3 polyimide film tape 5413 product description a tape consisting of a kapton polyimide film and silicone adhesive designed for high temperature applications. typical physical properties and performance characteristics general information ? at room temperature, the properties of kapton and polyimide polyester films are similar. however, as the temperature increases or decreases, the properties of the kapton film are less affected than polyester. kapton film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures. technical data june, 1995 note: the following technical information and data should be considered representative or typical only and should not be used for specification purposes. astm test method adhesion to steel: 22 oz./in. width (24 n/100 mm) d-3330 tensile strength at break: 33 lbs./in. width (578 n/100 mm) d-3759 elongation at break: 62% d-3759 backing thickness: 1 mil (.03 mm) d-3652 total tape thickness: 2.7 mils (.07 mm) d-3652 temperature use range: -100? to +500? (-73? to 260?) construction backing adhesive liner color standard roll length kapton polyimide silicone none amber 36 yds. (33 m) film
3 industrial tape and specialties division 3m center, building 220-7e-01 st. paul, mn 55144-1000 kapton is a registered trademark of e.i. dupont de nemours co. printed in u.s.a. ?m 1994 70-0703-2532-2 recycled paper 40% pre-consumer 10% post-consumer application ideas mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process. release surface in fabrication of parts cured at elevated temperatures features thin kapton polyimide film silicone adhesive high adhesive to film bond advantages dimensionally stable at high temperatures flame retardant, chemical and radiation resistant high temperature performance reduces adhesive transfer reduces adhesive transfer benefits no rework - high productivity protects surfaces, helping reduce replacement costs no cleaning required - helps increase productivity no cleaning required - helps increase productivity polyimide film tape 5413 to request additional product information or to arrange for sales assistance, call toll free 1-800-227-5085. address correspondence to: 3 m industrial tape and specialties division, 3 m center, building 220-8e-04, st. paul, mn 55144-1000. our fax number is 612-733-9175. in canada, phone: 1-519-451-2500. in puerto rico, phone: 1-809-750-3000. in mexico, phone: 5-728-0400. for additional information 3 m makes no warranties, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. user is responsible for determining whether the 3 m product is fit for a particular purpose and suitable for user s method of application. please remember that many factors can affect the use and performance of a 3 m itsd product in a particular application. the materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3 m itsd product. given the variety of factors that can affect the use and performance of a 3 m itsd product, some of which are uniquely within the user s knowledge and control, it is essential that the user evaluate the 3 m itsd product to determine whether it is fit for a particular purpose and suitable for the user s method of application. important notice if the 3 m product is proved to be defective, the exclusive remedy, at 3 m? option, shall be to refund the purchase price of or to repair or replace the defective 3 m product. 3 m shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or strict liability. limitation of remedies and liability this industrial tape and specialties division product was manufactured under a 3 m quality system registered to iso 9002 standards. iso 9002
|
