View 2ASA_7513810.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 electronics pliers, cutters and tweezers cooper hand tools
page tweezers 4-16 pointed tips 5-10 flat round tips 10-11 tweezers with ergonomic handles 11 smd tweezers 12-13 special gripping tweezer 13 wafer tweezers 14 cutting tweezers 15 stripping tweezers 15 extraction tweezers/connector tools 16 cutters 17-36 side cutters 21-27 side cutters with ergonomic handles 27-28 tip cutters 29-33 tip cutters with ergonomic handles 33 pneumatic side cutters and tip cutters 34-35 distance cutters 36 pliers 37-39 erop cutters and pliers 40-42 stripping tools 42-43 pre-forming tools 44-48 for passive components 44-45 for active components 46-48 ic and smd tools 48-49 inserting and extracting 48 straightening 48 cutting + trimming 49 fibre optic tools 50 kits 51 vacuum manipulator 52-55 index 58-59 content ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... .............. ....................................................................................... ..............
3 erem tools - precision made in switzerland p recision is sought by many but achieved by few. the quality and perfor- mance of erem hand tools is the result of more than 25 years of research and manufacturing expertise. erem is constantly innovating and developing new tools for use in areas as diverse as electronics, aviation, biology, medical (cardio-vascular, cannulae applications), watch and clock industry, telecoms. although your initial investment in erem tools may be higher than some other tools, the final cost based on medium to long term use will be lower due to the economy resulting from the quality of the tools and in the case of the cutters, the free of charge resharpening. the inhe- rent precision of the tools will be reflected in the quality of your products.
4 erem tweezers e rem tweeezers are high precision tools of constant high quality. precise finished and symmetrical tips together with easy handling and perfect balance makes them outstanding tools. the range of erem tweezers covers a wide diversity of applications. it is produced in many shapes and can be manufactured from different materials. the most popular models are avai- lable in a lower cost economy (sl) range. in all models, the type number of the tweezers is stamped, not printed. the material erem offers a wide variety of materials, carbon steel, stainless steel, erem special stainless steel, nickel plated, brass or titanium. the most common ones are explained below: carbon steel carbon steel tweezers have hard tips but the rust resistance is low and they are magnetic. carbon steel tweezers have no suffix. stainless steel tweezers from stainless steel have strong tips and are rust resistant but are not as hard and longlasting as carbon steel tweezers. stainless steel tweezers have the suffix ?? erem special stainless steel this grade of steel is a non magnetic, rust resistant, anti acid alloy. it is temperature resistant up to 300?. tweezers from special stainless steel have the suffix ?a coating the pyroplast coating is an exclusive by erem. the advantages are: - heat resistance up to 500? (932?), almost twice as much as ptfe, cralon, etc. - no capillary effect on tips while soldering (non-stick property) - no contamination caused by positive or negative charge - hydrophobic - radiation resistant - thickness 60-80 the suffix is ?yr? note: the pyroplast coating is not available for all erem tweezers. it is made to order and needs a minimum order quantity. please ask for further information. ergonomic developed by erem, tweezers with ergonomically shaped handles to alleviate the problem of repetitive strain injuries (rsi) and reduce operator fatigue. the range has been selected to include the most popular tip shapes (see page 11). the main features are: - ergonomic design for operator comfort and ease of control - two colour, thermally insulated soft grip handles moulded from a synthetic material - esd safe - the grips absorb heat for additional user protection - manufactured from non magnetic, acid resistant, stainless steel alloy - supplied in a rigid, transparent plastic box for protection and storage the prefix for ergonomic tweezers is ?? suffix none carbon steel e (prefix) ergonomic handles m brass, soft material to avoid damage, no sparks n nickel-silver alloy pyr pyroplast coating ru anti adhesive coating s stainless steel sa, ca special stainless steel, non-magnetic, acid resistant sl economy version ta titanium, non-magnetic, lightweight, high temperature resistant z nickel plated
stainless steel, anti-glare finish precision tweezers with long tips for delicate circuit board assembly. special stainless steel, anti-glare finish, non-magnetic precision tweezers for delicate circuit board assembly. special stainless steel, anti-glare finish, non-magnetic same as 3csa but economy model. titanium, non-magnetic same as 3csa but titanium for heat resistance and light weight. 110 mm 110 mm 110 mm 110 mm 110 mm 11 g 11 g 11 g 8 g 11 g 3cs 3csa 3csasl 3cta 53csa special stainless steel, anti-glare finish, non-magnetic precision tweezers with crush-proof design for handling of delicate parts. 108 mm 108 mm 16 g 12 g acsa 20as stainless steel, anti-glare finish precision tweezers with serrated grips and inside serrated tips for anti-slip handling. guide pin to avoid tip overlapping. for bending and handling. special stainless steel, anti-glare finish, non-magnetic precision tweezers with serrated grips for anti-slip handling. for bending and handling. 5 pointed tips straight precision tweezers length 80 mm length 108 mm pointed tips straight main applications: for conventional and preci- sion handling of small parts like tissue, components, wires. for tasks in micro electronics industry, medici- ne, laboratories and other applications where high precision is required. model length weight description model length weight description length 110 mm 80 mm 6 g m5s stainless steel, anti-glare finish micro tweezers, very small, very fine tips, e.g. for work under microscope model length weight description
125 mm 16 g aas stainless steel, anti-glare finish precision tweezers with strong but fine tips. for universal use. 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 120 mm 14 g 14 g 14 g 14 g 20 g 20 g 18 g 20 g 20 g 17 g 17 g 16 g 3sa 3sasl 1sa 1sasl oosa oosasl oocsa oobsa oodsa 64sa 11n aaz special stainless steel, anti-glare finish, non-magnetic precision tweezers for micro electronics. precision work. special stainless steel, anti-glare finish, non-magnetic same as 3sa but economy model. special stainless steel, anti-glare finish, non-magnetic precision tweezers for general use. special stainless steel, anti-glare finish, non-magnetic same as 1sa but economy model. special stainless steel, anti-glare finish, non-magnetic precision tweezers for general purpose e.g. electronic assembly, very sturdy. special stainless steel, anti-glare finish, non-magnetic same as 00sa but economy model. special stainless steel, anti-glare finish, non-magnetic same as 00sa but smaller version. special stainless steel, anti-glare finish, non-magnetic same as 00sa but with serrated grips. special stainless steel, anti-glare finish, non-magnetic same as 00sa but with serrated grips and inside serrated tips. special stainless steel, anti-glare finish, non-magnetic precision tweezers with serrated grips. nickel-silver alloy, anti-glare finish, non-magnetic precision tweezers nickel-silver alloy, perfect non-magnetic. nickel plated precision tweezers nickel plated, for electronics assembly. 6 pointed tips straight length 120 mm length 125 mm precision tweezers model length weight description model length weight description 125 mm 16 g aassl stainless steel, anti-glare finish same as aas but economy model.
21sa 160 mm 23 g special stainless steel, anti-glare finish, non-magnetic precision tweezers, long version, with serrated grips and inside ser- rated tips, strong. 150 mm 26 g 29sa special stainless steel, anti-glare finish, non-magnetic, reverse action precision tweezers with fibre-grip handles for heat protection. reverse action for permanent holding parts. stainless steel, anti-glare finish precision tweezers, long version, very strong. special stainless steel, anti-glare finish, non-magnetic precision tweezers with narrow grips and low tension. extra long for use near heat, die attachment. special stainless steel, anti-glare finish, non-magnetic same as sssa but economy model. 140 mm 140 mm 140 mm 30 g 11 g 11 g rrs sssa sssasl 130 mm 20 g 249sa 130 mm 24 g 249cer 125 mm 125 mm 125 mm 16 g 16 g 17 g aasa aasasl am 7 pointed tips straight precision tweezers model length weight description length 130 mm length 140 mm model length weight description model length weight description length 150 mm model length weight description length 160 mm model length weight description special stainless steel, anti-glare finish, non-magnetic precision tweezers with strong but fine tips. for universal use. special stainless steel, anti-glare finish, non-magnetic same as aasa but economy model. brass, polished precision tweezers brass. soft metal protects sensitive parts against damage. no sparks. special stainless steel / pps, anti-glare finish, non- magnetic esd safe, suitable for fibre optics precision tweezers with serrated grips and synthetic tips (pps). heat resistant up to 250? (480?). resistant to acids and solder. waterproof, esd safe. does not damage fibre optic cores. special stainless steel / ceramic anti-glare finish, non- magnetic same as 249sa but with ceramic tips for heat resistance up to 900? (1500?).
special stainless steel, anti-glare finish, non-magnetic precision tweezers with very fine tips e.g. for handling fine wires. special stainless steel, anti-glare finish, non-magnetic same as 5sa but economy model special stainless steel, anti-glare finish, non-magnetic precision tweezers with medium tips. special stainless steel, anti-glare finish, non-magnetic same as 2sa but economy model. 115 mm 12 g 5mbs 115 mm 115 mm 115 mm 115 mm 115 mm 12 g 12 g 12 g 16 g 16 g 5fsa 5sa 5sasl 2sa 2sasl stainless steel, anti-glare finish precision tweezers with extremely fine tips (~ 0,03 x 0,07 mm) for use in dissection procedures and handling of very small samples e.g. under microscope. only for use with soft materials. special stainless steel, anti-glare finish, non-magnetic precision tweezers with extremely fine tips (~ 0,05 x 0,1 mm) for use in dissection procedures and handling of very small samples e.g. under microscope. only for use with soft materials. 90 mm 9 g m4as stainless steel, anti-glare finish micro tweezers with very small, very fine tips, e.g. for working under microscope or handling tiny parts in hf assembly. strong tips due to hardened stainless steel. 110 mm 110 mm 13 g 13 g 4sa 4sasl special stainless steel, anti-glare finish, non-magnetic precision tweezers with very fine points.. special stainless steel, anti-glare finish, non-magnetic same as 4sa but economy model. 8 pointed tips straight relieved pointed tips straight relieved main application: for better product visibility e.g. under microscope or working in confined areas, for handling tiny components. length 90 mm precision tweezers model length weight description length 110 mm model length weight description length 115 mm model length weight description
< ) 30? special stainless steel, anti-glare finish, non-magnetic precision tweezers curved, relieved. < ) 30? special stainless steel, anti-glare finish, non-magnetic precision tweezers curved, relieved. < ) 30? special stainless steel, anti-glare finish, non-magnetic precision tweezers curved, relieved. very fine tips. < ) 30? special stainless steel, anti-glare finish, non-magnetic same as 51sa but economy model. < ) 15? special stainless steel, anti-glare finish, non-magnetic precision tweezers oblique, relieved. fine tips. < ) 15? special stainless steel, anti-glare finish, non-magnetic same as 5 asa but economy model. 115 mm 115 mm 115 mm 115 mm 115 mm 115 mm 12 g 12 g 12 g 12 g 12 g 12 g 5csa 5bsa 51sa 51sasl 5asa 5asasl 3cbs 110 mm 11 g < ) 40? stainless steel, anti-glare finish precision tweezers bent for delicate circuit board assembly. 258sa 120 mm 15 g 9 pointed tips straight relieved precision tweezers length 120 mm length 110 mm model length weight description pointed tips bent model length weight description length 115 mm model length weight description pointed tips bent main application: for better product visibility and handling e.g. working in confined areas and under microscope. special stainless steel/pps, anti-glare finish, non- magnetic, esd safe precision tweezers with serrated grips and synthetic tips (pps). heat resistant up to 250? (480?). resistant to acids and solder. waterproof, esd safe.
120 mm 15 g 2ASA special stainless steel, anti-glare finish, non-magnetic precision tweezers with medium tips for gripping. 140 mm 11 g 65asa 10 pointed tips bent precision tweezers length 120 mm model length weight description 120 mm 120 mm 15 g 15 g 7sa 7sasl special stainless steel, anti-glare finish, non-magnetic precision tweezers curved, relieved. for easy handling in confined areas. special stainless steel, anti-glare finish, non-magnetic same as 7sa but economy model. length 150 mm model length weight description 150 mm 150 mm 22 g 26 g 24sa 30sa < ) 40? special stainless steel, anti-glare finish, non-magnetic precision tweezers bent. serrated grips and inside serrated tips. alignment pin. useful for all soldering jobs and assembly. length 140 mm model length weight description length 120 mm model length weight description flat round tips straight flat round tips straight main application: for conventional holding and gripping applications. < ) 50? special stainless steel, anti-glare finish, non-magnetic, reverse action precision tweezers bent. with fibre-grip handles for heat protec- tion. reverse action for permanent holding parts. useful e.g. for soldering jobs. < ) 50? special stainless steel, anti-glare finish, non-magnetic precision tweezers bent. very fine points. for handling extra fine components.
120 mm 120 mm 120 mm 120 mm 120 mm 25 g 30 g 28 g 28 g 25 g e5sa e3csa e00sa e7sa e2ASA special stainless steel, ergonomic handles, non-magnetic, esd-safe ergonomic precision tweezers straight, very fine tips , e.g. for han- dling fine wires. special stainless steel, ergonomic handles, non-magnetic, esd-safe ergonomic precision tweezers straight, long fine tips, for delicate circuit board assembly. special stainless steel, ergonomic handles, non-magnetic, esd-safe ergonomic precision tweezers straight, fine tips, for general use. very sturdy. special stainless steel, ergonomic handles, non-magnetic, esd-safe ergonomic precision tweezers curved, fine tips, for easy manipula- tion in confined areas. special stainless steel, ergonomic handles, non-magnetic, esd-safe ergonomic precision tweezers straight, flat round tips, for gripping. 11 flat round tips straight precision tweezers model length weight description 120 mm 120 mm 120 mm 120 mm 120 mm 15 g 16 g 16 g 15 g 15 g 2ASAsl 2ASAsl t 2ASAru 25sa 52ASA special stainless steel, anti-glare finish, non-magnetic same as 2ASA but economy model. special stainless steel/ptfe, coated, anti-glare finish, non-magnetic same as 2ASA but ptfe, coated tips for handling delicate parts. special stainless steel/coated, anti-glare finish, non-magnetic same as 2ASA but coated tips for handling adhesive parts, gaskets, kapton ribbons, labels with negligible capillary effect. special stainless steel, anti-glare finish, non-magnetic precision tweezers with flat round tips. for gripping. special stainless steel, anti-glare finish, non-magnetic precision tweezers with crush-proof design for handling of delicate parts. precision tweezers with ergomomic handles* model length weight description main applications: thermally insulated soft grips, esd safe, ergonomi- cally shaped to reduce ope- rators hand fatigue. note: colour coatings subject to variations without prior notice. * ergonomic features see page 4.
45? special stainless steel, anti-glare finish, non-magnetic smd tweezers with angled head and blunt edges to avoid board damage. for handling of small components. 115 mm 15 g 102aca 115 mm 115 mm 14 g 15 g 102acax 103aca special stainless steel, anti-glare finish, non-magnetic smd tweezers with angled head and blunt edges to avoid board damage. for handling small components, mounting on smd boards, hybrids ics, watch hands, etc. special stainless steel, anti-glare finish, non-magnetic, reverse action same as 102aca but reverse action. 110 mm 110 mm 15 g 15 g 39sa 40 sa 0,3 mm, special stainless steel, anti-glare finish, non-magnetic straight, serrated grips. for gripping wires and small cylindrical parts. 0,4 mm, special stainless steel, anti-glare finish, non-magnetic straight, serrated grips. for gripping wires and small cylindrical parts. 120 mm 13 g 13 g 150samf 1,2 ?2,5 mm, special stainless steel, anti-glare finish, non-magnetic smd tweezers straight, serrated grips. for gripping small cylindrical parts, mini melfs. very narrow tips. 1,5 ?3 mm, special stainless steel, anti-glare finish, non-magnetic smd tweezers straight, serrated grips. for gripping small cylindrical parts. 120 mm 150sad 12 smd tweezers angled head main application: for handling chips or minia- ture smd components. for mounting on smd boards or ceramic substra- tes. smd tweezers model length weight description rounded head model length weight description
120 mm 17 g 940as stainless steel, anti-glare finish gripping tweezers with locking clip. for various applications. resists a tensile force of ~ 5 kg. 115 mm 115 mm 115 mm 115 mm 17 g 17 g 17 g 13 g 32bsa 32bsa20 32bsa25 150samb 45? 5 mm, special stainless steel, anti-glare finish, non-magnetic smd tweezers bent. for small cylindrical components or insulated fibres. 45? 2 mm, special stainless steel, anti-glare finish, non-magnetic same as 32bsa but 2 mm. 45? 2,5 mm, special stainless steel, anti-glare finish, non-magnetic same as 32bsa but 2,5 mm. 40? 1,2 - 2,5 mm, special stainless steel, anti-glare finish, non-magnetic smd tweezers bent, serrated grips. for gripping small cylindrical parts. 13 g 3 ?6 mm, special stainless steel, anti-glare finish, non-magnetic smd tweezers straight, serrated grips. for gripping small cylindrical parts. 120 mm 13 g 150sa 1,5 ?3 mm, special stainless steel, anti-glare finish, non-magnetic smd tweezers straight, serrated grips. for gripping small cylindrical parts. 151sa 120 mm 13 rounded head smd tweezers model length weight description model length weight description model length weight description rounded head bent special gripping tweezers
14 wafer tweezers wafer tweezers wafer tweezers main application: for handling wafers from 3?to 6? different coatings or sizes on request. 125 mm 12 mm 16 mm 7 mm 8 mm 20 mm 8 mm 30 mm 5 mm 30 mm 8 mm 30 mm 8 mm 30 mm 8,5 mm 19,5 mm 8 mm 15 g 91sa 3? 4? special stainless steel, anti-glare finish, non-magnetic standard wafer tweezers to pick up 3 or 4 silicon wafers. serrated grips. 120 mm 20 g 140sa 4 - 5? special stainless steel/polyester, anti-glare finish, non-magnetic wafer tweezers with delrin tips. available with adjustable opening screw. for 4 to 5 wafers. serrated grips. temperature resistance 170?. 150 mm 30 g 141sap 5? 6? special stainless steel/ ptfe, , anti-glare finish, non-magnetic wafer tweezers with polyester tips. the perfect wafer tweezers. will not damage si, gaas or ti wafers. serrated grips. 150 mm 30 g 141saph 130 mm 130 mm 130 mm 130 mm 22 g 23 g 23 g 24 g 500asa 600asa 608asa 600jsa 4- 5, special stainless steel, anti-glare finish, non-magnetic wafer tweezers with fingers to reduce the risk of damage. for 4 and 5 wafers. serrated grips. 6, special stainless steel, anti-glare finish, non-magnetic wafer tweezers with fingers to reduce the risk of damage. for 6 wafers. serrated grips. 6, special stainless steel, anti-glare finish, non-magnetic same as 600asa but with 30 mm width. 4- 6, special stainless steel, anti-glare finish, non-magnetic wafer tweezers with free-floating ptfe, paddle for self adjust- ment on 4- 6 wafers. serrated grips. 5- 6, special stainless steel/halar, anti-glare finish, non-magnetic same as 141sap but with halar coating and plastic tips without pigmentation. halar is acids resistant. model length a b weight description
120 mm 22 g 29y 120 mm 28 g 29w30 stainless steel, anti-glare finish miniature stripping tweezers. serrated grips. will strip tiny wires between awg 42 and 32 (0,06 to 0,20 mm). wire samples required. s tainless steel/fibre handles, anti-glare finish, reverse action stripping tweezers with fibre-grip handles. for standard or ptfe, wires between awg 30 and 28 (0,25 mm ?0,3 mm). reverse action. anti-glare finish cutting tweezers with fine oblique head and induction hardened cutting blades for increasing life time. for soft wires up to 0,25 mm. anti-glare finish cutting tweezers with oblique head. induction hardened cutting blades improves cutting capability and life time. for soft wires up to 0,25 mm. 115 mm 115 mm 21 g 26 g 15ags 15agw 15 cutting, stripping tweezers model length weight description model length weight description cutting tweezers cutting tweezers main application: e.g. for cutting soft wires on micro electronics circuits, very precise. stripping tweezers stripping tweezers main application: for stripping small wires, standard or ptfe, insultati- ons, very precise.
16 extraction tweezers extraction tweezers main application: to extract connected wires from the rear of the connectors. 120 mm 1,75 mm 2,15 mm 1,9 mm 2,15 mm 8 mm 8 mm 120 mm 20 g 20 g 024c 028 stainless steel extraction tweezers for sub-d types. for itt-canon / trw cet 20d, honda connectors, siemens, philips, souriau-framatome, etc. stainless steel same as 024c but with thinner nozzle wall for wires with larger insulations. extraction tweezers model length a b c weight description = outside = inside
17 cutters and pliers cutters and pliers e rem cutters and pliers are unique in the degree of qua- lity, precision, reliability, ergonomy and long life they offer when compared to other professional tools, for the following reasons: erem cutters and pliers are not forged. they are manufactured from billets of high grade tool steel, which uses a swiss developed lamination technique. it employs a multiple extrusion process to super compact the steel imparting addi- tional strength and toughness to the tools. this results in reliable and long lasting tools. the surfaces between the two halves of the joint are machine finished and in conjunction with the interlocking precision screw that is used to join both halves together ensure wobble free operation and eliminates blade overlap which could cause mechanical shock and damage components. the return springs are mounted internally in the head of the tools and are gua- ranteed for 1 million operations. they operate with a constant resistance over the movement of handles to reduce operator fatigue making them superior to leaf or coil springs. the steel the joints the springs erem maximum opening stop, limits the handle spread by preventing the tips of the blades from opening more than 5mm. to promote operator comfort and ergonomy. emos erem cutters and pliers
cutters and pliers cutters and pliers 18 erem is able to offer tools for special applications without minimum order quantity. dimensioned drawings /and or samples of your application will be required. 1. spare parts erem pliers and cutters and their spare parts are guaranteed against manufacturing defects. the following parts will be supplied free of charge should a defect be found - foam grips - springs - opening stops please contact your local cooper hand tools office for advice on procedure. 2. resharpening erem cutters can be returned to erem switzerland for free of charge resharpening. it is possible to resharpen tools up to three times depending on their condition. tools will be returned to you fitted with new handles depending on their shape. you will be invoiced for transport costs only. customer service specials ergonomic handles median nerve carpal tunnel carpal bones muscles at base of thumb median nerve tendons erem cutters and pliers with ergonomic handles the work related upper limb disorder ( wruld ) is a muscular skeletal problem related to the arm. wrulds can be caused by positional fatigue or nerve damage caused e.g. by repetitve use of non ergonomic hand tools, the socalled repetitive strain injuries (rsi). the ability to grip and hold objects can be impaired. repetitive movements can cause compression of the median nerve and produce sensations of pins and needles. wrulds is a direct result of companies manufacturing processes and working practices and will as result detrimental to the quality of a companies products. therefore a reduc- tion of the factors which cause wrulds will improve working practice and product quali- ty. in fact it is arguable that without quality working practice there can be no quality product. to alleviate the problem of rsi and erem have designed a range of tools with ergonomic handles.the compound curves of the handles of the erem ergonomic cutters and pliers allow the pressure applied to the handles when cutting or gripping to be evenly spread over the palm of the hand. the thumb and fingers are self- positioned by the handles, making the tool comfortable for the operator to use and reducing the incidence of wrulds.the comfortable foam grips are esd safe and easily interchangeable. the following tools are available with ergonomic handles: - side cutters see page 27 ?28 - tip cutters see page 33 - pliers see page 39
19 cutters and pliers cutters and pliers the best way to compare the real costs between different hand tools is to consider the number of cuts - besides the work itself and the performance.the parameters below indicate how erem tools - representing a higher initial investment - become even more economical than lower quality cutters on a medium or long-term basis. cost per cut comparison emi/rf erem-cutters + pliers sources:dod/cecc 10 10 0 10 5 10 12 10 20 ? /cm 2 antistatic conductive insulating static dissip. esd safety the foam cushion grips are static dissipative and are fitted a standard to all models. 25 50 75 100 10 20 30 40 50 60 70 80 90 100 125 150 175 200 225 250 275 300 325 a b c 1 2 a = low-end tools b = medium quality c = erem 1,2 = average stages of erem cutters needing resharping. price no. of cuts/1.000
503e x 504ae x 555e x 570e x 572e x 573e x 575e x 582e x 582ew x 670e x 1503n x 2282e x 20 cutting capabilities cutting capabilities 147a x 511e x 512e x 512n x 521e x 522e x 522n x 532n x 576ez x 577e x 592e x 595e x 597e x 599e x 611e x 612e x 612n x 622n x 622na x 622nb x 632n x 676e x 677e x 710e x 776e x 792e x 812n x 822n x 884e x 886e x 896e x 1512n x 1522n x 1522na x 1522nb x 2212e x 2222e x 2222ea x 2222eb x 2232e x 0,1-0,6 0,6-1,2 >1,2 sf f ff max. cu (copper) mm cut* side cutters* model 0,1-0,6 0,6-1,2 >1,2 sf f max. cu (copper) mm cut* tip cutters* model = semi flush = flush = erem super full flush description see page 21 *note: there is no max. cu indication for t ungsten carbide cutters. please ask for the according cutting capabilities.
21 side cutters side cutters side cutters erem offers a wide range of precision side cutters. to establish which cutter is correct for your application follow the steps below oval head the most common head shape. for standard cutting applications where access is not the problem. tapered head for cutting tasks where easier access is required. the tapered head shape allows better tip access than the oval head but without much reducing the cutting capability. relieved head for cutting in confined areas. this is the smallest head shape available. one side is cut away for access even in confined areas. due to the cut away the cutting capability is reduced. flush tip cutting. head form cut size 110 mm small short head for increased cutting resistance. for almost all cutting applications. 115 mm longer and finer head. for cutting applications where easy access is more important than a high cutting capacity. 120 mm strong version. for all cutting applications where high cutting capacity is required. semi flush these blades allow a very high resistance. will cut from tip to heel, malleable wires like copper as well as hard wires. leaves a pinch at the end of the wire. for all applications where the cutting type is not so important. flush allows a flat cut with the same cutting capacities. the edge of the wire is cut of f flat. thanks to faster penetration into the component the operators effort is substantially redu- ced. no solder spikes after using wave soldering process. super full flush an erem exclusivity . this absolute full flush cut leaves a perfect flat surface on cut leads it prevents any pinching of leads. flat, clean cut. no cutting rework after soldering. soft wires only . 1 2 1. erem cut 2. others cutting safety device, holds wire scraps. can be adapted on all side cutters series 500, 600 and 2200. add ??when ordering, e.g. 595ew safety lead device
115 mm 10 mm 10,5 mm 1,6 mm 67 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for universal use. medium size. economical line. 512n 6,5 mm 110 mm 9 mm 9 mm 1,25 mm 48 g semi flush cut, high grade tool steel, burnished, esd safe, resharpenable miniature side cutter. economical line. small head. 612n 6 mm 110 mm 9 mm 9 mm 1,5 mm 48 g semi flush cut, high grade tool steel, burnished, esd safe, resharpenable miniature side cutter. small head. 611e 6 mm 110 mm 10,5 mm 9 mm 1,5 mm 48 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. standard head width. 612e 6 mm 110 mm 9 mm 9 mm 1,25 mm 48 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. economical line. small head. 622n 6 mm 110 mm 9 mm 9 mm 1,25 mm 48 g super full flush cut, high grade tool steel, anti- glare finish, esd safe, resharpenable miniature side cutter. economical line. small head. perfect full flush cut. soft wires only. 632n 6 mm 110 mm 8,8 mm 9 mm 1,0 mm 48 g super full flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. standard head width. perfect full flush cut. soft wires only. 710e 6 mm oval head side cutters description 22 length 110 mm length 115 mm oval head main application: standard cutting applications. model l a b c max. cu weight model l a b c max. cu weight description description
23 oval head side cutters model l a b c max. cu weight description 115 mm 10 mm 10,5 mm 1,2 mm 67 g flush cut, high grade tool steel, polished head, esd safe, resharpenable side cutter for universal use. medium size. 521e 522n 6,5 mm 115 mm 10 mm 10,5 mm 1,6 mm 67 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for universal use. medium size. economical line. 6,5 mm 115 mm 12 mm 10,5 mm 1,2 mm 67 g flush cut, high grade tool steel, polished head, esd safe, resharpenable side cutter for universal use. 6,5 mm 115 mm 12 mm 10,5 mm 1,6 mm ask for cutting capability* 67 g flush cut, high grade tool steel, anti-glare finish, esd safe side cutter with robust head. 6,5 mm 522e 599e 115 mm 10 mm 10,5 mm 1,6 mm 67 g semi flush cut, high grade tool steel, burnished, esd safe, resharpenable side cutter for universal use. medium size. 511e 6,5 mm 115 mm 12 mm 10,5 mm 1,6 mm 67 g semi flush cut, high grade tool steel, burnished, esd safe, resharpenable side cutter for universal use. medium size. for tough cutting applications. 512e 6,5 mm 115 mm 12 mm 10,5 mm 1,6 mm 67 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter with strong head. for soft and small hard wires. 597e 6,5 mm 115 mm 11,5 mm 10,5 mm ask for cutting capability* 67 g semi flush cut, tungsten carbide blades, anti-glare finish, esd safe side cutter with tungsten carbide blades for constant quality cuts. resistant to small stainless steel wires. 599t 6,5 mm 115 mm 11,5 mm 10,5 mm 67 g flush cut, tungsten carbide blades, anti-glare finish, esd safe side cutter with tungsten carbide blades for constant quality cuts. resistant to small stainless steel wires. 6,5 mm 599tf 115 mm 10 mm 10,5 mm 1,6 mm 67 g 6,5 mm 532n super full flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for universal use. medium size. economical line. perfect full flush cut. soft wires only. * please provide wire sample. 115 mm 15 mm 10,5 mm 67 g semi flush cut, tungsten carbide blades, anti-glare finish, esd safe side cutter with tungsten carbide blades. for cutting vectran braided wires, fibre optics, kevlar and small stainless steel braids. ask for special application. 599tfo 6,5 mm ask for cutting capability*
115 mm 12 mm 10,5 mm 67 g semi flush cut, tungsten carbide blades, anti-glare finish, esd safe side cutter with tungsten carbide blades for constant quality cuts. resistant to small stainless steel wires. ask for special application. 595t 6,5 mm ask for cutting capability* 110 mm 9 mm 9 mm 1,0 mm 48 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. small tapered head allows very good access. economical line. 622na 6 mm 110 mm 9 mm 9 mm 1,0 mm 48 g 677e 6 mm flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. small tapered head allows very good access. 120 mm 15 mm 13,5 mm 1,8 mm 85 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for large wires. economical line. 812n 7,5 mm 120 mm 15 mm 13,5 mm 1,8 mm 85 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for hard leads, kovar wires, connector pins, etc. 896e 7,5 mm 120 mm 15 mm 13,5 mm 1,8 mm 85 g 822n 7,5 mm flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for large wires. economical line. oval head side cutters 24 length 120 mm tapered head length 110 mm tapered head main application: cutting applications where easy access is required. length 115 mm model l a b c max. cu weight description model l a b c max. cu weight description model l a b c max. cu weight description * please provide wire sample.
115 mm 9 mm 10,5 mm 1,2 mm 67 g flush, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for universal use. medium size. 595e 6,5 mm 115 mm 9 mm 10,5 mm 1,2 mm 67 g flush, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for universal use. medium size. 577e 6,5 mm 110 mm 9 mm 9 mm 0,8 mm 48 g 662nb 6 mm flush, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. super fine relieved head allows very good access. economical line. 120 mm 15 mm 13,5 mm 1,8 mm 83 g 886e 7,5 mm flush, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for large wires. length 120 mm length 110 mm 25 tapered head relieved head side cutters length 115 mm relieved head main application: cutting applications in confined areas. model l a b c max. cu weight description model l a b c max. cu weight description model l a b c max. cu weight description 595tf ask for cutting capability* 115 mm 12 mm 10,5 mm 67 g flush cut, tungsten carbide blades, anti-glare finish, esd safe side cutter with tungsten carbide blades for constant quality cuts. resistant to small stainless steel wires. 6,5 mm * please provide wire sample.
120 mm 15 mm 13,5 mm 1,8 mm 81 g 884e 7,5 mm flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter for large wires. 115 mm 12 mm 10,5 mm 0,6 mm 67 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter with relieved head. medium size. for copper wires. 592e 6,5 mm 115 mm 13 mm 10,5 mm 0,6 mm 67 g 792e 6,5 mm 115 mm 9 mm 10,5 mm 1,2 mm 67 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter with fine relieved head. medium size. for fine wires. 576z 6,5 mm super full flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable side cutter with relieved head. medium size. for fine soft wires. relieved head side cutters 26 length 115 mm length 120 mm length 110 mm 110 mm 9 mm 9 mm 1,0 mm 48 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. super fine relieved head allows very good access. 676e 6 mm 115 mm 11 mm 10,5 mm 67 g flush cut, tungsten carbide blades, anti-glare finish, esd safe miniature side cutter. super fine relieved head allows very good access. tungsten carbide blades for constant quality cuts. resis- tant to small stainless steel wires. 576tx 6,5 mm 110 mm 9 mm 9 mm 1,0 mm 48 g super full flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature side cutter. super fine relieved head allows very good access. soft wires only. 776e 6 mm 110 mm 9 mm 9 mm ask for cutting capability* ask for cutting capability* 48 g 632ncf 6 mm super full flush cut, high grade tool steel, anti-glare finish, esd safe, soft materials only miniature side cutter. special fine, high precision cut exclusive- ly designed for soft materials like small silicone tubing in medical applications, precision connector sealing, miniature rubber gaskets or cutting of molded soft synthetic parts. super fine relieved head allows very good access. model l a b c max. cu weight description model l a b c max. cu weight description model l a b c max. cu weight description * please provide wire sample.
140 mm 10 mm 10 mm 1,25 mm 70 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable, ergonomic ergonomic side cutter for universal use. 2212e 5,8 mm 140 mm 10 mm 10 mm 1,25 mm 70 g flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable, ergonomic ergonomic side cutter for universal use. 2222e 5,8 mm 140 mm 10 mm 10 mm 1,25 mm 70 g 2232e 5,8 mm super full flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable, ergonomic ergonomic side cutter for fine and soft wires. 115 mm max.d 0,8 mm max.b 2,0 mm 79 g 884epcm 120 mm 12 mm 10,5 mm 2,0 mm - 100 g semi flush cut, high grade tool steel, anti-glare finish, esd safe, compound action compound action side cutter. easy cutting for hard wires. 3,5 times less force needed than with conventional cutters. high cut- ting capacity: hard wires up to 0,5 mm, soft wires up to 2,0 mm. flush cut on request. 147a 7,5 mm flush cut, high grade tool steel, anti-glare finish, esd safe, pcb separation side cutter for pcb separation only. new improved design for higher blade resistance. no breakage guarantee. 27 specials side cutters side cutters with ergonomic handles* *ergonomic features see page 18 oval head main applications: constant production cutting applications. model l a b c max. cu weight description model l a b c max. cu weight description specials
140 mm 10 mm 10 mm 0,8 mm 70 g 2222eb 5,8 mm flush, high grade tool steel, anti-glare finish, esd safe, resharpenable, ergonomic ergonomic side cutter for universal use. relieved head for working in confined areas. 140 mm 10 mm 10 mm 1,0 mm 70 g 2222ea 5,8 mm flush, high grade tool steel, anti-glare finish, esd safe, resharpenable, ergonomic ergonomic side cutter for universal use. tapered head for easier access. tapered head relieved head side cutters with ergonomic handles 28 tapered head relieved head model l a b c max. cu weight description model l a b c max. cu weight description
semi flush these blades allow a very high resistance. will cut malleable wires like copper as well as hard wires. leaves a pinch at the end of the wire. flush allow a flat cut with high cutting capacities. the edge of the wire is cut of f almost squarely. guaranteed precision even after constant usage. thanks to faster penetration into the component the operator s effort is substantially reduced. 29 tip cutters tip cutters tip cutters erem offers the largest variety of high precision tip cut- ters. all edges are finely radiused to avoid board damaging. to find the cutter for your demand just follow the steps angled for standard tip cutting applications. 110 mm small short head, for increased cutting resistance. for almost all cutting applications. 115 mm longer and finer head. for cutting applications where easy access is more impor- tant than a high cutting capacity. 120 mm strong version. for all cutting applications where high cutting capacity is required. angled narrow for applications in confined areas. longer but narrow head for better reach between parts and into areas with limited access. straight for vertical or horizontal tip cutting applications. head form cut size safety lead device 1 2 1. erem cut 2. others cutting safety device, holds wire scraps. can be adapted on 582e only. add ??when ordering, e.g. 582e w. erem blade protection all tip cutters have an ?nti-overbite system which prevents blades from overlapping.
110 mm 15 mm 10,5 mm 0,6 mm 67 g 575e 6,5 mm 10 mm < ) 45? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter. small size. for delicate work on hybrid circuits or micro modules. 110 mm 12 mm 10,5 mm ask for cutting capability* 67 g < ) 30? semi flush cut, tungsten carbide, anti-glare finish, esd safe tip cutter. standard size. tungsten carbide blades for con- stant quality cuts even on hard wires. 503et 6,5 mm 10 mm 110 mm 12 mm 10,5 mm 1,2 mm 67 g < ) 30? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter. standard size. for universal use. 503e 6,5 mm 10 mm 110 mm 13 mm 10,5 mm 1,2 mm 67 g < ) 30? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter. standard size. rounded head. for universal use. 504ae 6,5 mm 10 mm 110 mm 12 mm 10,5 mm ask for cutting capability* 67 g 503etf 6,5 mm 10 mm < ) 30? flush cut, tungsten carbide blades, anti-glare finish, esd safe tip cutter. standard size. tungsten carbide blades for con- stant quality cuts even on hard wires. angled head tip cutters 30 length 110 mm angled head small length 110 mm angled head small main applications: for applications in confined areas. angled head main application: for standard tip cutting applications. model l a b c d max. cu weight description model l a b c d max. cu weight description * please provide wire sample.
120 mm 21 mm 10,5 mm 1,2 mm 68 g < ) 40? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter. strong version. 555e 6 mm 6,5 mm 115 mm 18 mm 10,5 mm 0,6 mm 68 g < ) 40? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter. medium size. relieved jaws for easier access. 572e 6,5 mm 6,5 mm 115 mm 20 mm 10,5 mm 1,0 mm 68 g < ) 50? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter. cuts easily dil leads from the rear. cuts pins on dense pcb. ideal maintenance tool. 593ae 6,5 mm 4 mm 115 mm 19 mm 10,5 mm 1,0 mm 68 g < ) 45? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter medium size. a must when working on pcbs, cutting component leads. also ideal for rework. 582e 6,5 mm 7 mm 115 mm 19 mm 10,5 mm 1,0 mm 70 g 582ew 6,5 mm 7 mm < ) 45? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable, retention clip same as 582e but with retention clip, holds wire scraps after cutting. 31 angled head small tip cutters length 115 mm length 120 mm model l a b c d max. cu weight description model l a b c d max. cu weight description
120 mm 22 mm 9 mm 0,6 mm 67 g 570e 6,5 mm 4 mm flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter for horizontal or vertical tip cutting. for cutting at extreme tips. 110 mm 10,5mm 9 mm 0,6 mm 0,25 mm 48 g horizontal, flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature tip cutter. for cutting small wires in dense working areas. vertical smd cutter. 670e 6 mm 3 mm 110 mm 10 mm 9 mm 48 g 670ep 6 mm 2 mm vertical tip cutter, flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable miniature tip cutter. high precision smd lead cutting. micro-packages up to 0,25 fine pitches before desoldering. no breakage guarantee. for ?pitches under 0,5 mm use 670 epf straight tapered head tip cutters 32 length 110 mm length 120 mm straight tapered head main applications: for horizontal use and easier access. model l a b c d max. cu weight description model l a b c d max. cu weight description
140 mm 20 mm 10 mm 1,0 mm 70 g 2282e 5,8 mm 7 mm < ) 45? flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable, ergonomic ergonomic tip cutter. medium size. ideal for working on pcbs or cutting component leads. 120 mm 23 mm 9 mm 0,8 mm 67 g 573e 6,5 mm 3,5 mm vertical, flush cut, high grade tool steel, anti-glare finish, esd safe, resharpenable tip cutter for vertical tip cutting. for fine wires. 33 tip cutters straight head tip cutters with ergonomic handles* angled head small straight head main applications: for vertical use *ergonomic features see page 18 model l a b c d max. cu weight description model l a b c d max. cu weight description
28 mm 130 mm (w.o. head) 130 g 1500bsf manual air tool small precise pneumatic cutter housing. improved lifetime and reliability. easy interchangeable cutting heads. requires 4- 6 bar oil-free, clean compressed air. new economical version. pneumatic side cutters and tip cutters pneumatic cutters 34 housing cutting heads for 1500bsf side cutters oval head model l d weight description pneumatic side cutters and tip cutters the erem 1500bsf is a small lightweight air tool that can be fitted with a range of cutter heads making this tool extremely versatile. it is suitable for the cropping of conventional components, as well as small ductile or plastic parts. 10 mm 10,5 mm 1,6 mm semi flush cut, high grade tool steel, anti-glare finish, resharpenable side cutter for universal use. medium size. economical line. improved lifetime. 1512n 6,5 mm 35 g 10 mm 10,5 mm 1,6 mm 35 g 1522n 6,5 mm flush cut, high grade tool steel, anti-glare finish, resharpenable side cutter for universal use. medium size. economical line. improved lifetime. model a b c max. cu weight description
9 mm 10,5 mm 1,4 mm 35 g 1522na 6,5 mm flush cut, high grade tool steel, anti-glare finish, resharpenable side cutter for easier access. medium size. economical line. improved lifetime. 9 mm 10,5 mm 1,2 mm 32 g 1522nb 6,5 mm flush cut, high grade tool steel, anti-glare finish, resharpenable side cutter for confined areas. medium size. economical line. improved lifetime. 12 mm 10,5 mm 1,2 mm 38 g 1503e 6,5 mm 9 mm < ) 30? flush cut, high grade tool steel, anti-glare finish, resharpenable tip cutter. small size. for universal use. 35 tapered head pneumatic side cutters and tip cutters tapered head model a b c max. cu weight description model a b c max. cu weight description model a b c d max. cu weight description relieved head tip cutters angled head note: further head shapes available on request.
the erem protective stop screw increases the performance of the tip cutters: clearance b larger than the diameter = cut wire is ejected clearance b smaller than the wire diameter = cut wire is held adjust the protective stop screw d to set blade c does not hit the opposite side. this improves the lifetime of the blade. 120 mm 20 mm 1,2 mm 70 g flush cut, high grade tool steel, polished tips, esd safe distance cutter with adjustable cutting length from 1,2 mm to 6 mm with setting screw. 530e15a 4,5 mm 115 mm 23 mm 0,8 mm 70 g 573eb 0-5 mm 3,5 mm flush cut, plastic anvil. high grade tool steel, polished tips, esd safe distance cutter with adjustable cutting length from 0 mm to 5 mm with setting screw. replaceable synthetic stop, no risk of board damage. 1,2 - 6 mm flush cut, high grade tool steel, polished tips, esd safe distance cutter. cuts the lead to a predetermined length of 1,5 mm. length from 0,5 mm to 2,5 mm on request, see price list. reduces mechanical shock on components. with adjustable screw for possi- ble wire holding. 530e 115 mm 20 mm 1,0 mm 67 g 45? flush cut, high grade tool steel, polished tips, esd safe distance cutter. cuts the lead to a predetermined length of 1,5 mm. lenght from 0,5 mm to 2,5 mm on request, see price list. reduces mechanical shock on components. 549e 3 mm blade 4,5 mm 120 mm 20 mm 0,8 mm 67 g flush cut, high grade tool steel, polished tips, esd safe distance cutter. cuts the lead to a predetermined length of 1,5 mm. reduces mechanical shock on components. 500-108 3 mm 110 mm 10 mm 1,0 mm 65 g 530s 4 mm 20 mm 30? flush cut, high grade tool steel, polished tips, esd safe distance cutter. cuts and flattens leads to prevent component from fallen off the circuit board. predetermined length of 1,5 mm. length from 0,5 mm to 2,5 mm on request. 120 mm 1,0 mm 67 g 3 mm distance cutters distance cutters model l a e max. cu weight description model l a fe max. cu weight description 36 fixed cutting height adjustable cutting height d b c distance cutters erem distance cutters are available with fixed or adjustable cutting distance. the tips are brightly polished to avoid board damage e 1,5 mm (standard) 1,5 mm 1,5 mm (standard) f 1,5 mm (standard)
120 mm 23 mm 9 mm 1,4 mm 67 g high grade tool steel, anti-glare finish, esd safe flat nose pliers with smooth jaws. 542e 6,5 mm 2,4 mm 125 mm 23 mm 9 mm 3 mm 67 g high grade tool steel/nylon, anti-glare finish, esd safe flat nose pliers with replaceable nylon inserts to prevent nicking e.g. for straightening precious metal, leads, etc. 531e 6,5 mm 5 mm 120 mm 23 mm 9 mm 1,2 mm 67 g 547 6,5 mm 0,9 mm high gr ade tool steel, anti-glare finish, esd safe needle nose pliers with smooth jaws, very precise. 120 mm 23 mm 9 mm 1,6 mm 67 g 543e 6,5 mm 0,8 mm high gr ade tool steel, anti-glare finish, esd safe round nose pliers with smooth jaws, very precise. 37 pliers pliers round nose needle nose flat nose model l a b c e g weight description pliers erem offer a range of pliers with standard and ergonomic handles. model l a b c e g weight description model l a b c e g weight description
120 mm 23 mm 9 mm 1,4 mm 67 g high grade tool steel, anti-glare finish, esd safe chain nose pliers with smooth jaws. 544e 6,5 mm 1 mm 125 mm 23 mm 9 mm 1,4 mm 67 g high grade tool steel, anti-glare finish, esd safe chain nose pliers with smooth jaws, inside serrated. 544d 6,5 mm 1 mm 125 mm 24 mm 9 mm 0,8 mm 67 g 546e 6,5 mm 0,8 mm < ) 60? high grade tool steel, anti-glare finish, esd safe chain nose pliers bent with smooth jaws. d = 6,0 mm pliers pliers 38 model l a b c e g weight description chain nose
160 mm 33 mm 10 mm 1,5 mm 80 g 2242e 5,8 mm 3,5 mm high gr ade tool steel, anti-glare finish, esd safe, ergonomic ergonomic flat nose pliers with long smooth jaws. precise radiused edges. 165 mm 35 mm 10 mm 1,2 mm 80 g 2211p 5,8 mm 1 mm high gr ade tool steel, anti-glare finish, esd safe, ergonomic ergonomic needle nose pliers with smooth jaws. 39 pliers with ergonomic handles* pliers needle nose model l a b c e g weight description flat nose model l a b c e g weight description *ergonomic features see page 18
120 mm 12 mm 12 mm ? 1,5 mm 81 g erop331 7,5 mm < ) 40? flush cut, high quality tool steel, burnished, esd safe tip cutter bent, slim. ideal for fine works. exact guidance of cutting edges. 110 mm 13,5 mm 11 mm 1,0 mm 72 g erop155 7,5 mm - 110 mm 11 mm 9,5 mm - 0,6 mm 61 g semi flush cut, high quality tool steel, burnished, esd safe side cutter, tapered head, slim-line. fine cutting edges for cutting thin wires and cutting tiny components. erop357 7,5 mm 130 mm 18 mm 11 mm 2,0 mm 110 g erop419 8 mm erop cutters and pliers 40 model l a b c max. cu weight description erop cutters and pliers side cutters erop cutters and pliers the newly introduced erop range from erem offers a variety of side cutters and pliers at a budget price. the tools are manufactured from high quality tool steel have a box joint construction, burnished heads, robust opening leaf springs and replaceable soft esd safe grips. tip cutters model l a b d max. cu weight description 110 mm 11 mm 9,5 mm 1,0 mm 61 g semi flush cut, high quality tool steel, burnished, esd safe side cutter, tapered head, slim-line. fine cutting edges for fine work. erop355 7,5 mm semi flush cut, high quality tool steel, burnished, esd safe side cutter, round head. for assembly work on circuit boards, telephone and radio work. semi flush cut, high quality tool steel, burnished, esd safe side cutter robust. round head. for general use.
120 mm 22,5 mm 9,5 mm 2 mm 66 g high quality tool steel, burnished, esd safe needle nose pliers. smooth polished inside jaws for gripping fine parts and forming wire. erop174 6,5 mm 1,5 mm 140 mm 39 mm 12 mm 1,8 mm 90 g high quality tool steel, burnished, esd safe needle nose pliers. serrated, for gripping, holding and forming wires and parts. erop277 7,5 mm 1,2 mm 170 mm 64 mm 13,5 mm 2 mm 113 g erop280 8 mm 1,8 mm high quality tool steel, burnished, esd safe needle nose pliers long. oval pointed. serrated. robust but fine tips for work in confined areas. 125 mm 22,5 mm 9,5 mm 1,6 mm 63 g erop172 6 mm 0,8 mm high quality tool steel, burnished, esd safe round nose pliers. smooth polished inside jaws for bend- ing fine loops. 130 mm 7,5 mm 1,0 mm 84 g erop330 7,5 mm 5,0 mm < ) 40? flush cut, high quality tool steel, burnished, esd safe tip cutter bent. for pcb applications. 41 erop cutters and pliers model l a b d max. cu weight description model l a b c e g weight description erop cutters erop pliers round nose model l a b c e g weight description needle nose
120 mm 21 mm 5 mm 75 g 510ae 4 mm 0,25 - 1,02 mm (a wg 30 - 18) high grade tool steel, anti-glare finish, esd safe front stripping tool. adjustable for different diameters. diameter adjustable with screw. with interchangeable side cutting blade. for all kind of insulation and fibre optic outer jackets. 120 mm 22,5 mm 9,5 mm 1,2 mm 63 g high quality tool steel, burnished, esd safe flat nose pliers. slim smooth jaws for delicate work. erop170 6 mm 3 mm 120 mm 22,5 mm 9,5 mm 1,2 mm 67 g erop171 6 mm 4 mm high quality tool steel, burnished, esd safe flat nose pliers. slim smooth jaws for delicate work. with larger gripping area. stripping tools 42 model l a b c e g weight description high precision stripping tools erem stripping tools are the most precise tools used in the electronic or aviation field. they are manufactured from high grade tool steel to ensure durability. to ensure that you have the correct tool for your application, send us samples of your wire and we will make recommendations. erop pliers flat nose stripping tools front stripping model l a e g 7 mm h weight wire description
120 mm 23 mm 6,5 mm 9 mm 80 g 552e 1 mm 11 mm 0,06 - 0,25 mm (a wg 42-30) high gr ade tool steel, anti-glare finish, esd safe, high precision front stripping tool. unique high precision tool. strips one size at a time without scratching the cores. for all kind of insulation,ptfe, , tefzel, fibre optics or stranded wires. diameter adjustable with screw plus stop screw. replaceable cutting blades. supplied with screwdriver and hex key. 120 mm 21 mm 6,5 mm 9 mm 80 g 552s 6,7 mm 11 mm 0,06 - 0,25 mm (a wg 42-30) 120 mm 22 mm 3 mm 5 mm 67 g 502e30 6,3 mm 2,4 mm 0,25 mm (a wg 30) high gr ade tool steel, anti-glare finish, esd safe, high precision side stripping tool. unique high precision tool. strips one size at a time without scratching the cores. for all kind of insulation,ptfe, , tefzel, fibre optics or stranded wires. diameter adjustable with screw plus screw stop. replaceable cutting blades. supplied with screwdriver and hex key. high grade tool steel, anti-glare finish, esd safe combination side stripping tool. fine replaceable cutting blades. strips resistant insulations such as ptfe, , tefzel, glass reinforced fluoropolymere. this tool combines strip- ping, cutting and bending/gripping. for one specific wire diameter, awg 30 (0,25 mm). other diameters on request. 120 mm 10 mm 0,25 - 1,3 mm (awg 30-16) 75 g 520e 11 mm high grade tool steel, anti-glare finish, esd safe, high precision strips one or several wires simultaneously. particularly designed for mini or standard wire-wrapping work. diameter adjustable with screw plus blocking nut. 43 stripping tools stripping tools model l a e f g h weight wire description model l a e f g h weight wire description side stripping special stripping model l a d wire weight description a d
120 mm 13 mm 10 mm 10 mm 70 g 554e 10 mm 120 mm 23 mm 5,6 mm 4,5 mm 70 g 554a 4 mm high grade tool steel, anti-glare finish, esd safe bending pliers for component leads, etc. u-shape. max. lead : diodes: 0,65 mm capacitors: 0,7 mm resistors: 1/2 w high grade tool steel, anti-glare finish, esd safe bending pliers for component leads, etc. u-shape. axial forming action. max. lead : diodes: 0,65 mm capacitors: 0,7 mm resistors: 1/2 w 120 mm 23 mm 5,6 mm 4,5 mm 70 g high grade tool steel, anti-glare finish, esd safe bending pliers with tapered nose. for component leads, etc. u-shape. axial forming action. max. lead : diodes: 0,65 mm capacitors: 0,7 mm resistors: 1/2 w 554b 2,5 mm pre-forming tools 44 pre-forming tools for passive components model l a d e f weight description pre-forming tools erem offers preforming tools for active and passive components.
120 mm 20 mm 6,5 mm 4 mm 70 g 554tx 6,5 mm 50788 50789z high grade tool steel, anti-glare finish, esd safe bending pliers for forming stress reliefs. one lead left, one lead right in one single operation. for stable insertion. max. lead : diodes: 0,65 mm capacitors: 0,7 mm resistors: 1/2 w 120 mm 23 mm - 3 mm 67 g high grade tool steel, anti-glare finish, esd safe, cut + bend bending pliers. cuts and bends leads of popular radial components to a specific length. max. lead : diodes: 0,65 mm capacitors: 0,7 mm resistors: 1/2 w 4 mm 120 mm 23 mm 3,3 mm - 67 g high grade tool steel, anti-glare finish, esd safe, cut + bend bending pliers. cuts and bends leads of various types of components. max. lead : diodes: 0,65 mm capacitors: 0,7 mm resistors: 1/2 w 3,5 mm 45 pre-forming tools pre-forming tools model l a d e f weight description
120 mm max. 15 mm 3-12 mm 85 g 500103a - 500210e 500104a high grade tool steel, anti-glare finish, esd safe high precision preforming tool. bends flat parts, contacts, power transistors, triac leads, etc. to a right angle. adjustable with screw. 120 mm max. 11 mm 3,8-15 mm 85 g high grade tool steel, anti-glare finish, esd safe, cut + bend high precision preforming tool. improved version of 500103a. cuts and bends to series, power transistor, leds, etc. simultaneously at 90 without stressing the component. simple adjustment (m) and replace- able cutting blade. - 120 mm max. 13 mm 3,5-15 mm 85 g 3 leads, high grade tool steel, anti-glare finish, esd safe high precision preforming tool for 3 leads. bends to 126, 218, 220, power transistor leads, etc. at 90 in two rows. adjustable (m) with screw. 2,54 mm pre-forming tools pre-forming tools 46 pre-forming tools for active components model l k mi weight description for active components 120 mm max. 13 mm 3,5-15 mm 85 g 500104ai 2,54 mm 3 leads, high grade tool steel, anti-glare finish, esd safe, central lead backwards high precision preforming tool for 3 leads. bends to 126, 218, 220, power transistor leads, etc. at 90 in two rows. adjustable (m) with screw. central lead backwards.
47 pre-forming tools pre-forming tools for active components 500154a 500154ai 120 mm max. 13 mm 4,5-9,5 mm 90 g 5 leads, high grade tool steel, anti-glare finish, esd safe high precision preforming tool for 5 leads.. bends to 126, 218, 220, power transistor leads, etc. at 90 in two rows. adjustable (m) with screw. 2,54 mm 120 mm max. 13 mm 4,5-9,5 mm 90 g 5 leads, high grade tool steel, anti-glare finish, esd safe, opposite leads backwards high precision preforming tool for 5 leads.. bends to 126, 218, 220, power transistor leads, etc. at 90 in two rows. adjustable (m) with screw. opposite leads backwards. 2,54 mm 120 mm max. 13 mm 17 mm 2,8 mm 100 g high grade tool steel, anti-glare finish, esd safe high precision preforming tool. for flat packs, quads, etc. no friction effect. designed after mil specs. cuts + bends. 80013c model l k m i weight description for flat packs, quads model l a k m weight description 120 mm 25 mm 0,9 mm 98 g 809ic high grade tool steel, anti-glare finish, esd safe high precision preforming tool. cuts and bends dil pins to a 90 angle in one operation. for up to 20 pin ic. allows dil-ics to go smt. model l e f weight description for dil / ic or
120 mm 20 mm 27 mm 32 mm 36 mm 36 mm 505c 505e 505a 505bgc 505bg - 505 high grade tool steel, anti-glare finish, esd safe inserting and extracting pliers. available sizes see chart. adjustable with screw. insertion: squeeze ic pins. extraction: adjust jaws width so that pins stay in the middle of holes. ic and smd tools ic and smd tools 48 model l e weight model description inserting and extracting ic and smd tools erem ic and smd tools for inserting, extracting, straightening and cutting of ics and smds 130 mm 23 mm 42 mm 120 g 808g 1 mm 16 pins, high grade tool steel, anti-glare finish, esd safe straightening pliers. for multiple dil / ic leads. before insertion or after soldering. laterally (a) or parallel (b). for up to 16 pins. ideal maintenance tool. 125 mm 23 mm 20 mm 85 g 508z 1 mm 8 pins, high grade tool steel, anti-glare finish, esd safe straightening pliers. for multiple dil / ic leads. before insertion or after soldering. laterally (a) or parallel (b). for up to 8 pins. ideal mainte- nance tool. straightening model l a g e weight description (a) (b) (a) (b) pins: width:
49 ic and smd tools ic and smd tools 110 mm 10 mm 3 mm 48 g flush, high grade tool steel, anti-glare finish, esd safe, resharpenable high precision tip cutter. for cutting leads of smd micro packages up to 0,25 mm or fine pitch components less than 1/20? cuts pins before heat desoldering. essential smd tool. no breakage guarantee. for ?pitches below 0,5 mm model 670epf is necessary. please supply ic together with order. 670ep 2 mm 115 mm 20 mm 4 mm - 67 g 593ae flush, high grade tool steel, anti-glare finish, esd safe, resharpenable high precision tip cutter bent. for cutting dil leads from the rear. ideal maintenance tool. cuts pins before heat desoldering. model l a d e weight description cutting trimming 120 mm 21 mm 3,5 mm 1,5 mm 74 g 8 pins, high grade tool steel, anti-glare finish, esd safe, trim trimming pliers. trims an entire row of 8 pins to the same length. the lead tips are cut flat. for multiple dil / ic leads. before insertion or after soldering. 509e 21,5 mm model l a d e f weight description
fibre optic tools 50 120 mm 21 mm 6,5 mm 9 mm 80 g 552s 6,7 mm 11 mm 0,06 - 0,25 mm a wg 42 - 30 high gr ade tool steel, anti-glare finish, esd safe, high precision side stripping tool. unique high precision tool. strips one size at a time without scratching the cores. for all kind of insulation,ptfe, , tefzel, fibre optics or stranded wires. diameter adjustable with screw plus screw stop. with replaceable cutting blade. supplied with screwdriver and hex key. fixed standard like 125 on request. fibre optic tools 130 mm 20 g 249sa special stainless steel / pps, anti-glare finish, non-magnetic, esd safe, suitable for fibre optics precision tweezers with serrated grips and synthetic tips (pps). heat resistant up to 250? (480?). resistant to acids and solder. waterproof, esd safe. does not damage fibre optic cores. model 115 mm 15 mm 10,5 mm 67 g semi flush cut, tungsten carbide blades, anti-glare finish, esd safe side cutter with tungsten carbide blades. for cutting vectran braided wires, fibre optics, kevlar and small stainless steel braids. ask for special application. 599tfo 6,5 mm 11,5 mm 10,5 mm 6,5 mm l weight description 115 mm 67 g 599fo a unique high precision cutter for kevlar silks cuts all silks even very close to fibre core. avoid any other application. model la b c weight description model l a e f g h weight wire description side stripping cutting holding / gripping fibre optic tools high precision tools for working on fibre optics.
51 kits kits kits erem kits offer a range of popular tweezers, cutters and pliers in different combinations. 230 mm 30 mm 350 g 130 mm 3900kc black plastic case, cushioned, esd safe, consists of: tweezers 51sa precision tweezers 115 mm, bent 30 , relieved. very fine tips. stainless steel, anti-glare finish, non-magnetic. 102aca smd tweezers 115 mm, with angled head and blunted edges to avoid board damaging. for handling of small components. special stainless steel, anti-glare finish, non-magnetic. 103aca smd tweezers 115 mm, with angled head 45 and blunted edges to avoid board damaging. for horizontal handling of small components. special stainless steel, anti-glare finish, non-magnetic. 150samb smd tweezers 120 mm, bent 40? serrated handles. for gripping small cylindrical parts 1,2 - 2,5 mm, special stainless steel, anti-glare finish, non-magnetic. 150samf smd tweezers 120 mm, straight, serrated handles. for gripping small cylindrical parts 1,2 ?2,5 mm, special stainless steel, anti-glare finish, non-magnetic. cutters 670ep high precision tip cutter 110 mm. for cutting leads of smd micro packages up to 0,25 mm or fine pitch components less than 1/20? flush cut, high grade tool steel, anti-glare finish, esd safe. width thickness weight description model l kit for smd handling
25 mm 15 g adapter 360 rotating head for housing 3000esd. with straight nozzle, stainless steel for direct pick-up or as adapter for suction tips or suction cups. 3200 5 mm 5 g 3231 adapter adapter fix. for use with suction tips series 3300. 15 mm total 3 g 3231 adapter can be used with or without tips, fix. holds either suction cup 2052e or tips 2040z, 2041z, 2044z. 140 mm 10 mm 35 g 3000esd housing housing with axial air switch, ergonomic shape, serrated grip area, esd safe. professional device. 3000 esd 3740 (optional) 3200 2040z / 2044z / 2041z 2052e 3303 / 3305z / 3310z / 3315 / 3330 3231 3232 2040z / 2044z / 2041z 2052e vacuum manipulator the erem 3000 series offers a vacuum micro manipulation system for precise handling of tiny components as well as flat parts. for use in mechanical assembly, laboratories, etc. the advantages are: easy pick up of components or silicon wafers immediate pick up and release of the parts full 360? rotating system direct axial air switch ergonomic shape reduces hand and wrist fatigue esd safe vacuum manipulator vacuum manipulator 52 housing inserts for housing 3000esd adapter model l diameter weight description model l weight description 3231 3232
model 0,15 mm suction tip str aight, ptfe, tip for use with rotating head 3200 or fix adapter 3232. 0,70 mm 2040z 0,90 mm suction tip straight, polyethylene tip for use with rotating head 3200 or fix adapter 3232. 1,30 mm 2044z 1,40 mm 2,0 mm 2041z suction tip straight, polyethylene tip for use with rotating head 3200 or fix adapter 3232. 0,16 mm 0,30 mm 3303 3305z 3310z 3315 3330 0,25 mm 0,50 mm 0,65 mm 1,0 mm 1,0 mm 1,5 mm 2,5 mm suction needle bent 45? stainless steel for use with fix adapter 3231. 3,0 mm suction needle bent 45? stainless steel for use with fix adapter 3231. suction needle bent 45? stainless steel for use with fix adapter 3231. suction needle bent 45? stainless steel for use with fix adapter 3231. suction needle bent 45? stainless steel for use with fix adapter 3231. 53 vacuum manipulator vacuum manipulator suction tips straight inside description model outside inside description model outside suction needles suction cups 4,5 mm suction cup, silicone rubber for use with rotating head 3200 or fix adapter 3232. 2052e model diameter description 2044z
140 mm (length) pick-up device pick-up device for silicon wafers up to 8". esd-safe. needs min. -600 mbar vacuum. for use with suction plates 3503a or 3503b. 3000wesd insert for vertical pick-up for silicon wafer s up to 8" for vertical pick up. armite suction plate with stainless steel tube, esd safe. 3503a insert for horizontal pick-up for silicon wafers up to 8" stainless steel tubing bent for horizontal pick up. angles can be determined by customer, no price surcharge. armite suction plate with stainless steel tube, esd safe. 3503b wafer handling vacuum manipulator 54 wafer handling . 3000 wesd 3503a 3503b 30 mm 80 mm 20 mm 2,5 mm 20 mm 2,5 mm 30 mm 73 mm 20 mm model size description
3000kcesd 55 accessories vacuum kit vacuum manipulator weight description model size pump membrane pump 230v, silent running, air volume 5 l/min, max. vacuum -250 mbar. (not suitable for wafer pick up) 3714z tubing system tubing system flexible, 1,8 m, esd safe. 3008esd filter filter for tubing system 3008esd. 3717 table holder table holder for 3000esd and 3000wesd housing (without accessory). 3740 model description 400 x 320 x 105 mm 2,2 kg black plastic case, cushioned, consists of: 3000esd housing 3200 head / adapter rotating 3231 adapter fixed 3305z, 3310z, 3315 suction needles bent 2052e suction cup 4,5 mm kds 260l suction cup 9,5 mm 3740 table holder for 3000esd 3714z membran pump 230 v 3008esd tubing system 1,8 m 3717 air filter 102aca smd tweezers 115 mm size weight description model content subject to change without prior notice.
notes 56
57 notes
index 58 model page model page model page 024c . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 1sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1sasl . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 2ASAru . . . . . . . . . . . . . . . . . . . . . . . . .11 2ASAsl . . . . . . . . . . . . . . . . . . . . . . . . . .11 2ASAslt . . . . . . . . . . . . . . . . . . . . . . . . .11 2sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2sasl . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 3cbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3cs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3csa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3csasl . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3cta . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3sasl . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4sasl . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5asa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5asasl . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5bsa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5csa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5fsa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5mbs . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 5sasl . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 7sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 7sasl . . . . . . . . . . . . . . . . . . . . . . . . . . .10 11n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 15ags . . . . . . . . . . . . . . . . . . . . . . . . . . .15 15agw . . . . . . . . . . . . . . . . . . . . . . . . . .15 20as . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 21sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 24sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 25sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 29sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 29w30 . . . . . . . . . . . . . . . . . . . . . . . . . .15 29y . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 30sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 32bsa . . . . . . . . . . . . . . . . . . . . . . . . . . .13 32bsa20 . . . . . . . . . . . . . . . . . . . . . . . . .13 32bsa25 . . . . . . . . . . . . . . . . . . . . . . . . .12 39sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 40sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 51sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 51sasl . . . . . . . . . . . . . . . . . . . . . . . . . . .9 52ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11 53csa . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 64sa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 65asa . . . . . . . . . . . . . . . . . . . . . . . . . . .10 91sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 102aca . . . . . . . . . . . . . . . . . . . . . . . . .12 102acax . . . . . . . . . . . . . . . . . . . . . . . .12 103aca . . . . . . . . . . . . . . . . . . . . . . . . .12 140sa . . . . . . . . . . . . . . . . . . . . . . . . . . .14 141sap . . . . . . . . . . . . . . . . . . . . . . . . . .14 141saph . . . . . . . . . . . . . . . . . . . . . . . . .14 150sa . . . . . . . . . . . . . . . . . . . . . . . . . . .13 150sad . . . . . . . . . . . . . . . . . . . . . . . . . .12 150samb . . . . . . . . . . . . . . . . . . . . . . . .13 150samf . . . . . . . . . . . . . . . . . . . . . . . .12 151sa . . . . . . . . . . . . . . . . . . . . . . . . . . .13 249sa . . . . . . . . . . . . . . . . . . . . . . . . .7, 50 249cer . . . . . . . . . . . . . . . . . . . . . . . . . . .7 258sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 500asa . . . . . . . . . . . . . . . . . . . . . . . . . .14 600asa . . . . . . . . . . . . . . . . . . . . . . . . . .14 600jsa . . . . . . . . . . . . . . . . . . . . . . . . . .14 608asa . . . . . . . . . . . . . . . . . . . . . . . . . .14 940as . . . . . . . . . . . . . . . . . . . . . . . . . . .13 aas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 aasa . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 aasasl . . . . . . . . . . . . . . . . . . . . . . . . . . .7 aassl . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 aaz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 acsa . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 am . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 e2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11 e3csa . . . . . . . . . . . . . . . . . . . . . . . . . . .11 e5sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 e7sa . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 eoosa . . . . . . . . . . . . . . . . . . . . . . . . . .11 m4as . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 m5s . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 oobsa . . . . . . . . . . . . . . . . . . . . . . . . . . .6 oocsa . . . . . . . . . . . . . . . . . . . . . . . . . . .6 oodsa . . . . . . . . . . . . . . . . . . . . . . . . . . .6 oosa . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 oosasl . . . . . . . . . . . . . . . . . . . . . . . . . .6 rrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 sssa . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 sssasl . . . . . . . . . . . . . . . . . . . . . . . . . . .7 index tweezers suffix none carbone steel e (prefix) ergonomic handles m brass, soft material to avoid damage, no sparks n nickel-silver alloy, absolut nicht pyr pyroplast coating ru anti adhesive coating s stainless steel sa, ca special stainless steel, non-magnetic, acid resistant sl economy version ta titanium, non-magnetic, lightweight, high temperature resistant z nickel plated
59 index cutters and pliers index model page model page model page 147a . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 500108 . . . . . . . . . . . . . . . . . . . . . . . . . .36 500103a . . . . . . . . . . . . . . . . . . . . . . . . .46 500104a . . . . . . . . . . . . . . . . . . . . . . . . .46 500104ai . . . . . . . . . . . . . . . . . . . . . . . .46 500154a . . . . . . . . . . . . . . . . . . . . . . . . .47 500154ai . . . . . . . . . . . . . . . . . . . . . . . .47 500210e . . . . . . . . . . . . . . . . . . . . . . . . .46 502e30 . . . . . . . . . . . . . . . . . . . . . . . . . .43 503et . . . . . . . . . . . . . . . . . . . . . . . . . . .30 503et . . . . . . . . . . . . . . . . . . . . . . . . . . .30 503etf . . . . . . . . . . . . . . . . . . . . . . . . . .30 504ae . . . . . . . . . . . . . . . . . . . . . . . . . . .30 505a/bg/bgc/c/e . . . . . . . . . . . . . . . . . .48 50788 . . . . . . . . . . . . . . . . . . . . . . . . . . .45 50789z . . . . . . . . . . . . . . . . . . . . . . . . . .45 508z . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 509e . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 510ae . . . . . . . . . . . . . . . . . . . . . . . . . . .42 511e . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 512e . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 512n . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 520e . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 521e . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 522e . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 522n . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 530e . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 530e15a . . . . . . . . . . . . . . . . . . . . . . . . .36 530s . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 531e . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 532n . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 542e . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 543e . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 544d . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 544e . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 546e . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 547 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 549e . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 552e . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 552s . . . . . . . . . . . . . . . . . . . . . . . . .43, 50 554a . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 554b . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 554e . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 554tx . . . . . . . . . . . . . . . . . . . . . . . . . . .45 555e . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 570e . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 572e . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 573e . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 573eb . . . . . . . . . . . . . . . . . . . . . . . . . . .36 575e . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 576tx . . . . . . . . . . . . . . . . . . . . . . . . . . .26 576z . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 577e . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 582e . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 582ew . . . . . . . . . . . . . . . . . . . . . . . . . .31 592e . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 593ae . . . . . . . . . . . . . . . . . . . . . . . .31, 49 595e . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 595t . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 595tf . . . . . . . . . . . . . . . . . . . . . . . . . . .25 597e . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599e . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599fo . . . . . . . . . . . . . . . . . . . . . . . . . . .50 599t . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599tf . . . . . . . . . . . . . . . . . . . . . . . . . . .23 599tfo . . . . . . . . . . . . . . . . . . . . . . .23, 50 611e . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 612e . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 612n . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 622n . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 622na . . . . . . . . . . . . . . . . . . . . . . . . . .24 622nb . . . . . . . . . . . . . . . . . . . . . . . . . . .25 632n . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 632ncf . . . . . . . . . . . . . . . . . . . . . . . . . .26 670e . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 670ep . . . . . . . . . . . . . . . . . . . . . . . .32, 49 670epf . . . . . . . . . . . . . . . . . . . . . . .32, 49 676e . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 677e . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 710e . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 776e . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 792e . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 80013c . . . . . . . . . . . . . . . . . . . . . . . . . .47 808g . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 809ic . . . . . . . . . . . . . . . . . . . . . . . . . . .47 812n . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 822n . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 884e . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 884epcm . . . . . . . . . . . . . . . . . . . . . . . .27 886e . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 896e . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 1500bsf . . . . . . . . . . . . . . . . . . . . . . . . .34 1503n . . . . . . . . . . . . . . . . . . . . . . . . . . .35 1512n . . . . . . . . . . . . . . . . . . . . . . . . . . .34 1522n . . . . . . . . . . . . . . . . . . . . . . . . . . .34 1522na . . . . . . . . . . . . . . . . . . . . . . . . .35 1522nb . . . . . . . . . . . . . . . . . . . . . . . . . .35 2040z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2041z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2044z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2052e . . . . . . . . . . . . . . . . . . . . . . . . . . .53 2211p . . . . . . . . . . . . . . . . . . . . . . . . . . .39 2212e . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2222e . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2222ea . . . . . . . . . . . . . . . . . . . . . . . . . .28 2222eb . . . . . . . . . . . . . . . . . . . . . . . . . .28 2232e . . . . . . . . . . . . . . . . . . . . . . . . . . .27 2242e . . . . . . . . . . . . . . . . . . . . . . . . . . .39 2282e . . . . . . . . . . . . . . . . . . . . . . . . . . .33 3000esd . . . . . . . . . . . . . . . . . . . . . . . . .52 3000kcesd . . . . . . . . . . . . . . . . . . . . . . .55 3000wesd . . . . . . . . . . . . . . . . . . . . . . .54 3008esd . . . . . . . . . . . . . . . . . . . . . . . . .55 3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 3231 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 3232 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 3303 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3305z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3310z . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3315 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3330 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 3503a . . . . . . . . . . . . . . . . . . . . . . . . . . .54 3503b . . . . . . . . . . . . . . . . . . . . . . . . . . .54 3714z . . . . . . . . . . . . . . . . . . . . . . . . . . .55 3717 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 3740 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 3900kc . . . . . . . . . . . . . . . . . . . . . . . . . .51 erop155 . . . . . . . . . . . . . . . . . . . . . . . . .40 erop170 . . . . . . . . . . . . . . . . . . . . . . . . .42 erop171 . . . . . . . . . . . . . . . . . . . . . . . . .42 erop172 . . . . . . . . . . . . . . . . . . . . . . . . .41 erop174 . . . . . . . . . . . . . . . . . . . . . . . . .41 erop277 . . . . . . . . . . . . . . . . . . . . . . . . .41 erop280 . . . . . . . . . . . . . . . . . . . . . . . . .41 erop330 . . . . . . . . . . . . . . . . . . . . . . . . .41 erop331 . . . . . . . . . . . . . . . . . . . . . . . . .40 erop355 . . . . . . . . . . . . . . . . . . . . . . . . .40 erop357 . . . . . . . . . . . . . . . . . . . . . . . . .40 erop419 . . . . . . . . . . . . . . . . . . . . . . . . .40
round head side cutters 60 ? 2004, cooper industries, inc. specifications subject to change without notice. 005 56 851 00 / 03.04 wal 5.0 germany great britain cooper tools gmbh cooper tools ltd. carl-benz-str. 2 suite 15, coniston house 74354 besigheim town centre tel: (07143) 580-0 washington, tyne & wear fax: (07143) 580-108 ne38 7rn tel: (0191) 419 7700 fax: (0191) 417 9421 france italy switzerland cooper tools s.a. cooper italia s.p.a. erem s.a. 25 rue maurice chevalier bp 46 viale europa 80 rue de la roseli?re 8 77832 ozoir-la-ferri?re cedex 20090 cusago (mi) 1400 yverdon les bains tel: (01) 60.18.55.40 tel: (02) 9033101 tel: (024) 426 12 06 fax: (01) 64.40.33.05 fax: (02) 90394231 fax: (024) 425 09 77

▲Up To Search▲

Price & Availability of 2ASA

	To Download 2ASA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .