View M62301FP_7465596.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation ( http://www.renesas.com ) send any inquiries to http://www.renesas.com/inquiry .
notice 1. all information included in this document is current as of th e date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology de scribed in this document for any purpose re lating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or om issions from the information included herein. 7. renesas electronics products are classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product depends on the product?s quality grade, as indicated below. you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application categorized as ?specific? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intended where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electronics data sheets or data books, etc. ?standard?: computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. ?high quality?: transportation equipment (automobiles, trains, ship s, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specifically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use re nesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of c ontrolled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any fo rm, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
rej03d0861-0300 rev.3.00 mar 25, 2008 page 1 of 11 m62301sp/fp 10 to 12-bit 4-ch integrating a/d converter rej03d0861-0300 rev.3.00 mar 25, 2008 description m62301 semiconductor integrated circuit forms an integrating a/d converter, being connected to a microcomputer unit. by using selection signals and counter clock signals from the unit, a 10 to 12-bit a/d converter can be created at a low cost. the integration time and resolution can be set at the users option by changing external parameters. in addition, the built-in circuit offset, delay time and temperature fluctuation are adjustable, enabling a wide range of applications. m62301 has a 3 input decoder circuit, high-precision refere nce voltage (1.22 v) generator, current supply and comparator for integration, and voltage-monitoring reset circ uit for a 5 v power supply. it is also equipped with girdling to prevent current leak from integration capacitor. features ? separate power supplies for analog section and digital section. ? low power dissipation: 2 ma (typ) (1 ma for a/d conversion and the other 1 ma for reset) ? linear error: 0.02% (typ) ? conversion time: 526 s/ch (typ) ? built-in system reset: 4.45 v (typ) application high-precision control systems such as temperature control and speed control block diagram + ? + ? + ? + ? 19 18 17 16 15 5 1 6 13 12 11 10 20 14 7 8 9 2 3 4 a1 a2 a3 int v cc for reset rese t a4 a1 a2 a3 a4 gnd v ref v ref 1.22 v reference input reference voltage integrating capacitor guard ring 1 guard ring 2 c0 c1 c2 constant current control analog v cc analog gnd digital gnd digital v dd 0.49 v discharge decoder 0.36 v logic control delay circuit 150 s
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 2 of 11 pin arrangement 4 1 2 3 5 17 20 19 18 16 6 7 15 14 8 13 9 12 10 11 outline: prdp0020ba-a (20p4b) prsp0020da-a (20p2n-a) m62301sp/fp (top view) v cc for reset c0 c1 c2 int reset guard ring 1 integrating capacitor guard ring 2 analog gnd digital gnd a1 a2 a3 a4 reference input digital v dd reference voltage constant current control analog v cc absolute maximum ratings (ta = 25 c, unless otherwise noted) item symbol ratings unit analog section supply voltage v cc 15 v digital section supply voltage v dd 8 v digital input voltage v id ?0.3 to v dd + 0.3 v analog input voltage v ia ?0.3 to v dd + 0.3 v int output current i oint 6 ma reset output current i ore 6 ma int output withstand voltage v int 15 v reset output withstand voltage v reset 15 v reset supply voltage v re 6 v power dissipation pd 990 (p) / 660 (fp) mw thermal derating k 9.9 (p) / 6.6 (fp) mw/ c operating temperatur e topr ?20 to +75 c storage temperature tstg ?40 to +125 c
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 3 of 11 recommended operating conditions (ta = 25 c, unless otherwise noted) limits item symbol min typ max unit analog section supply voltage v cc 4.5 8.0 12.0 v digital section supply voltage v dd 4.5 5.0 5.5 v analog input voltage range (i l = 50 a) v ia 0 ? no more than (v cc ? 2.5 v) and v dd * 1 v reference input voltage (i l = 50 a) v ir 1 ? no more than (v cc ? 2.5 v) and v dd * 1 v integration capacity c i 300 ? 22000 pf resistance to determine charge current r i 6 ? 60 k ? output current i o ? ? 4 ma note: 1. maximum analog input voltage is less than the difference between v cc ? 2.5 v as well as v dd . charging current i i = v ref r1 electrical characteristics (v cc = 5.0 v, v dd = 5.0 v, ta = 25c, unless otherwise noted) limits item symbol min typ max unit test conditions supply current i cc ? 1.0 2.0 ma 2.5 i l = 100 a analog input voltage range v ia 0 ? 2.2 v i l = 200 a reference input voltage v ref 1.17 1.22 1.27 v i ref = 5 a c ref = 4700 pf i ref+ 50 permissible current inflow at reference voltage i ref? ? ? ?10 a conversion error e c ? 0.05 0.1 %/fsr r l = 24 k ? * 1 linear error e l ? 0.02 0.09 %/fsr r l = 24 k ? * 2 conversion time t t ? 526 ? s v ia = 2.5 v, c l = 0.01 f r l = 24 k ? discharge time tdi ? 3 17 s v (8) = 3 v 0.3 v c l = 4700 pf analog input current i b ? ?0.35 ?3.5 a digital input "h" level v ih 3.5 ? ? v digital input "l" level v il ? ? 0.8 v int output "l" level v lint ? 0.1 0.4 v i ol = 1 ma a/d converter int output leak current i ohint ? ? 1 a v (5) = 15 v detection voltage v det 4.30 4.45 4.60 v hysteresis voltage ? v det 30 50 80 mv delay time t de 75 150 300 s reset output "l" level v lre ? 0.1 0.4 v i ol = 1 ma reset output leak current i ohre ? ? 1 a v (6) = 15 v supply current i re ? 1.0 2.0 ma v re = 5 v ? 0.75 1.0 r l = 2.2 k ? , v l re 0.4 v reset section limit operating voltage v opl ? 0.6 0.8 v r l = 100 k ? , v l re 0.4 v notes: 1. conversion error; deviation from the line that links the "0" scale point (mode 0) and reference scale point (mode 3. v fsr = 2.5 v). associated with all channels. 2. linear error; deviation from t he line that links the 0 v input point and 2.5 v input point on a given channel.
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 4 of 11 operating description (1) decoder based on digital inputs to c0, c1, c2, the analog switch is set to on, and the input of "0" scale (gnd input), input of reference scale (reference voltage input), input to a1-a4, or discharge from integration capacitor (c i ) is performed. none of these operations is performed when the "mode 8" input is given: mode 1 2 3 4 5 6 7 8 c0 0 1 0 1 0 1 0 1 c1 0 0 1 1 0 0 1 1 c2 0 0 0 0 1 1 1 1 discharge gnd v ref a1 a2 a3 a4 ? (2) a/d conversion decoder selection mode v in + 0.49 v v ref + 0.49 v 0.49 v 0.36 v v (8) 1 2 1 3 1 4 to 7 1 t in t ref t gnd multiplexer first selects v gnd , obtaining minimum pulse t gnd . it then selects v ref , obtaining reference pulse t ref . input is selected next, obtaining input pulse t in . v in is obtained by deducting t gnd , as the offset, from t ref and t in . v in = v ref ? t in ? t g t ref ? t g by measuring voltage at the maximum input for approximately 500 s under the counter clock of 8 mhz, resolution of approximately 12 bits can be obtained; 500 s 125 ns 2 12 note: to ensure discharge from capacitor c i , the decoder input as in the above diagram should stay in mode 1 at least for the period calculated above: it is not necessary to measure t gnd , and t ref for each channel. tdi = (c i ) v iamax + 0.49 1 ma
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 5 of 11 (3) constant current control integrating current i i can be obtained based on the reference voltage (1.22 v) by the built-in high-precision generator and resistance r i . i i = (a) .................... (1) 1.22 r i integration time t i can be calculated as follows; t i = (v in + 0.49) .................. (2) c i i i however, parameters such as built-in comparator offset voltage, analog switch offset, voltage leak current and delay time are not counted. v ref r i c i i i 13 12 8 1.22 v 50 ma 0.8 v 4.45 v output unsettled t de t de reset supply voltage v re reset output t t when voltage applied to pin v re becomes less than 4.45 v, the reset output status becomes "l". if voltage increases over 4.50 v, the reset status becomes "h" within 150 s.
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 6 of 11 application suggestion 1. 4-channel 11-bit a/d converter system m62301sp/fp to microcomputer 5 v power supply to microcomputer control pin to counter to reset input analog voltage 5 v 10 k 24 k 10 k i i = 50 a 50 a c int 680 pf c ref r i c i 4700 pf 4700 pf charge current i i = 50 a 1.22 v 24 k ? 4 1 2 3 5 17 20 19 18 16 6 7 15 14 813 912 10 11 note: c ref : to stabilize reference voltage, be sure to connect capacitance of approximately 4700 pf. c int : we suggest that this capacitance be connec ted to prevent malfunction due to noise. use c i that leaks as slight current as possible. to prevent leak to the circuit board, we recommend providing guard ring (7), (9). resolution depends on the number of microcomputer counter clock pulses that are generated while the int output status is "high" at the maximum input voltage 2.5 v (v cc ? 2.5 v). when the microcomputer counter clock frequency is 8 mhz, the resolution can be calculated by using the constant calculated above, as follows; 1 8 m 2 11 50 a (2.5 + 0.13) 4700 pf therefore, the resolution of this system is approximately 11 bits.
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 7 of 11 2. 4-channel 12-bit a/d converter system separate power supplies to analog section and digital s ection, analog input voltage range mode wider up to v dd , external reference voltage for integration. m62301sp/fp to microcomputer 5 v power supply to microcompute r 5 v power supply to microcomputer control pin to counter to reset input analog voltage 8 v 2.5 v 10 k 24 k 10 k i i = 50 a 50 a c int 680 pf c ref r i c i 6800 pf 4700 pf 4 1 2 3 5 17 20 19 18 16 6 7 15 14 813 912 10 11 a3 a1 a2 a4 v dd note: c ref : to stabilize reference voltage, be sure to connect capacitance of approximately 4700 pf. c int : we suggest that this capacitance be connec ted to prevent malfunction due to noise. use c i that leaks as slight current as possible. to prevent leak to the circuit board, we recommend providing guard ring (7), (9). because separate power supplies are provided for the analog are digital sections, the m62301 has two supply voltage v cc and v dd , enabling a wide analog input voltage range v ia . the upper limit of the range is required to be no more than the difference between v cc ? 2.5 v as well as v dd , therefore, the analog input voltage range in this application is 0 v to 5 v. when the counter clock frequency is 8 mhz, resolution is; 1 8 m 2 12 50 a (5 + 0.13) 6800 pf an a/d converter system with resolution of approximately 12 bits can be formed.
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 8 of 11 recommended operational settings according to clock frequency, resolution, and time required for discharge (decoder mode 1) counter clock resolution change current i l ( a) resistance to determine constant current r l (k ? ) integration capacitance c l discharge time tdi ( s) 50 24 1400 pf 7.7 10-bit 100 12 2800 pf 15.4 50 24 2800 pf 15.4 11-bit 100 12 5600 pf 30.7 50 24 5600 pf 30.7 8 mhz 12-bit 100 12 12000 pf 65.9 50 24 700 pf 3.9 10-bit 100 12 1400 pf 7.7 50 24 1400 pf 7.7 11-bit 100 12 2800 pf 15.4 50 24 2800 pf 15.4 16 mhz 12-bit 100 12 5600 pf 30.7 note: 1. discharge time the values in this table apply when v iamax is 5 v. 1 ma (v iamax + 0.49) tdi = ( c i )
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 9 of 11 typical characteristics power dissipation pd (mw) standard voltage v ref (v) int output "l" level v lint (v) thermal derating ambient temperature ta ( c) analog part supply current vs. supply voltage analog supply voltage v cc (v) ambient temperature ta ( c) analog input range v ia (v) int output current i o int (ma) linear error standard voltage vs. ambient temperature int output "l" level vs. output current int output vs. ambient temperature ambient temperature ta ( c) analog supply current i cc (ma) linear error el (%/fsr) int output "l" level v lint (mv) 1000 800 600 400 200 0 1.24 1.23 1.22 1.21 1.20 1.19 1.0 0.7 0.4 0.8 0.9 0.6 0.5 0.2 0.1 0.3 0 2.0 1.0 0 0.05 0.04 0.01 0.03 0.02 0 200 100 0 0 ? 20 0 25 50 75 100 125 0 5 10 0 1.0 2.0 2.5 20 40 60 80 0.01 0.1 1 10 ? 200 20406080 (osr) (fsr) r i = 24 k ? r i = 12 k ?
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 10 of 11 reset supply current i re (ma) reset output "l" level v ref (v) output voltage v out (v) reset supply current vs. supply voltage reset voltage v cc v re (v) detection voltage vs. ambient temperature ambient temperature ta ( c) reset output current i ore (ma) ambient temperature ta ( c) reset voltage v cc v re (v) delay time vs. ambient temperature reset output "l" level vs. output current limit reset voltage detection voltage v det (v) delay time t de ( s) 2.0 1.6 1.2 1.8 1.4 1.0 0.6 0.2 0.8 0.4 0 1.0 0.8 0.9 0.6 0.7 0.5 0.4 0.3 0.2 0.1 0 2.0 1.6 0.8 1.8 1.4 1.0 1.2 0.4 0.2 0.6 0 4.7 4.6 4.5 4.3 4.4 4.2 250 200 100 150 50 0 0 0.01 1357 2468910 ? 20 20 0406080 ? 20 20 0 406080 0.1 1 10 00.61.0 2.0 r l = 100 k ? r l = 2.2 k ?
m62301sp/fp rej03d0861-0300 rev.3.00 mar 25, 2008 page 11 of 11 package dimensions 2.028 1.528 4.5 a 1 b 3 15 e 1.778 c l 3.0 0.51 0.9 1.0 1.3 a e 6.15 6.3 6.45 d 18.8 19.0 19.2 reference symbol dimension in millimeters min nom max 0.22 0.27 0.34 p-sdip20-6.3x19-1.78 1.0g mass[typ.] 20p4b prdp0020ba-a renesas code jeita package code previous code b p 0.38 0.48 0.58 e 1 7.62 7.32 7.92 a 2 3.3 0 *3 *2 *1 seating plane 20 11 10 1 c e 1 e a l a 2 a 1 b p b 3 e d include trim offset. dimension "*3" does not note) do not include mold flash. dimensions "*1" and "*2" 1. 2. 2. 1. dimensions "*1" and "*2" do not include mold flash. note) dimension "*3" does not include trim offset. 1.42 1.12 b p a 1 h e y 0.1 e 1.27 c 0 8 l 0.4 0.6 0.8 0 0.1 0.2 a 2.1 7.5 7.8 8.1 a 2 1.8 e 5.2 5.3 5.4 d 12.5 12.6 12.7 reference symbol dimension in millimeters min nom max 0.35 0.4 0.5 0.18 0.2 0.25 p-sop20-5.3x12.6-1.27 0.3g mass[typ.] 20p2n-a prsp0020da-a renesas code jeita package code previous code detail f l a 2 a 1 y index mark *1 *2 *3 1 10 11 20 f h e e e b p a c d
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas product s for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of t he use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application ci rcuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attentio n to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the t otal system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding th e suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this do cument or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not desi gned, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of h uman injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion co ntrol, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a r enesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to us e renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, dir ectors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas sha ll have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristic s such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the poss ibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software includin g but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, sinc e the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from r enesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renes as semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7858/7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2377-3473 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 3518-3399 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, m alaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2008. renesas technology corp., all rights reserved. printed in japan. colophon .7.2

▲Up To Search▲

Price & Availability of M62301FP

	To Download M62301FP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .