a c print type tolerances unless noted .xx=.010 .xxx=.005 frac.=1/64 ang.=1 - ------ -- see eng for rev a to d e 09/12/2011 sk see co 200707 for changes f 09/27/2011 sk see co 200714 for changes g 10/03/2011 sk see co 200718 for changes h 07/31/2012 dz corrected ul 94 rating to hb, see ecn # 1370 "t" holding dia. "w" shc-16gf* notes: 1. material: nylon 6/6 ul94 hb (rms-73). glass filled nylon (rms-35), available by special order. 2. color: white black available by special order. * only available in glass filled nylon material. part no. holding diamerer range thickness "t" width "w" shc-16gf* 1/4 - 5/16 [6.4-7.9] .040 [1] .13 [3.3] shc-23 23/64 - 25/64 [9.1-9.9] .07 [1.8] .22 [5.6] shc-26 25/64 - 15/32 [9.9-11.9] shc-30 15/32 - 17/32 [11.9-13.5] shc-32 17/32 - 19/32 [13.5-15.1] shc-38 19/32 - 21/32 [15.1-16.7] shc-44 11/16 - 13/16 [17.5-20.6] SHC-50 3/4 - 7/8 [19.1-22.2] shc-56 7/8 - 1 [22.2-25.4] shc-62 61/64 - 1 3/32 [24.2-27.8] .31 [7.9] shc-68 1 1/32 - 1 3/16 [26.2-30.2] shc-80 1 1/4 - 1 7/16 [31.8-36.5] shc-92 1 13/32 - 1 5/8 [35.7-41.3] .36 [9.1] shc-134 2 1/8 - 2 3/8 [54-60.3] .40 [10.2] part # chkd: app: dwn: dt: sheet size: sheet: file #: 1 of 1 a 09/09/11 mjb shc sk sk final units: in [mm] richco, inc. www.richco-inc.com re: richco, inc. -- created using solidworks title: snap-it hose clamps description engr. date rev. see table
|