View NUTINY-SDK-M051_7625042.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NUTINY-SDK-M051 user?s manual 1 NUTINY-SDK-M051 user?s manual for numicro m051 ? series the information described in this document is the exclusive intellectual property of nuvoton technology corporation and shall not be reproduced without permission from nuvoton. nuvoton is providing this document only for reference purposes of numicro ? microcontroller based system design. nuvoton assumes no responsibility for errors or omissions. all data and specifications are subject to change without notice. for additional information or questions, please contact: nuvoton technology corporation.
NUTINY-SDK-M051 user?s manual 2 1 overview ..................................................................................................... 3 2 NUTINY-SDK-M051 introduction ....................................................................... 3 2.1 nutiny -sdk-m051 jumper description .................................................................... 4 2.2 pin assignment for extended connector .................................................................... 5 2.3 NUTINY-SDK-M051 pcb placement ........................................................................... 5 3 how to start nutiny -sdk-m051 on the keil uvision ? ide ................................... 6 3.1 keil uvision ? ide software download & install .......................................................... 6 3.2 nuvoton nu-link driver download & install ............................................................... 6 3.3 hardware setup .................................................................................................... 6 3.4 smpl_nutiny-m051 example program ...................................................................... 7 4 how to start NUTINY-SDK-M051 on the iar embedded workbench ....................... 8 4.1 iar embedded workbench software download &install .............................................. 8 4.2 nuvoton nu-link driver download & install ............................................................... 8 4.3 hardware setup .................................................................................................... 8 4.4 smpl_nutiny-m051 example program ...................................................................... 9 5 m052_tiny-evb schematic .......................................................................... 10 6 to download numicro ? family releated files from nuvoton company ............... 11 6.1 to download numicro ? keil uvision ? ide driver ...................................................... 11 6.2 to download numicro ? iar ewarm driver .............................................................. 12 6.3 to download numicro ? m051 series bsp software library ........................................ 13 7 revision history .......................................................................................... 13
NUTINY-SDK-M051 user?s manual 3 1 overview NUTINY-SDK-M051 is the specific development tool for numicro m051 ? series ?m052/m054/m058/m0516. users can use NUTINY-SDK-M051 to develop and verify the application program easily. NUTINY-SDK-M051 includes 2 portions. one is m052_tiny-ev b and the other is nu-link-me. m052_tiny-evb is evaluation board and nu-link-me is its debug adaptor. thus, users do not need additional ice equipment. 2 NUTINY-SDK-M051 introduction NUTINY-SDK-M051 can support numicro m051 ? series. figure 2-1 is NUTINY-SDK-M051 for m051 series and the left portion is called m052-tiny-evb and the right portion is debug adaptor called nu-link-me. m052-tiny-evb is similar to other development board. users can use it to develop and verify applications to emulate the real behavior. in fact, the real chip m0516lan is m ounted on the board. the on board chip covers m052, m054 and m058?s features. the m052_tiny-evb can be a real sy stem controller to design user target system. nu-link-me is a debug adaptor. the nu-link-me debug adaptor connects your pc's usb port to your target system (via serial wired debug port) and allows you to program and debug embedde d programs on the target hardware. to use nu-link-me debug adaptor with keil or iar please refer to ?nuvoton numicro ? iar ice driver user manual ? or nuvoton numicro ? keil ice driver user manual? in detail. figure 2-1 NUTINY-SDK-M051 (green color pcb board)
NUTINY-SDK-M051 user?s manual 4 2.1 nutiny -sdk-m051 jumper description 2.1.1 power setting z jp2: vcc5 voltage connecter in m052_tiny-evb z j2: usb port in nu-link-me power model j1 usb port j2 usb port jp2 vcc5 mcu voltage model 1 x connect to pc dc 5v output dc 5v model 2 x x dc 2.8-5.5v input voltage by vcc input x: not use. 2.1.2 debug connector z jp4: target ice connector in m052_tiny-evb z jp8: nuvoton ice connector in nu-link-me 2.1.3 usb connecter z j1: mini usb connecter in m052_tiny-evb z j2: mini usb connecter in nu-link-me 2.1.4 extended connecter z jp1, jp5, jp6 and jp7: show all of chip pins in m052_tiny-evb 2.1.5 reset button z sw1: reset button in m052_tiny-evb 2.1.6 power connecter z jp2: vcc connecter in m052_tiny-evb z jp3: gnd connecter in m052_tiny-evb
NUTINY-SDK-M051 user?s manual 5 2.2 pin assignment for extended connector m052_tiny-evb provides m0516lan on board and the extended connector for lqfp-48 pin. table 2-1 is the pin assignment for m0516lan. pin no pin name pin no pin name 01 mosi_0,ain5,p1.5 25 p2.5,ad13,pwm5 02 miso_0,ain6,p1.6 26 p2.6,ad14,pwm6 03 sclk0,ain7,p1.7 27 p2.7,ad15,pwm7 04 /rst 28 p4.4,/cs 05 p3.0,rxd 29 p4.5,ale 06 avss 30 p4.6,ice_clk 07 p3.1,txd 31 p4.7,ice_data 08 p3.2,/int0,stadc 32 p0.7,ad7,sclk1 09 p3.3,/int1,mclk 33 p0.6,ad6,miso_1 10 p3.4, t0,sda 34 p0.5,ad5,mosi_1 11 p3.5,t1,scl 35 p0.4,ad4,/ss1 12 p4.3,pwm3 36 p4.1,pwm1 13 p3.6,/wr,cko 37 p0.3,ad3,rts0 14 p3.7,/rd 38 p0.2,ad2,cst0 15 xtal2 39 p0.1,ad1,rts1 16 xtal1 40 p0.0,ad0,cts1 17 vss 41 vdd 18 ldo_cap 42 avdd 19 p2.0,ad8,pwm0 43 p1.0,ain0,p1.0 20 p2.1,ad9,pwm1 44 p1.1,ain1,t3 21 p2.2,ad10,pwm2 45 p1.2,ain2,rxd1 22 p2.3,ad11,pwm3 46 p1.3ain3,txd1 23 p2.4,ad12,pwm4 47 p1.4,ain4,/ss0 24 p4.0,pwm0 48 p4.2,pwm2 table 2-1 pin assignment for m0516lan 2.3 NUTINY-SDK-M051 pcb placement users can refer figure 2-2 for the nutiny -sdk-m051 pcb placement. figure 2-2 NUTINY-SDK-M051 pcb placement
NUTINY-SDK-M051 user?s manual 6 3 how to start nutiny -sdk-m051 on the keil uvision ? ide 3.1 keil uvision ? ide software download & install please connect to keil company website (http:// www.keil.com ) to download the keil uvision ? ide and install the rvmdk. 3.2 nuvoton nu-link driver download & install please connect to nuvoton company numicro ? website ( http:// www.nuvoton.com/numicro ) to download ?numicro ? keil uvision ? ide driver? file. please refer the chapter 6.1 for the detail download flow. when the download had finished, please unzip the file and execute the ?n u-link_keil_driver.exe? to install the driver. 3.3 hardware setup the hardware setup is shown as figure 3-1 figure 3-1 NUTINY-SDK-M051 hardware setup
NUTINY-SDK-M051 user?s manual 7 3.4 smpl_nutiny-m051 example program this example demonstrates the ease of downloading a nd debugging an application on a NUTINY-SDK-M051 board. the example can be found on the figure 3-2 list directory. directory project file figure 3-2 smpl_nutiny-m051 example directory to use this example: ? start uvision ? open the smpl_nutiny-m051.uvproj project file project-open ? compile and link the smpl_nutiny-m051 application project - build ? program the application into on-chip flash rom flash ? download the led will toggle on the m052_tiny-evb board. start debug mode using the debugger commands, you may: ? single step through code ? run the application\ ? review variables in the watch window ? reset the device to re-run the application
NUTINY-SDK-M051 user?s manual 8 4 how to start NUTINY-SDK-M051 on the iar embedded workbench 4.1 iar embedded workbench software download &install please connect to iar company website (http:// www.iar.com ) to download the iar embedde d workbench and install the ewarm. 4.2 nuvoton nu-link driver download & install please connect to nuvoton company numicro ? website ( www.nuvoton.com/numicro ) to download ?numicro ? iar ice driver user manual? file. please refer the 6.2 for the detail download flow. when the download had finished, please unzip the file and execute the ?nu-link_i ar_driver.exe? to install the driver. 4.3 hardware setup the hardware setup is shown as figure 3-1 figure 4-1 nutiny- sdk-m051 hardware setup
nutiny-sdk user?s manual 9 4.4 smpl_nutiny-m051 example program this example demonstrates the ease of downloading a nd debugging an application on a NUTINY-SDK-M051 board. the example can be found on the figure 3-2 list directory. (samples code can be download from nuvoton website) directory project file figure 4-2 smpl_nutiny-m051 example directory to use this example: ? start iar embeded workbench ? open the smpl_nutiny-m051.eww workspace file file-open-workspace ? compile and link the smpl_nutiny-m051 application project - make ? program the application into on-chip flash rom project ? download and debug the i/o will toggle on the m052_tiny-evb board.
NUTINY-SDK-M051 user?s manual 10 5 m052_tiny-evb schematic cb1 0.1u c0603 davdd r11 10k 0805r 1 2 io kpt-2012 kp-2012 net2 vcc pin13 u1 m052 lqfp 48 ncu1 20_lqfp_48 ain1/t2/p1.1 44 ain2/rxd1/p1.2 45 ain3/txd1/p1.3 46 ain3/ss0/p1.4 47 p4.2 48 mosi_0/ain5/p1.5 1 miso_0/ain6/p1.6 2 sclk0/ain7/p1.7 3 vss 17 ldo_cap 18 p2.0/ad8/pwm0 19 p2.1/ad9/pwm1 20 p2.2/ad10/pwm2 21 p2.3/ad11/pwm3 22 p2.4/ad12/pwm4 23 p4.0 24 p2.6/ad14/pwm6 26 p4.6/ice_clk 30 p4.7/ice_dat 31 p0.7/ad7/sclk1 32 p0.6/ad6/miso_1 33 p0.5/ad5/mosi_1 34 p0.4/ad4/ss1 35 p4.1 36 p0.3/ad3/rts0 37 p0.2/ad2/cts0 38 p0.1/ad1/rts1 39 rst 4 rxd/p3.0 5 avss 6 mclk/int1/p3.3 9 txd/ p3. 1 7 int0/p3.2 8 sda/t0/p3.4 10 scl/t1/p3.5 11 pwm3/p4.3 12 p3.6/wr/cko 13 p4.5/ale 29 p4.4/cs 28 ain0/t2/p1.0 43 avdd 42 vdd 41 p0.0/ad0/cts1 40 p3.7/rd 14 xtal1 16 xtal2 15 p2.5/ad13/pwm5 25 p2.7/ad15/pwm7 27 pin48 c2 10uf tan t-b 1 2 power kpt-2012 kp-2012 pr 10k 0805r vcc net3 d12mi pin36 davdd pin35 pin34 pin1 pin33 pin2 pin32 pin3 pin31 ticedat pin4 ti cer st pin30 ticeclk pin5 pin29 pin6 pin28 pin7 adavss from ice bridge's usb power pin8 pin27 ice interface ti c ed at ti c er st vcc jp4 header 5x2 header5x2 1 2 3 4 5 6 7 8 9 10 ti c ec lk pin9 vcc c1 10uf/10v tant-a r1 10k 0805r reset circuit ticerst sw1 push bottom sw pin26 pin10 c5 20p 0805c x2 12mhz xtal3-1 r4 1m 0805r d12mo c3 20p 0805c r2 33 0805r net1 pin11 pin25 jp2 header 2 header2 1 2 tp1 sip/1p 1 jp3 header 2 header2 1 2 pin12 pin18 tit le size document number rev date: sheet of m052_tiny _v002.dsn 004 nuvoton m052_tiny-evb board versin 002 11 tuesday , august 10, 2010 tp2 sip/1p 1 ti cer st vcc adavss d12mo d12mi vcc l1 l0603 davdd tp3 sip/1p 1 jp5 header 6x2 header6x2 1 2 3 4 5 6 7 8 9 10 11 12 pin2 pin1 pin4 pin3 pin8 pin6 pin5 pin11 pin10 pin9 pin7 pin12 pin14 jp6 header 6x2 header6x2 1 2 3 4 5 6 7 8 9 10 11 12 pin26 pin25 pin29 pin28 pin27 pin31 pin30 pin33 pin32 pin35 pin34 pin36 jp1 header 6x2 header6x2 1 2 3 4 5 6 7 8 9 10 11 12 pin39 pin38 pin37 pin41 pin40 pin45 pin44 pin43 pin42 pin46 pin47 pin15 l2 l0603 pin16 crystal pin46 pin40 pin48 pin44 pin47 pin41 pin39 pin38 pin37 pin45 pin43 pin42 pin13 ti cec lk ti ced at ti cer st ti c erst ti c edat ti c eclk jp7 header 6x2 header6x2 1 2 3 4 5 6 7 8 9 10 11 12 pin17 pin20 pin19 pin18 pin16 pin15 pin14 pin13 pin21 pin20 pin19 pin18 pin17 pin24 pin23 pin22 pin21 pin24 pin23 pin22
NUTINY-SDK-M051 user?s manual 11 6 to download numicro ? family releated files from nuvoton company 6.1 to download numicro ? keil uvision ? ide driver step1 to connect to the nuvoton numicro ? website: http://www.nuvoton.com/numicro step2 step 3 step 4 to download the :umicro keil uvision ? ide driver
NUTINY-SDK-M051 user?s manual 12 6.2 to download numicro ? iar ewarm driver step1 to connect to the nuvoton numicro ? website: http://www.nuvoton.com/numicro step2 click here to enter devlopment tools page step 3 step 4 to download the numicro ? iar embeded workbench ? driver
NUTINY-SDK-M051 user?s manual 13 6.3 to download numicro ? m051 series bsp software library step1 to connect to the nuvoton numicro ? website: http://www.nuvoton.com/numicro step2 step 3 to download the numicro m051 ? series software library 7 revision history version date page description 1.0 aug. 20, 2010 -- initial issued
NUTINY-SDK-M051 user?s manual 14 important notice nuvoton products are not designed, intended, authorized or warranted for use as components in systems or equipment intended for surgical impl antation, atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal in struments, combustion control instruments, or for other applications intended to support or sustain life. further more, nuvoton products are not intended for applications wherein failure of nuvoton products could result or lead to a situation wherein personal injury, death or severe property or environmental damage could occur. nuvoton customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify nuvoton for any damages resulting from such improper use or sales. please note that all data and specifications are subject to change without notice. all the trademarks of products and companies mentioned in this datasheet belong to their respective owners.

▲Up To Search▲

Price & Availability of NUTINY-SDK-M051

	To Download NUTINY-SDK-M051 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .