152 1 2 3 6 5 4 rf (radio frequency) type [1-channel (form a) type] low on resistance mm inch 8.8 0.05 .346 .002 6.4 0.05 .252 .002 3.6 0.2 .142 .008 8.8 0.05 .346 .002 6.4 0.05 .252 .002 3.9 0.2 .154 .008 features 1. photomos relay with high response speed, low leakage current and low on resistance 2. low capacitance between output terminals ensures high response speed: the capacitance between output termi- nals is small, typically 10 pf. this enables for a fast operation speed of 200 m s. 3. high sensitivity and low on resis- tance maximum 0.3 a of load current can be controlled with input current of 5 ma. the 10 w (aqv225n) on resistance is less than our conventional models. with no metallic contacts, the photomos relay has stable switching characteristics. 4. low-level off state leakage current the ssr has an off state leakage current of several milliamperes, whereas the pho- tomos relay has only 30 pa even with the rated load voltage of 80 v (aqv225n). 5. controls low-level analog signals photomos relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 6. low terminals electromotive force (approx. 1 m v) typical applications ? measuring devices ? scanner, ic checker, board tester types *indicate the peak ac and dc values. note: for space reasons, the package type indicator "x" and "z" are omitted from the seal. type output rating* part no. packing quantity through hole terminal surface-mount terminal load voltage load current tube packing style tape and reel packing style tube tape and reel picked from the 1/2/3-pin side picked from the 4/5/6-pin side ac/dc type 80 v 150 ma aqv225n aqv225na aqv225nax aqv225naz 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. 200 v 70 ma aqv227n aqv227na aqv227nax aqv227naz 400 v 50 ma AQV224N AQV224Na AQV224Nax AQV224Naz rating 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) item symbol type of connec- tion aqv225n(a) aqv227n(a) AQV224N(a) remarks input led forward current i f 50 ma led reverse voltage v r 3 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 75 mw output load voltage (peak ac) v l 80 v 200 v 400 v continuous load current i l a 0.15 a 0.07 a 0.05 a a connection: peak ac, dc b, c connection: dc b 0.20 a 0.08 a 0.06 a c 0.30 a 0.10 a 0.08 a peak load current i peak 0.45 a 0.21 a 0.15 a a connection: 100 ms (1 shot), v l = dc power dissipation p out 360 mw total power dissipation p t 410 mw i/o isolation voltage v iso 1,500 v ac temperature limits operating t opr C40 c to +85 c C40 f to +185 f non-condensing at low temperatures storage t stg C40 c to +100 c C40 f to +212 f photomos relays
aqv22 m n 153 2. electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 5ma. for type of connection, see page 31. *turn on/turn off time item symbol type of connec- tion aqv225n(a) aqv227n(a) AQV224N(a) remarks input led operate current typical i fon 0.90 ma i l = max. maximum 3.0 ma led turn off current minimum i foff 0.4 ma i l = max. typical 0.85 ma led dropout voltage typical v f 1.14 v (1.25 v at i f = 50 ma) i f = 5 ma maximum 1.5 v output on resistance typical r on a 7.0 w 30 w 70 w i f = 5 ma i l = max. within 1 s on time maximum 10 w 50 w 100 w typical r on b 3.5 w 16 w 55 w i f = 5 ma i l = max. within 1 s on time maximum 5 w 25 w 70 w typical r on c 1.8 w 8 w 28 w i f = 5 ma i l = max. within 1 s on time maximum 2.5 w 12.5 w 35 w output capacitance typical c out 10 pf i f = 0 v b = 0 f = 1 mhz maximum 15 pf off state leakage current typical i leak 30 pa 30 pa 90 pa i f = 0 v l = max. maximum 10 na transfer characteristics switching speed turn on time* typical t on 0.20 ms i f = 5 ma i l = max. maximum 0.5 ms turn off time* typical t off 0.08 ms i f = 5 ma i l = max. maximum 0.2 ms i/o capacitance typical c iso 0.8 pf f = 1 mhz v b = 0 maximum 1.5 pf initial i/o isolation resis- tance minimum r iso 1,000 m w 500 v dc ton input output 10% 90% toff n for dimensions, see page 27. n for schematic and wiring diagrams, see page 31. n for cautions for use, see page 36. reference data 1. load current vs. ambient temperature char- acteristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f type of connection: a 2.-(1) on resistance vs. ambient temperature characteristics measured portion: between terminals 4 and 6; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 2.-(2) on resistance vs. ambient temperature characteristics measured portion: between terminals 4 and 6; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 150 100 50 0 0 ?0 20 40 60 80 85 100 ?0 aqv225n aqv227n AQV224N ambient temperature, c load currnt, ma 12.0 10.0 8.0 6.0 2.0 4.0 0 0 ?0 20 40 60 80 85 ?0 aqv225n ambient temperature, c on resistance, 120 100 80 60 20 40 0 0 ?0 20 40 60 80 85 ?0 AQV224N aqv227n ambient temperature, c on resistance,
aqv22 m n 154 3. turn on time vs. ambient temperature char- acteristics sample: aqv225n, aqv227n, AQV224N; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 4. turn off time vs. ambient temperature char- acteristics sample: aqv225n, aqv227n, AQV224N; led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 5. led operate current vs. ambient tempera- ture characteristics sample: aqv225n, aqv227n, AQV224N; load voltage: max. (dc); continuous load current: max. (dc) 1.0 0.8 0.6 0.4 0.2 0 0 ?0 20 40 60 8085 ?0 aqv225n aqv227n AQV224N ambient temperature, c turn on time, ms 0.5 0.4 0.3 0.2 0.1 0 0 ?0 20 40 60 80 85 ?0 aqv225n aqv227n AQV224N ambient temperature, c turn off time, ms 5 4 3 2 1 0 0 ?0 20 40 60 80 85 ?0 aqv225n aqv227n AQV224N ambient temperature, c led operate current, ma 6. led turn off current vs. ambient temperature characteristics sample: aqv225n, aqv227n, AQV224N; load voltage: max. (dc); continuous load current: max. (dc) 7. led dropout voltage vs. ambient tempera- ture characteristics sample: all types; led current: 5 to 50 ma 8. voltage vs. current characteristics of output at mos portion measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 5 4 3 2 1 0 0 ?0 20 40 60 80 85 ?0 aqv225n aqv227n AQV224N ambient temperature, c led turn off current, ma 1.5 1.4 1.3 1.2 1.1 1.0 0 0 ?0 20 40 60 80 85 ?0 50ma 30ma 20ma 10ma 5ma led dropout voltage, v ambient temperature, c ? ? ? ? ?50 ?00 ?0 150 100 50 2 aqv225n aqv227n AQV224N current, ma voltage, v 1 34 9. off state leakage current sample: aqv225n, aqv227n, AQV224N; measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 10. led forward current vs. turn on time char- acteristics sample: aqv225n, aqv227n, AQV224N; measured portion: between terminals 4 and 6; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 11. led forward current vs. turn off time char- acteristics sample: aqv225n, aqv227n, AQV224N; measured portion: between terminals 4 and 6; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 10 ? 10 ? 10 ?2 0 200 300 400 100 aqv225n aqv227n AQV224N load voltage, v off state leakage current, a 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10 20 30 40 50 60 0 aqv225n AQV224N?qv227n led forward current, ma turn on time, ms 0.22 0.18 0.14 0.10 0.06 0 10 20 30 40 50 60 0 aqv225n AQV224N aqv227n led forward current, ma turn on time, ms 12. applied voltage vs. output capacitance characteristics measured portion: between terminals 4 and 6; frequency: 1 mhz, 30 mvrms; ambient temperature: 25 c 77 f 13. isolation characteristics (50 w impedance) measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 14. insertion loss characteristics (50 w impedance) measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 12 10 8 6 4 2 0 0 204060 80100 aqv225n AQV224N aqv227n applied voltage, v output capacitance, pf 100 80 60 40 20 0 10 4 10 5 10 6 10 7 AQV224N aqv225n?qv227n frequency, h z isolation, db 6 5 4 3 2 1 0 10 4 10 5 10 6 10 7 AQV224N aqv227n aqv225n frequency, h z insertion loss, db 5/7/2001 all rights reserved, ? copyright matsushita electric works, ltd. go to online catalog
|
