S1C60N16 4-bit single chip microcomputer s1c6200b core cpu low voltage and low power built-in lcd driver built-in svd (supply voltage detector) ? description the S1C60N16 series is a single-chip microcomputer made up of the 4-bit core cpu s1c6200c, rom (4,096 words 12 bits), ram (256 words 4 bits), lcd driv er, analog comparator, event counter, watchdog timer, and two types of time base counter. becaus e of its low-voltage operation and low pow er consumption, this series is ideal for a wide range of battery-driven applications. it is especially suitable for various controller applications such as a clock, game and pager. ? configuration the S1C60N16 series is configured as follows , depending on supply voltage and oscillation circuits. model S1C60N16 s1c60l16 s1c60a16 supply voltage 3.0v 1.5v 3.0v oscillation circuit osc1 only (single clock) osc1 and osc3 (twin clock) lcd power supply supports 3.0 v lcd panels ? features the main features of the s1 c60n16/l16/a16 are listed below. model S1C60N16 s1c60l16 s1c60a16 osc1 oscillation circuit crystal oscillation circuit 32.768 khz (typ.) osc3 oscillation circuit ? cr or ceramic oscillation circuit (selected by mask option) 1 mhz (typ.) instruction set 108 types 153 sec, 214 sec, 366 sec (clk=32.768khz) instruction execution time (differs depending on instruction) (clk: cpu operation frequency) ? 5 sec, 7 sec, 12 sec (clk=1mhz) rom capacity 4,096 words 12 bits ram capacity 256 words 4 bits input ports 5 bits (pull-down resistor can be added by mask option) output ports 8 bits (bz, bz, fout and siof outputs are available by mask option) i/o ports 8 bits (pull-down resistor is added during input data read-out) (3 bits can be configured as serial i/o ports by mask option) serial interface 1 port (8-bit clock synchronous system) lcd driver 38 segments 4, 3, or 2 commons (selected by mask option) v-3 v 1/4, 1/3 or 1/2 duty (voltage r egulator and booster circuits built-in) time base counter two types (timer and stopwatch) watchdog timer built-in (can be disabled by mask option) event counter two 8-bit inputs (d ial input evaluation or independent) sound generator programmable in 8 sounds (8 frequencies) digital envelope built-in (can be disabled by mask option) analog comparator inverted input 1, non-inverted input 1 supply voltage detection ( svd) 2.2v 1.2v 2.2v heavy load protection functi on not implemented implemented external interrupt input interrupt: 2 systems internal interrupt time base counter interrupt: 2 systems serial interface interrupt: 1 system supply voltage 3.0v(2.2~3.6v) 1.5v(1.2~1.8v) 3.0v(2.2~3.6v) current clk=32.768khz 0.7 a 0.7 a 1.5 a
S1C60N16 (when halted) (normal operation mode) clk=32.768khz (when executed) 1.4 a 1.4 a 2.4 a (normal operation mode) clk=1mhz (ceramic) (when executed) ? ? 50 a (normal operation mode) consumption (typ. value) clk=1mhz(cr) (when executed) ? ? 85 a (normal operation mode) form when shipped qfp14-80pin or chip 2 seiko epson corporation
S1C60N16 ? block diagram rom 4,096 words x 12 bits system reset control core cpu s1c6300c osc ram 256 words x 4 bits lcd driver 38 seg x 4 com power controller svd event counter comparator interrupt generator input port i/o port serial i/f output port sound generator timer stopwatch reset k00-k03 k10 test p00-p03 p10-p13 r00-r03 r10-r13 ampm ampp v ss cb ca v c3 v c2 v c1 v d1 v d0 seg0-37 com0-3 osc4 osc3 osc2 osc1 rom 4,096 words x 12 bits system reset control core cpu s1c6300c osc ram 256 words x 4 bits lcd driver 38 seg x 4 com power controller svd event counter comparator interrupt generator input port i/o port serial i/f output port sound generator timer stopwatch reset k00-k03 k10 test p00-p03 p10-p13 r00-r03 r10-r13 ampm ampp v ss cb ca v c3 v c2 v c1 v d1 v d0 seg0-37 com0-3 osc4 osc3 osc2 osc1 microdevices operations division seiko epson corporation notice: no part of this material may be reproduced or duplicated in any fo rm or by any means without the written permission of seiko ep son. seiko epson reserves the right to make c hanges to this material without notice. se iko epson does not assume any liability of a ny kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, furt her, there is no representation that this material is app licable to products requiring high level reliab ility, such as, medical products. moreo ver, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that any thing made in accordance with this material will be free from any patent or copy right infringement of a third party. this material or portions thereof may contain technology or the subject relati ng to strategic products under the control of the foreign exchange and foreign trade la w of japan and may require an export license from the ministry of economy, trade and industry or other approval from another government ag ency. all brands or product names mentioned herein are trademarks and/ or registered trademarks of t heir respective companies. ? seiko epson corporation 2012, all rights reserved epson semiconductor website http://www.epson.jp/device/semicon_e/ device sales & marketing department 421-8 hino, hino-shi, tokyo 191-8501, japan phone: +81-42-587-5814 fax: +81-42-587-5117 document code: 4112298600 first issue february, 2012 3
|
