dta024x series pnp -100ma -50v digital transistors (bias resistor built-in transistors) datasheet l l outline parameter value vmt3 emt3f v cc -50 v i c(max.) -100 ma r 1 22 k dta024xm DTA024XEB r 2 47 k (sc-105aa) (sc-89) umt3f l l features 1) built-in biasing resistors, r 1 = 22k , r 2 = 47k 2) built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit) . 3) the bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. they also have the advantage of completely eliminating parasitic effects. 4) only the on/off conditions need to be set for operation, making the circuit design easy. 5) complementary npn types: dtc024x series 6) lead free/rohs compliant. dta024xub (sc-85) l l inner circuit l l application switching circuit, inverter circuit, interface circuit, driver circuit l l packaging specifications part no. package package size taping code reel size (mm) tape width (mm) basic ordering unit.(pcs) marking dta024xm vmt3 1212 t2l 180 8 8000 59 DTA024XEB emt3f 1616 tl 180 8 3000 59 dta024xub umt3f 2021 tl 180 8 3000 59 www.rohm.com ? 2013 rohm co., ltd. all rights reserved. 1/7 20130828 - rev. 002
dta024x series datasheet absolute maximum ratings (t a = 25c) parameter symbol values unit supply voltage v cc -50 v input voltage v in -40 to 7 v output current i o -50 ma collector current i c(max) *1 -100 ma power dissipation dta024xm p d *2 150 mw DTA024XEB 150 dta024xub 200 junction temperature t j 150 range of storage temperature t stg -55 to + 150 electrical characteristics (t a = 25c) parameter symbol conditions values unit min. typ. max. input voltage v i(off) v cc = -5 v, i o = -100 a - - -0.5 v v i(on) v o = -0.3 v, i o = -5 ma -2.5 - - output voltage v o(on) i o / i i = -5 ma / -0.5 ma - -0.07 -0.15 v input current i i v i = -5 v - - -0.36 ma output current i o(off) v cc = -50 v, v i = 0 v - - -500 na dc current gain g i v o = -10 v, i o = -5 ma 80 - - - input resistance r 1 - 15.4 22 28.6 k resistance ratio r 2 /r 1 - 1.7 2.1 2.6 - transition frequency f t *1 v ce = -10 v, i e = 5 ma, f = 100 mhz - 250 - mhz *1 characteristics of built-in transistor *2 each terminal mounted on a reference footprint www.rohm.com ? 2013 rohm co., ltd. all rights reserved. 2/7 20130828 - rev. 002
dta024x series datasheet electrical characteristic curves (t a =25c) fig.1 input voltage vs. output current (on characteristics) fig.2 output current vs. input voltage (off characteristics) fig.3 output current vs. output voltage fig.4 dc current gain vs. output current www.rohm.com ? 2013 rohm co., ltd. all rights reserved. 3/7 20130828 - rev. 002
|