wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 1 of 5 datasheet rev. e psge25 series 88~264vac (125~373vdc) input voltage range single outputs up to 27.4 watts output power ac/dc switching power supplies features ? single outputs ? rohs compliant ? universal ac input / full range ? high efficiency, long life, and high reliability ? 10% output voltage adjustability ? green design, no-load power consumption < 0.5w ? energy star compliant ? power on with led indicator ? all using 105c long life electrolytic capacitors ? high operating temperature: -25c to +70c ? 100% full load burn-in tested ? withstand 5g vibration test ? brown-out (low ac input voltage) protection ? over voltage, over load, and short circuit protection description the psge25 series of ac/dc switching power supplies offers up to 27.4 watts of output power in a 3.10? x 2.03? x 1.11? enclosed case. this series has a universal input voltage range of 88~264vac (125~373vdc) and single outputs of 3.3, 5, 12, 15, 24, and 48vdc. some features include high e fficiency up to 88%, 10% output adjustability, no-load power consumption < 0.5w, and a high operating temperature range of -25c to +70c. this series also has over voltage, short circuit, over load, and brown-out (low ac input voltage) protection. all models have been 100% full load burn-in tested and are rohs and energy star compliant. this series also has ul 60950-1, tuv en60950-1, and ce safety approvals.
rev. e psge25series single outputs up to 27.4 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 2 of 5 specifications: psge25 series all specifications are based on 25c, nominal input volta ge, and maximum output current unless otherwise noted. we reserve the right to change specifi cations based on technological advances. specification test conditions min nom max unit input specif ications 88 264 vac operating voltage range withstand 300vac surge for 5 seconds without damage 125 373 vdc input frequency 50/60 hz full load and 115vac 0.7 input current full load and 230vac 0.35 a inrush current full load, 25c, cold start, vin = 230vac 30 a no load power consumption no load and 230vac 0.5 w output specifications output voltage see table 3.3vdc model -3 +3 5vdc model -2 +2 voltage tolerance 12~48vdc models includes set up tolerance, line regulation, and load regulation -1 +1 % output voltage adjustability -10 +10 % line regulation measured from low line to high line at full load 0.5 % load regulation measured from 0% to 100% full load see table output power see table output current see table ripple & noise measured at 20mhz bandwidth an d using a 12" twisted pair-wire terminated with a 0.1f capacitor and a 47f capacitor in parallel. see table full load and 115vac 10 hold-up time full load and 230vac 32 ms full load and 115vac 1000 setup time full load and 230vac measured at first cold start; turning the power supply on and off very quickly may lead to an increase in the setup time. 800 ms full load and 115vac 80 rise time full load and 230vac 80 ms temperature coefficient 0 ~ 50c -0.03 +0.03 %/c protection over voltage protection latch-off mode 115 150 %vo over load protection hiccup mode; auto-recovery after fault condition is removed 110 % short circuit protection yes brown-out protection (low ac i/p voltage) yes general specifications efficiency see table input to output 3000vac (4242vdc) input to fg 1500vac (2121vdc) withstand voltage output to fg for 1 minute 500vac (707vdc) input to output 100 input to fg 100 isolation resistance output to fg test voltage = 500vdc 100 m ? leakage current 240vac 2 ma environmental specifications operating temperature (see derating curve) derate linearly from 100% load at 50c to 50% load at 70c -25 +70 c storage temperature -40 +85 c operating humidity non-condensing 10 90 % rh storage humidity 0 95 % rh vibration 10~500hz, 5g 10min/1cycle, peri od for 60 minutes each along x,y,z axes cooling free air convection mtbf (see page 3) calculated per mil-hdbk-217f 620,300 hours physical specifications weight approx. 6.35oz (180g) dimensions (l x w x h) 3.10 x 2.03 x 1.11 inches (78.50 x 51.50 x 28.25 mm) safety & emc (the power supply is considered a componen t which will be installed into final equipment. the final equipment must be re-confir med that it still meets emc directives) safety standards ul60950-1, 2 nd edition, tuv en60950-1: 2006+a11 approved emi conduction & radiation en55022: 1998+a1: 2000+a2: 2003 class b harmonic current en61000-3-2: 2000+a2: 2005 class a, en61000-3-3: 1995+a1: 2001 ems immunity en61204-3: 2000, en55024: 1998+a1: 2001+a2: 2003 light industry level, criteria a
rev. e psge25series single outputs up to 27.4 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 3 of 5 model selection table model number input voltage output voltage output current load (2) regulation ripple & noise (1) output power efficiency psge-25-3.3 3.3 vdc 6a 2.0% 100mvp-p 19.8w 74% psge-25-5 5 vdc 5a 1.0% 100mvp-p 25w 83% psge-25-12 12 vdc 2.1a 0.5% 120mvp-p 25.2w 85% PSGE-25-15 15 vdc 1.7a 0.5% 120mvp-p 25.5w 86% psge-25-24 24 vdc 1.1a 0.5% 120mvp-p 26.4w 87% psge-25-48 88 ~264 vac (125~373 vdc) 48 vdc 0.57a 0.5% 200mvp-p 27.36w 88% notes 1. ripple & noise is measured at 20mhz bw and using 12" twisted pair-wire terminated with 0.1f and 47f capacitors in parallel . 2. load regulation is measured from 0% to 100% full load. characteristics -25 ambient temperature (c) 0 10203040506070 20 40 60 80 100 load (%) load vs temperature 90 ta=25c 100 110 120 264 40 50 60 70 80 load (%) input voltage (vac) 90 100 load vs input voltage mtbf calculation for psge-25-5 model mtbf ( p) total of all components no. part value formula p mil spec type 1.1 opto-ic p = b t q e 0.942481 6-11 electronics, dete ctors, isolators, emitters 1.2 fuse p = b e 0.01 22-1 fuses 1.4 transformers p = b t q e 0.109574 11-1 inductive devices, transformers 1.5 fixed coil p = b t q e 0.001487627 11-2 inductive devices, coils 1.6 pcb p = b e 0.00044 17-1 connections 1.7 connectors p = b t k q e 0.002013724 15-1 connectors, general 1.9 solder p = b (n1 c+n2 ( c+13)) q e 0.020638 16-1 interconnection assemblies with plated through holes 2.0 ic p = (c1 t+c2 e) q l 0.384000 5-1 microcircuits, gate/logic arrays and microprocessors 2.1 transistors p = b t a q e 0.107511 6-4 transistors, low frequency, si fet 2.2 diodes p = b t s c q e 0.060138 6-1 diodes, low frequency 2.3 capacitors p = b t c v q e 0.238539 10-1 capacitors 2.4 resistors p = b t p s q e 0.121931 9-1 resistors p total of all components 1.998753415 failures/10 6 hours mtbf 1 / p (total of all components) 500311.8407 hours
rev. e psge25series single outputs up to 27.4 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 4 of 5 mechanical drawings unit: inches (mm) 2.02 (51.25) 0.04 (1.00) m3taping ?0.18 (?4.50) 0.10 (2.50) 0.22 (5.50) 0.16 (4.00) 0.60 (15.00) 0.08 (2.00) 1.11 (28.25) 0.05 (1.20) 0.12 (3.00) 0.10 (2.50) 0.22 (5.50) 3.10 (78.25) 0.45 (11.50) 0.22 (5.50) 0.35 (9.00) 0.26 (6.50) 0.35 (9.00) 0.49 (12.50) 0.30 (7.50) 0.28 (7.00) 0.28 (7.00) 1.14 (29.00) 0.05 (1.20) r0.06 (r1.50) top of case unit: inches (mm) bottom of case 4-m3 taping m3x4l 2.00 (50.75) 0.98 (25.00) 2.10 (53.40) 0.47 (12.06) 0.39 (10.00) 0.12 (3.00) ?0.22 (?5.50) 0.98 (25.00) 0.77 (19.5) 0.07 (1.70) 0.05 (1.20) 0.28 (7.00) 0.09 (2.20) 1.17 (29.70) 0.02 (0.50) 0.10 (2.50) 0.12 (3.00) 0.12 (3.00) 0.14 (3.50) 0.26 (6.70) 0.07 (1.70) 1.09 (27.75) 0.55 (14.00) 2-?0.13 (?3.20) 2.62 (66.50) 0.20 (5.00) 0.02 (0.50) 0.47 3.08 (78.25) 0.36 (9.25) 2-?0.26 (?6.50) 0.26 (6.50) (12.00) 0.47 (12.00) 0.47 (12.00) 0.48 (12.30) 0.12 (3.00) 0.07 (1.70) 0.55 (14.00) 0.58 (14.70) 0.83 (21.00) 0.85 (21.55) 0.90 (22.75) 1.11 (28.25) tolerance: 0.02? (0.5mm) tolerance: 0.02? (0.5mm)
rev. e psge25series single outputs up to 27.4 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 01/08/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 5 of 5 mechanical drawing 0.26 (6.72) 2.10 (53.40) 0.48 (12.30) 0.30 (7.62) 2-m3 l=4 1.01 (25.75) 2.03 (51.50) l n -v +v unit: inches (mm) 2-m3 l=5 3.10 (78.50) 2.62 (66.50) 0.10 (2.50) 1.11 (28.25) 0.55 (14.00) 0.47 (12.00) 0.47 (12.00) tolerance: 0.02? (0.5mm) company information wall industries, inc. has created custom and modified units for over 50 years. our in-house research and development engineers will provide a solution that exceeds your perfo rmance requirements on-time and on budget. our iso9001-2008 certification is just one example of our commitment to produc ing a high quality, well-documented product for our customers. our past projects demonstrate our commitment to you, our cu stomer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and f unction requirements. we will continue to provide ongoing support for your project a bove and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone : ? (603)778-2300 toll free : ? (888)587-9255 fax : ? (603)778-9797 e-mail : sales@wallindustries.com web : www.wallindustries.com address : 5 watson brook rd. exeter, nh 03833
|
