www.pairuigroup.com page: 1/5 date: 12/13/2013 dc-dc converter sip-package DAE-2 series, 2watt, 1kvdc, unregulated features: 3 years warranty 1000vdc isolation voltage single, dual, isolated twin output models operating temperature range -40c to +85c model input voltage (vdc) output voltage (vdc) output current (ma) efficiency typ. min. max. dae2-0511 5(4.5~5.5) 5 40 400 80% dae2-0512 9 22 220 80% dae2-0513 12 16.6 166 80% dae2-0514 15 13.6 136 80% dae2-0515 24 8.4 84 80% dae2-0521 5 20 200 80% dae2-0522 9 11 110 80% dae2-0523 12 8 80 80% dae2-0524 15 6.8 68 80% dae2-0525 24 4.2 42 80% dae2-0501 5, 5 20 200 80% dae2-0502 9, 9 11 110 80% dae2-0503 12, 12 8 80 80% dae2-0504 15, 15 6.8 68 80% dae2-0505 24, 24 4.2 42 80% dae2-1211 12(10.8~13.2) 5 40 400 80% dae2-1212 9 22 220 80% dae2-1213 12 16.6 166 80% dae2-1214 15 13.6 136 80% dae2-1215 24 8.4 84 80% dae2-1221 5 20 200 80% dae2-1222 9 11 110 80% dae2-1223 12 8 80 80% dae2-1224 15 6.8 68 80% dae2-1225 24 4.2 42 80% dae2-1201 5, 5 20 200 80% dae2-1202 9, 9 11 110 80% dae2-1203 12, 12 8 80 80%
www.pairuigroup.com page: 2/5 date: 12/13/2013 dc-dc converter sip-package DAE-2 series, 2watt, 1kvdc, unregulated model input voltage (vdc) output voltage (vdc) output current (ma) efficiency typ. min. max. dae2-1204 12(10.8~13.2) 15, 15 6.8 68 80% dae2-1205 24, 24 4.2 42 80% dae2-2411 24(21.6~26.4) 5 40 400 80% dae2-2412 9 22 220 80% dae2-2413 12 16.6 166 80% dae2-2414 15 13.6 136 80% dae2-2415 24 8.4 84 80% dae2-2421 5 20 200 80% dae2-2422 9 11 110 80% dae2-2423 12 8 80 80% dae2-2424 15 6.8 68 80% dae2-2425 24 4.2 42 80% dae2-2401 5, 5 20 200 80% dae2-2402 9, 9 11 110 80% dae2-2403 12, 12 8 80 80% dae2-2404 15, 15 6.8 68 80% dae2-2405 24, 24 4.2 42 80% notes: other input and output models may available on reques t. electrical line regulation --- 1.2% load regulation 10% ~ 100% full load 15% max. ripple and noise --- 100mvp-p max. isolation voltage --- 1000vdc operating temperature range --- -40c to +85c mtbf --- 3.5x10 6 hrs notes: all the data in this article are under test with ta+25 c, humidity<75%, rated input and rated load mode.
www.pairuigroup.com page: 3/5 date: 12/13/2013 dc-dc converter sip-package DAE-2 series, 2watt, 1kvdc, unregulated mechanical single output connection pin # single dual isolate d twin 1 +vin +vin +vin 2 gnd gnd gnd 4 -vo -vo -vo1 5 no pin com +vo1 6 +vo +vo -vo2 7 no pin no pin +vo2 dual output note: * unit is mm(inch). isolated twin output
www.pairuigroup.com page: 4/5 date: 12/13/2013 dc-dc converter sip-package DAE-2 series, 2watt, 1kvdc, unregulated temperature profile capacitive loads selection vin (vdc) cin (f) single output voltage (vdc) cout (f) dual output voltage (vdc) cout (f) 5 4.7 5 10 5 4.7 12 2.2 9 4.7 9 2.2 24 1 12 2.2 12 1 - - 15/24 1 15 0.47
www.pairuigroup.com page: 5/5 date: 12/13/2013 dc-dc converter sip-package DAE-2 series, 2watt, 1kvdc, unregulated notes recommended test and application circuit in order to ensure the efficiency and dependability of the mo dule, the minimum specified load must be less than 10% of rated load. if the output power is low, we recommend to add an e xternal 10% loading resistor in parallel. fuse: depends on the actual input current; tvs: depends on the actual input voltage; recommended capacitor:c1, c2, c5, c8 ,about 0.1uf; for c6,c 7,c9, please check the capacitive load; c3,c4:2kv/1nf.
|