mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. the m611x series is ideally suited for a wide range of applications such as gps, military, avionics, test and measurement, wlan, wimax base stations (see fig 2.), point to point/multi-point radios, medical equipment, frequency synthesis, fre - quency translation and land mobile radio. standard output for the m611x series is hcmos compatible or clipped sinewave and draws as little as 1.5 ma with a 3.3 volt supply at 13 mhz. this low power consumption provides an advantage over similarly specifed ovenized oscillators for power-sensitive applications. the m611x series offers 9.2 ppm minimum pull range with excellent tuning linearity performance for critical pll applications. this series is available in frequencies from 8 to 52 mhz, and is offered in a ceramic surface mount platform with industry standard 5 x 7 mm footprint. product features product description product applications product ordering information m611x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvtcxo tight stability (0.3 ppm) over wide industrial ? temperature range (-40 c to +85 c) 3.0 v, 3.3 v and 5.0 v versions ? wide frequency range 8-52 mhz ? low phase noise ? excellent g-sensitivity performance: 1.5 ppb/g ? tri-state function ? m6110sxxx, m6111sxxx & m6112sxxx - contact factory for datasheets. mtronptis m611x series tcxos and tcvcxos provide design engineers with low voltage, surface mount products with extremely tight stability (to 0.3 ppm) over temperature and time. specially processed crystals enable the m61 1x to achieve consistent long-term stability and minimal frequency shift after refow . our processing also enables us to achieve excellent g-sensitivity (1.5 ppb/g). the low phase noise (-155 dbc/hz at 100 khz) makes the m611x ideal for those design engineers working on all types of systems as the reference timing source.
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 2 mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. performance characteristics m611x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvtcxo
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 3 phase noise plot m611x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvtcxo output waveform
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 4 mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. product dimension & pinout information m611x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvtcxo part markings: line 1: indicates part family, year, month of production line 2: indicates frequency
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 5 handling information quality parameters part marking guide m611x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvtcxo although protection circuitry has been designed into the m611x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (esd) during handling and mounting. mtronpti utilizes a human-body model (hbm) and a charged-device model (cdm) for esd-susceptibility testing and protection design evaluation. esd voltage thresholds are dependent on the circuit parameters used to defne the mode. although no industry- wide standard has been adopted for the cdm, a standard hbm (resistance = 1500 ? , capacitance = 100 pf) is widely used and therefore can be used for comparison purposes. the hbm esd threshold presented here was obtained using these circuit parameters. line 1: indicates part family, year, month of production line 2: indicates frequency
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 6 maximum soldering conditions tape & reel specifcations (all measurements are in mm) a b c d e f g h j k l m n m611x 5.40 7.40 1.55 7.50 2.60 2.00 4.00 16.00 330 13.00 20.20 100 16.40 solder conditions note: exceeding these limits may damage the device. m611x series 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvtcxo standard tape and reel: 1000 parts per reel
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 7 date revision pcn number details of revision for custom products or additional specifcations contact our sales team at 800.762.8800 (toll free) or 605.665.9321 for more information on this product visit the mtronpti website at www.mtronpti.com roct eiion le picl et ircit 611 erie 5 7 mm 3.0 3.3 5.0 olt or lippe inewe reciion o ircit load circuit #2 - hcmos load circuit #7 - clipped sinewave tcxo/tcvcxo
|
