connector refer to terminal connectors. model conductor size ss-5 0.5 to 0.75 mm 2 ss-10 0.75 mm 2 applicable switch thickness (mm) model (see note) ss, d2s, d2sw 0.18 separator for ss0.18 0.4 separator for ss0.4 operating range for micro load models ss-01 operating range for general-load models ss-5, ss-10 current (ma) inoperable range voltage (v) separator separator for ss @ all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0. 03937. to convert grams into ounces, multiply by 0.03527. cat. no. b032-e1-12
|
