View PS9123_7743410.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

31 fo 1 egap 00.1.ver 0010je0300sd80r aug 14, 2 01 2 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find wha t: " field. teehs atad PS9123 high cmr, 15 mbps totem pole output type, 5-pin sop (so-5) photocoupler description the ps9 12 3 is an optically c o up led high-spe ed, totem pol e out pu t isolator con taining a gaalas l ed on th e i np ut s ide and a pho tod iode and a si gna l pr oce ss ing c ircu it on the out pu t si de on one chip . the ps9 12 3 is spec ified h igh cmr , h igh ctr a nd pul se width distor ti on w it h ope rati ng temp erat ure. fe at ur es ? high common m od e tr an sient immun ity ( cm h , cm l = 20 kv/ s typ.) ? small package (so-5) ? pulse width dist ortio n ( | t phl ? t plh | = 4 ns typ .) ? h ig h-s pe ed (15 m bp s) ? h ig h isola tion volt age (b v = 3 750 v r. m.s.) ? to tem pole out pu t ? em bossed tape pr od uct : ps91 23-f3 : 2 500 pcs/ ree l ? pb -free pro duct ? safety standards ? ul appr ov ed: f il e no. e72 42 2 ? cs a ap pr ove d: no. ca 1 013 91 (ca5a, can /csa- c2 2.2 6 006 5, 6 095 0) ? di n en6 07 47-5-5 (vde088 4-5): 20 11 -11 ap prov ed no. 4 000 89 02 (op ti on) applications ? plc ? in vert er ? ac s ervo r08ds0030ej0100 rev.1.00 aug 14, 2012 1. anode 2. cathode 3. gnd 4. v o 5. v cc pin connection (top view) 5 3 1 2 4 truth table led output on l off h a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 2 of 13 aug 14, 2012 package dimensions (unit: mm) 1.27 0.4 +0.10 ?0.05 0.25 m 0.10.1 2.60.2 (4.4) *1 7.00.3 0.50.3 0.15 +0.10 ?0.05 3.4 +0.3 ?0.1 53 12 4 *1 ( ) indicates reference dimension. photocoupler construction parameter unit (min.) air distance 4.2 mm outer creepage distance 4.2 mm isolation distance 0.2 mm marking example no. 1 pin mark initial of renesas (engraved mark) rank code year assembled (last 1 digit) week assembled n 2 31 9123 n231 r *1 *1 bar : pb-free type number assembly lot ni/pd/au plating a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 3 of 13 aug 14, 2012 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 PS9123 PS9123-ax pb-free 20 pcs (tape 20 pcs cut) standard products PS9123 PS9123-f3 PS9123-f3-ax (ni/pd/au) embossed tape 2 500 pcs/reel (ul, csa approved) PS9123-v PS9123-v-ax 20 pcs (tape 20 pcs cut) din en60747-5-5 PS9123-v-f3 PS9123-v-f3-ax embossed tape 2 500 pcs/reel (vde0884-5): 2011-11 approved (option) note: ? 1. for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current ? 1 i f 20 ma reverse voltage v r 5 v detector supply voltage v cc 7 v output voltage v o 7 v high level output current i oh ? 5 ma low level output current i ol 13 ma power dissipation ? 2 p c 130 mw isolation voltage *3 bv 3 750 vr.m.s. operating ambient temperature t a ? 40 to +100 c storage temperature t stg ? 55 to +125 c notes: ? 1. reduced to 0.19 ma/ c at t a = 60 c or more. ? 2. t a = ? 40 to +100 c, applies to output pin v o and power supply pin v cc . reduced to 2.4 mw/ c at t a = 70 c or more. ? 3. ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-2 shorted together, 3-5 shorted together. recommended operating conditions parameter symbol min. typ. max. unit high level input current i fh 7.5 12.5 ma low level input voltage v fl 0 0.8 v supply voltage v cc 4.5 5.0 5.5 v ttl (loads) n 3 a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 4 of 13 aug 14, 2012 electrical characteristics (t a = ? 40 to +100 c, unless otherwise specified) parameter symbol conditions min. typ. ? 1 max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.3 1.55 1.8 v reverse current i r v r = 3 v, t a = 25 c 10 a terminal capacitance c t f = 1 mhz, v f = 0 v, t a = 25 c 30 pf detector high level output current i oh v cc = v o = 5.5 v, i f = 0 ma 0.05 100 a high level output voltage v oh v cc = 4.5 v, i f = 0 ma, i oh = ?2 ma 2.4 3.0 v low level output voltage v ol v cc = 4.5 v, i f = 7 ma, i ol = 8 ma 0.25 0.6 v high level supply current i cch v cc = 5.5 v, i f = 0 ma, v o = open 4 7 ma low level supply current i ccl v cc = 5.5 v, i f = 10 ma, v o = open 6 10 ma high level output short circuit current i osh v cc = 5.5 v, v o = gnd, i f = 0 ma, 10 ms or less ?43 ma low level output short circuit current i osl v cc = v o = 5.5 v, i f = 8 ma, 10 ms or less 28 ma coupled threshold input voltage (h l) i fhl v cc = 5 v, v o = 0.6 v 2.3 5 ma isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60%, t a = 25 c 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz, t a = 25 c 0.6 pf propagation delay time (h l) *2 t phl v cc = 5 v, i f = 7.5 ma 10 28 60 ns propagation delay time (l h) *2 t plh v cc = 5 v, i f = 7.5 ma 10 32 60 ns pulse width distortion (pwd) *2 ? t phl ?t plh ? v cc = 5 v, i f = 7.5 ma 4 30 ns common mode transient immunity at high level output *3 cm h v cc = 5 v, t a = 25 c, i f = 0 ma, v o (min.) = 2 v, v cm = 1 kv 15 20 kv/ s common mode transient immunity at low level output *3 cm l v cc = 5 v, t a = 25 c, i f = 7.5 ma, v o (max.) = 0.8 v, v cm = 1 kv 15 20 kv/ s a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 5 of 13 aug 14, 2012 notes: *1. typical values at t a = 25 c *2. test circuit for propagation delay time input output 1.5 v v oh v ol t phl t plh i f (on) 50% i f (on) c l includes probe and stray wiring capacitance. pulse input (i f ) v o (monitor) input (monitor) (pw = 500 ns, duty cycle = 1/2) 47 v cc = 5 v 0.1 f c l = 30 pf 2.5 k 1.3 k v cc = 5 v 1 2 3 4 5 *3. test circuit for common mode transient immunity 90% 10% 1 kv 0 v v oh 2 v 0.8 v v ol v cm v o (i f = 0 ma) v o (i f = 7.5 ma) t r t f c l includes probe and stray wiring capacitance. v o (monitor) v cc = 5 v 0.1 f c l = 15 pf i f v cm = 1 kv 1 2 3 4 5 sw ?+ a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 6 of 13 aug 14, 2012 typical characteristics (t a = 25 c, unless otherwise specified) 20 40 60 80 120 0 10 20 30 40 20 40 60 80 100 120 0 50 100 150 1.0 0.01 0.1 1 10 100 1.2 1.4 1.6 1.8 2.0 2.2 2.4 t a = +100?c +85?c +50?c +25?c 0?c ?40?c ?50 ?25 0 25 50 75 100 0 8 4 12 16 20 i ccl (i f = 10 ma) v cc = 5.5 v i cch (i f = 0 ma) ?50 ?25 0 25 50 75 100 0 2.0 1.0 3.0 4.0 5.0 v cc = 4.5 v, v f = 0.8 v, i oh = 2.0 ma 0 20 10 30 40 50 ?50 ?25 0 25 50 75 100 t plh t phl pwd i f = 7.5 ma v cc = 5.0 v 100 maximum forward current vs. ambient temperature maximum forward current i f (ma) ambient temperature t a (?c) forward current vs. forward voltage forward current i f (ma) forward voltage v f (v) high level output voltage vs. ambient temperature high level output voltage v oh (v) ambient temperature t a (?c) detector power dissipation vs. ambient temperature detector power dissipation p c (mw) ambient temperature t a (?c) supply current vs. ambient temperature high level supply current i cch (ma) low level supply current i ccl (ma) ambient temperature t a (?c) propagation delay time, pulse width distortion vs. ambient temperature propagation delay time t phl , t plh (ns), pulse width distortion t phl ? t plh (ns) ambient temperature t a (?c) remark the graphs indicate nominal characteristics. a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 7 of 13 aug 14, 2012 0 0.2 0.1 0.3 0.4 0.5 2.5 7.5 5 10 12.5 13 0 v cc = 5.0 v v cc = 4.5 v, i f = 5.0 ma 1 2 3 4 5 ?50 ?25 0 25 50 75 100 ?50 ?25 0 25 50 75 100 0 0.2 0.1 0.3 0.4 0.5 v cc = 4.5 v, i f = 7.5 ma, i ol = 8.0 ma ?1 ?2 ?3 ?4 ?5 0 2 1 3 4 5 v cc = 4.5 v, v f = 0.8 v ?30 ?25 ?20 ?15 ?10?50 2 1 3 4 v cc = 4.5 v, i f = 250 a 85?c 0 40 20 60 510152025 t a = 25?c, v cc = 5 v t phl t plh pwd low level output voltage vs. ambient temperature low level output voltage v ol (v) ambient temperature t a (?c) low level output voltage vs. low level output current low level output voltage v ol (v) low level output current i ol (ma) high level output voltage vs. high level output current high level output voltage v oh (v) threshold input current vs. ambient temperature threshold input current i fhl (ma) ambient temperature t a (?c) high level output voltage vs. high level output current high level output voltage v oh (v) high level output current i oh (ma) high level output current i oh (ma) propagation delay time, pulse width distortion vs. forward current propagation delay time t phl , t plh (ns), pulse width distortion t phl ? t plh (ns) forward current i f (ma) 85?c85?c t a = 100?c 85?c 0?c ?40?c 25?c t a = 100?c ?40?c 85?c 25?c 0?c t a = 100?c 85?c 0?c 25?c remark the graphs indicate nominal characteristics. a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 8 of 13 aug 14, 2012 taping specifications (unit: mm) outline and dimensions (tape) tape direction PS9123-f3 outline and dimensions (reel) packing: 2 500 pcs/reel 1001.0 13.00.2 3302.0 2.00.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 2.00.5 13.00.2 r 1.0 21.00.8 1.550.1 2.00.05 4.00.1 1.750.1 3.90.1 3.45 max. 7.40.1 0.3 0.05 8.00.1 1.5 +0.1 ?0 5.50.1 12.00.2 3.00.1 a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 9 of 13 aug 14, 2012 recommended mount pad dimensions (unit: mm) d b1 b2 a PS9123 part number ab1 c d b2 6.25 1.27 2.54 0.8 1.45 c a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 10 of 13 aug 14, 2012 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temper ature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) 12030 s (preheating) 220?c 180?c package surface temperature t (?c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260?c max. 120?c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pin) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler?s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 11 of 13 aug 14, 2012 usage cautions 1. this product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of 0.1 f or more is used between v cc and gnd near device. also , ensure that the distance between the leads of the photocoupler and capacitor is 10 mm or less. 3. avoid storage at a high temperature and high humidity. a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 12 of 13 aug 14, 2012 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068- 1/din en 60068-1) 40/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.6 u iorm , p d < 5 pc u iorm u pr 707 1 131 v peak v peak test voltage (partial discharge test, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 326 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (i ec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664 -1 vde0110 part 1) iii a storage temperature range t stg ?55 to +125 c operating temperature range t a ?40 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum pe rmissible in case of fault, see thermal derating curve) package temperature current (input current i f , p si = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 200 300 10 9 c ma mw a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
PS9123 e r08ds0030ej0100 rev.1.00 page 13 of 13 aug 14, 2012 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth. a b usine ss par tn er o f ren esas ele ctro nics c or pora ti on.
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history PS9123 data sheet description rev. date page summary 0.01 jan 29, 2011 ? first edition issued throughout ?preliminary data sheet? is changed to ?data sheet.? p.1 modification of features p.2 modification of package dimensions modification of photocoupler construction modification of marking example p.3 addition of ordering information modification of absolute maximum ratings modification of recommend ed operating conditions pp.4, 5 modification of electrical characteristics pp.6, 7 addition of typical characteristics p.8 addition of tapi ng specifications p.9 addition of recommended mount pad dimensions aug 14, 2012 pp.10, 11 addition of notes on handling 1.00 p.12 addition of specification of vde marks license document

▲Up To Search▲

Price & Availability of PS9123

	To Download PS9123 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .