? rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2067B-042905 preliminary for prototype or pre-production sample please contact rfm sales. notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demo nstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depende nt on pcb layout and external impedance matching design. see application note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. tape and reel standard per ansi / eia 481. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may va ry between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 9. ?copyright 1999, rf monolithics inc. 10. electrostatic sensitive device. observe precautions for handling. electrical characteristics characteristic sym notes min typ max units nominal frequency f n 1 172.8 mhz minimum insertion attenuation a min 10.6 12.5 db amplitude ripple (p-p) f n 4.42 mhz da 1 0.8 1.5 group delay ripple (p-p) f n 4.42 mhz dt 1 70 200 ns group delay @ f n t 780 1000 vswr f n 4.42 mhz 1.3:1 phase ripple (p-p) f n 4.42 mhz djt 10 pass bandwidth a rel 1.5 db b 1.5db 8.84 9.2 mhz adjacent channel selectivity acs 17 22 db relative attenuation (relative to a min ) f n 8.0 to f n 11.0 mhz a rel 27 32 db f n 11 to f n 25.0 mhz 35 45 db f n 25 to f n 36.8 mhz 45 60 db f n 36.8 to f n 100.0 mhz 55 70 db operating temperature range t a 1 -40 +85 c case style 5 smp-03 7 x 5 mm nominal footprint lid symbolization (yy=year, ww=week, s=shift) see note 4 rfm SF2067B yywws smp-03 ? low insertion loss ? 5.0 x 7.0 mm surface-mount case ? 50 w w single ended input 200 w w balanced output ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c max soldering temperature 265c for 10 s 172.8 mhz saw filter SF2067B connection terminals port 1 hot 10 port 1 ground return 1 port 2 hot 5 port 2 hot 6 case ground all others electrical connections pb free datasheet http://www.datasheetlist.com/
172.8 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2067B-042905 ch1 s21 del 20 ns/ ref 720 ns ch1 center 172 . 800 000 mhz span 9 . 000 000 mhz SF2067B 1 db bw and gdd c smo prm ch2 s21 log 10 db/ ref -11.93 db ch2 center 172 . 800 000 mhz span 60 . 000 000 mhz cor prm 20 apr 2005 14:02:32 1 2 3 3 : -24 . 781 ns 8 . 840 000 mhz ref=2 ch1 markers mean : 715 . 30 ns s . dev : 7 . 8012 ns p-p : 48 . 955 ns 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz max ref=1 ch2 markers bw : 9 . 007195 mhz cent : 173 . 060150 mhz q : 19 . 214 1_ loss : -11 . 896 db ch1 s21 log 10 db/ ref -12.17 db center 172 . 800 000 mhz span 60 . 000 000 mhz SF2067B rejection cor prm 20 apr 2005 14:25:32 1 2 3 4 1 : . 00500 db 0 . 000 000 mhz max ref= ch1 markers bw : 9 . 010059 mhz cent : 173 . 060621 mhz q : 19 . 207 1_ loss : -11 . 901 db ch1 pass free datasheet http://www.datasheetlist.com/
172.8 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2067B-042905 free datasheet http://www.datasheetlist.com/
172.8 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2067B-042905 free datasheet http://www.datasheetlist.com/
172.8 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2067B-042905 smp-03 case recommended pcb footprint case dimensions dimension mm inches min nom max min nom max a 6.80 7.00 7.20 0.268 0.276 0.283 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.50 1.65 2.00 0.059 0.065 0.079 d .47 0.60 .73 0.019 0.024 0.029 e 2.41 2.54 2.67 0.095 0.100 0.105 h 0.87 1.0 1.13 0.034 0.039 0.044 j 4.87 5.00 5.13 0.192 0.197 0.202 k 2.87 3.00 3.13 0.113 0.118 0.123 p 1.14 1.27 1.40 0.045 0.050 0.055 materials solder pad termination au plating 30 - 60 inches (76.2-152 m) over 80- 200 inches (203-508 m) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 inches thick body al 2 o 3 ceramic pb free electricalconnections connection terminals port 1 input or return 10 return or input 1 port 2 output or return 5 return or output 6 ground all others single ended operation return is ground differential operation return is hot a b c h e p d h j k 10-terminal ceramic surface-mount case 7 x 5 mm nominal footprint free datasheet http://www.datasheetlist.com/
172.8 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 6 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2067B-042905 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 500 13 330 2000 user direction of feed component orientation and dimensions carrier tape dimensions ao 5.5 mm bo 7.5 mm ko 2.0 mm pitch 8.0 mm w 16.0 mm pin #1 see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref. 16.0 free datasheet http://www.datasheetlist.com/
|
