ESDA6V8UF transil array for data protection description: the ESDA6V8UF is 4-channel very low capacitance esd transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge. it is particularly well-suited to protect systems with high speed communication lines from esd, eft, and lighting. the ESDA6V8UF is consists of eight low capacitance steering diodes and a tvs diode in a sot23-6l package. each channel of ESDA6V8UF could safely dissipate esd strikes of 15kv air discharge as well as 8kv contact discharge, meeting the requirement of the iec 61000-4-2 international standard. using the mil-std-883 (method 3015) specification for human body model (hbm) esd, the device provides protection for contact discharges to greater than 10 kv. the ESDA6V8UF can be used at 5v or lower than 5v revers working voltage applications. mechanical characteristics sot23-6l package pbfree packages are av ailable molding com pound flammability rating: ul 94v-0 packaging: tape and reel per eia 481 specification features: standoff voltage: 5v peak power up to 75 watt s @ 8 x 20 us pulse low leakage current ie c6100042 level 4 esd protection i ec610004 4 level 4 eft protection low capacitance: 0.7 pf typical y w w =date code (y=year ,0,1,2 ;w w =week ,a,b ) 6v8u=specific device code applications high speed communication line protection usb 2.0 power and data line protection monitors and flat panel displays notebook computers video line protection & base stations hdsl, idsl secondary ic side protection microcontroller input protection lcd and camera modules 10/100/1000 ethernet 1 6 (sot23 -6l) 6v8u yww order information 3 3 d u w 1 x p e h u 3 d u w 1 x p e h u 6 k l s s l q j ESDA6V8UF-6/tr sot23-6 3000tape&reel 1 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
absolute max ratings (t amb =25 c ) rating symbol value units peak pulse power(tp = 8/20s) p pp 75 w esd per iec 61000-4-2 (air) esd per iec 61000-4-2 (contact) vpp +/-15 +/-8 kv maximum lead temperature for soldering during 10s t l 260 e c storage temperature range t stg -55 to +125 e c operating temperature range t op -55 to +125 e c electrical parameter uni ? directional tvs i pp i f v i i r i t v rwm v c v br v f 100 90 80 70 60 50 40 30 20 10 0 02 04 06 08 0 t, time ( s) % of peak pulse current t p t r pulse width (t p ) is defined as that point where the peak current decay = 8 s peak value i rsm @ 8 s figure 1 . 8 x 20 s pulse waveform half v alue rs /2 @ 20 s i m symbol parameter i pp maximum reverse peak pulse current v c clamping voltage @ i pp v rwm working peak reverse voltage i r maximum reverse leakage current @ v rwm i t test current v br breakdown voltage @ i t i f forward current v f forward voltage @ i f ESDA6V8UF 2 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
electrical characteristics (t=25 o c, device for 5.0v reverse stand-off voltage) conditions minimum typical maximum unit i r v rwm =5v, pin5 to 2 5 ua v f i f = 10ma 0.4 0.8 1.5 v v br ,i t =1ma, pin5 to 2 6.0 7.0 v v c i pp =1a, tp = 8/20us, note 1&2 any i/o pin to ground 12.0 v v r = 0v, f = 1mhz any i/o pin to ground 1. 2 1.5 pf c j v r = 0v, f = 1mhz between i/o pins 0.7 pf note 1: these parameters guaranteed by design and characterization. note 2: these measurements performed with no external capacitor on pin5. typical characteristics ESDA6V8UF 3 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
a pplications information device connection options for protection of four h igh-speed data lines this device is designed to protect data lines by clamping them to a fixed reference. when the voltage on the protected line exceeds the reference voltage the steering diodes are forward biased, conducting the transient current away from the sensitive circuitry. data lines are connected at pins 1, 3, 4 and 6. pin 2 should be connected directly to a ground plane. the path length is kept as short as possible to minimize parasitic inductance. the positive reference is connected at pin 5. the options for connecting the positive reference are as follows: 1. to protect data lines and the power line, connect pin 5 directly to the positive supply rail (vcc). in this configuration the data lines are referenced to the supply voltage. the internal tvs diode prevents over-voltage on the supply rail. 2. in applications where the supply rail does not exit the system, the internal tvs may be used as the reference. in this case, pin 5 is not connected. the steering diodes will begin to conduct when the voltage on the protected line exceeds the working voltage of the tvs (plus one diode drop). 3. in applications where complete supply isolation is desired, the internal tvs is again used as the reference and vcc is connected to one of the i/o inputs. an example of this configuration is the protection of a sim port. the clock, reset, i/o, and vcc lines are connected at pins 1, 3, 4, and 6. pin 2 is connected to ground and pin 5 is not connected. matte tin lead finish matte tin has become the industry standard lead-free replacement for snpb lead finishes. a matte tin finish is composed of 100 tin solder with large grains. since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the pcb, the reflow profile will be determined by the requirements of the solder paste. therefore, these devices are compatible with both lead-free and snpb assembly techniques. in addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint. data line and power supply protection using vcc as reference data line protection using internal tvs diode as reference ESDA6V8UF 4 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
package mechanical data outline drawing: land pattern: ESDA6V8UF 5 of 5 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
|
