View 2N5153RHRG_8281455.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. march 2014 docid15386 rev 5 1/17 2n5153hr hi-rel pnp bipolar transistor 80 v - 5 a datasheet - production data figure 1. internal schematic diagram features ? hi-rel pnp bipolar transistor ? linear gain characteristics ? escc qualified ? european preferred part list - eppl ? radiation level: lot specific total dose contact marketing for specified level description the 2n5153hr is a silicon planar epitaxial pnp transistor in to-39, to-257 and smd.5 packages. it is specifically designed for aerospace hi-rel applications and escc qualified according to the 5204-002 specification. in case of conflict between this datasheet and escc detailed specification, the latter prevails. to-39 to-257 smd.5 3 2 1 1 2 3 bv ceo 80 v i c (max) 5 a h fe at 10 v - 150 ma > 70 operating temperature range -65c to +200c table 1. device summary device qualification system agency specification package other features eppl 2n5153rshrg escc 5204/002 smd.5 emitter on pin 1 - 100 krad: escc ldr yes 2n5153shrg escc 5204/002 smd.5 emitter on pin 1 yes 2n5153rhrx escc 5204/002 to-39 100 krad: escc ldr - 2n5153hrx escc 5204/002 to-39 - - 2n5153resyhrx escc 5204/002 to-257 100 krad : escc ldr - 2n5153esyhrx escc 5204/002 to-257 - - www.st.com
contents 2n5153hr 2/17 docid15386 rev 5 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 radiation hardness assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.1 to-257 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 to-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 4.3 smd.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6.1 date code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6.2 documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
docid15386 rev 5 3/17 2n5153hr electrical ratings 17 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v cbo collector-base voltage (i e = 0) -100 v v ceo collector-emitter voltage (i b = 0) -80 v v ebo emitter-base voltage (i c = 0) -5.5 v i c collector current -5 a p tot total dissipation at t amb 25 c for to-39 for to-257 t c 25 c for to-39 for to-257 for smd.5 1 3.3 10 35 35 w w w w w tstg storage temperature -65 to 200 c tj max. operating junction temperature 200 c table 3. thermal data for through-hole packages symbol parameter to-39 to-257 unit r thjc r thja thermal resistance junction-case __ max thermal resistance junction-ambient __ max 17.5 175 5 53 c/w c/w table 4. thermal data for smd package symbol parameter smd.5 unit r thjc thermal resistance junction-case __ max 5 c/w
electrical characteristics 2n5153hr 4/17 docid15386 rev 5 2 electrical characteristics t case = 25 c unless otherwise specified table 5. electrical characteristics symbol parameter test conditions min. typ. max. unit i ces collector cut-off current (i e = 0) v cb = - 60 v v cb = - 60 v t amb = 150 c -1 -10 a a i ebo emitter cut-off current (i c = 0) v eb = - 4 v v eb = - 5.5 v -1 -1 a ma i ceo collector cut-off current (i b = 0) v ce = - 40 v -50 a v (br)ceo (1) 1. pulsed duration = 300 s, duty cycle 1.5% collector-emitter breakdown voltage (i b = 0) i c = - 100 ma -80 v v ce(sat) (1) collector-emitter saturation voltage i c = - 5 a i b = - 0.5 a -1.5 v v be(sat) (1) base-emitter saturation voltage i c = - 2.5 a i b = - 0.25 a i c = - 5 a i b = - 0.5 a -1.45 -2.2 v v h fe (1) dc current gain i c = - 50 ma v ce = - 5 v i c = - 2.5 a v ce = - 5 v i c = - 5 a v ce = - 5 v i c = - 2.5 a v ce = - 5 v t amb = - 55 c 50 70 40 35 200 h fe ac forward current transfer ratio v ce = - 5 v i c = - 500 ma f = 20 mhz 3.5 c obo output capacitance i e = 0 v cb = - 10 v f = 1 mhz 250 pf t on turn-on time v cc = - 30 v v bb = - 4 v v in - 51 v i c = 5 a i b1 = - i b2 = - 0.5 a 0.5 s t off turn-off time v cc = - 30 v v bb = - 4 v v in - 51 v i c = - 5 a i b1 = - i b2 = - 0.5 a 1.3 s
docid15386 rev 5 5/17 2n5153hr electrical characteristics 17 2.1 electrical characteristics (curves) figure 2. h fe @v ce = 5 v figure 3. v cesat @ h fe = 10 figure 4. v besat @ h fe = 10 figure 5. v beon @ v ce = 5 v am12794v1 ic (a) 0.01 0.1 1 10 10 100 1e3 -55c 25c 125c am12795v1 0.01 0.1 1 10 0.01 0.1 1 -55c 25c 125c ic (a) am12796v1 ic (a) 0.01 0.1 1 10 1.2 1.15 1.1 1.05 1 0.95 0.9 0.85 0.8 0.75 0.7 0.65 0.6 0.55 0.5 -55c 25c 125c am12797v1 ic (a) 0.1 1 10 [v] 1.1 1.05 1 0.95 0.9 0.85 0.8 0.75 0.7 0.65 0.6 0.55 0.5 0.45 -55c 25c 125c
electrical characteristics 2n5153hr 6/17 docid15386 rev 5 2.2 test circuit figure 6. resistive load switching test circuit 1. fast electronic switch 2. non-inductive resistor
docid15386 rev 5 7/17 2n5153hr radiation hardness assurance 17 3 radiation hardness assurance the products guaranteed in radiation within the escc system fully comply with the escc 5201/002 and escc 22900 specifications. escc radiation assurance each product lot is tested according to the escc basic specification 22900, with a minimum of 11 samples per diffusion lot and 5 samples per wafer, one sample being kept as unirradiated sample, all of them being fully compliant with the applicable escc generic and/or detailed specification. st goes beyond the escc specification by performing the following procedure: ? test of 11 pieces by wafer, 5 biased at least 80% of v (br)ceo , 5 unbiased and 1 kept for reference ? irradiation at 0.1 rad (si)/s ? acceptance criteria of each individual wafer if as 100 krad guaranteed if all 10 samples comply with the post radiation electrical characteristics provided in table 6 ? delivery together with the parts of the radiation verification test (rvt) report of the particular wafer used to manufacture the products. this rvt includes the value of each parameter at 30, 50, 70 and 100 krad (si) and after 24 hour annealing at room temperature and after an additional 168 hour annealing at 100c.
radiation hardness assurance 2n5153hr 8/17 docid15386 rev 5 table 6. escc 5201/002 post radiation electrical characteristics symbol parameter test conditions min. typ. max. unit i ces collector cut-off current (i e = 0) v cb = - 60 v -1 a i ebo emitter cut-off current (i c = 0) v eb = - 4 v v eb = - 5.5 v -1 -1 a ma i ceo collector cut-off current (i b = 0) v ce = - 40 v -50 a v (br)ceo (1) 1. pulsed duration = 300 s, duty cycle 1.5% collector-emitter breakdown voltage (i b = 0) i c = - 100 ma -80 v v ce(sat) (1) collector-emitter saturation voltage i c = - 5 a i b = - 0.5 a -1.5 v v be(sat) (1) base-emitter saturation voltage i c = - 2.5 a i b = - 0.25 a i c = - 5 a i b = - 0.5 a -1.45 -2.2 v v [h fe ] (1) post irradiation gain calculation (2) 2. the post-irradiation gain calculation of [h fe ], made using h fe measurements from prior to and on completion of irradiation testing and after each annealin g step if any, shall be as specified in milstd-750 method 1019 i c = - 50 ma v ce = - 5 v i c = - 2.5 a v ce = - 5 v i c = - 5 a v ce = - 5 v [25] [35] [20] 200
docid15386 rev 5 9/17 2n5153hr package mechanical data 17 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. 4.1 to-257 figure 7. to-257 mechanical drawing
package mechanical data 2n5153hr 10/17 docid15386 rev 5 figure 8. to-257 mechanical data dim. mm min. typ. max. a4.83 5.08 a1 0.89 1.14 a2 3.05 b0.64 1.02 b1 0.64 0.76 0.89 d 16.38 16.89 d1 10.41 10.92 d2 0.97 e2.54 e 10.41 10.67 l 12.70 19.05 l1 13.39 13.64 p3.56 3.81
docid15386 rev 5 11/17 2n5153hr package mechanical data 17 4.2 to-39 figure 9. to-39 drawing
package mechanical data 2n5153hr 12/17 docid15386 rev 5 4.3 smd.5 figure 10. tsmd.5 drawing table 7. to-39 mechanical data dim. mm min. typ. max. a - 12.70 14.20 b0.400.49 c0.580.74 d6.006.40 e8.158.25 f9.109.20 g4.935.23 h0.850.95 i0.750.85 l 42 48
docid15386 rev 5 13/17 2n5153hr package mechanical data 17 table 8. smd.5 mechanical data dim. mm inch min. typ. max. min. typ. max. a 2.84 3.00 3.15 0.112 0.118 0.124 a1 0.25 0.38 0.51 0.010 0.015 0.020 b 7.13 7.26 7.39 0.281 0.286 0.291 b1 5.58 5.72 5.84 0.220 0.225 0.230 b2 2.28 2.41 2.54 0.090 0.095 0.100 2.92 3.05 3.18 0.115 0.120 0.125 d 10.03 10.16 10.28 0.935 0.400 0.405 d1 0.76 0.030 0.685 e 7.39 7.52 7.64 0.291 0.296 0.301 e 1.91 0.075
order codes 2n5153hr 14/17 docid15386 rev 5 5 order codes contact st sales office for information about the specific conditions for: ? products in die form ? tape and reel packing table 9. order codes cpn agency specification eppl quality level other features packag e lead finish marking (1) packing 2n5153s1 - - engineering model escc emitter on pin 1 smd.5 gold 2n5153s1 strip pack 2n5153esy1 - - engineering model escc - to-257 gold 2n5153esy1 + beo strip pack 2n5153rshrg 5204/002/06r yes escc emitter on pin 1 - 100 krad : escc ldr smd.5 gold 520400206r strip pack 2n5153shrg 5204/002/06 yes escc emitter on pin 1 smd.5 gold 520400206 strip pack 2N5153RHRG 5204/002/01r - escc 100 krad : escc ldr to-39 gold 520400201r strip pack 2n5153rhrt 5204/002/02r - escc 100 krad : escc ldr to-39 solder dip 520400202r strip pack 2n5153hrg 5204/002/01 - escc - to-39 gold 520400201 strip pack 2n5153hrt 5204/002/02 - escc - to-39 solder dip 520400202 strip pack 2n5153resyhrg 5204/002/04r - escc 100 krad : escc ldr to-257 gold 520400204r + beo strip pack 2n5153resyhrt 5204/002/05r - escc 100 krad : escc ld r to-257 solder dip 520400205r + beo strip pack 2n5153esyhrg 5204/002/04 - escc - to-257 gold 520400204 + beo strip pack 2n5153esyhrt 5204/002/05 - escc - to-257 solder dip 520400205 + beo strip pack 1. specific marking only. the full marking includes in addition: for the engineering models: st logo, date code; country of orig in (fr). for escc flight parts: st logo, date code, country of origin (fr), esa logo, serial number of the part within the assembly lot.
docid15386 rev 5 15/17 2n5153hr shipping details 17 6 shipping details 6.1 date code date code xyywwz is structured as below table: 6.2 documentation table 10. date code xyywwz e m (escc) 3 last two digits of the year week digits lot index in the week e s c c flight - table 11. documentation provided for each type of product quality level radiation level documentation engineering model - - escc flight - certificate of conformance 100 krad certificate of conformance 0.1 rad/s radiation verification test report
revision history 2n5153hr 16/17 docid15386 rev 5 7 revision history table 12. document revision history date revision changes 10-dec-2008 1 initial release 08-jan-2010 2 modified table 1: device summary 12-sep-2012 3 added: section 2.1: electrical characteristics (curves) on page 5 12-dec-2013 4 updated table 1: device summary and section 4: package mechanical data . added section 3: radiation hardness assurance , section 5: order codes and section 6: shipping details . 28-mar-2014 5 updated table 1: device summary and table 9: order codes . minor text changes.
docid15386 rev 5 17/17 2n5153hr 17 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of 2N5153RHRG

	To Download 2N5153RHRG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .