preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb features ? available in all 100ghz c - band wavelengths on the dwdm itu grid ? support multi data rate from 6.1g to 10.3 g ? up to 25 km transmission on smf ? 1 55 0nm eml laser and apd receiver ? dual cdr integrated ? s fi high speed electrical interface ? 2 - wire interface with integrated digital diagnostic monitoring ? s fp + msa package with duplex lc connector ? single +3.3v power supply ? power consumption less than 2 .5 w ? operating case temperature: - 40 ~+ 85 c regulatory compliance table 1 - regulatory compliance feature standard performance electrostatic discharge (esd) to the electrical pins mil - std - 883e method 3015.7 class 1(> 10 00v for sfi pins, >2000v for other pins. ) electrostatic discharge (esd) to the duplex lc receptacle iec 6 1000 - 4 - 2 gr - 1089 - core compatible with standards electromagnetic interference (emi) fcc part 15 class b en55022 class b (cispr 22b) vcci class b compatible with standards immunity iec 61000 - 4 - 3 compatible with standards laser eye safety fda 21cfr 1040. 10 en60950, en (iec) 60825 - 1,2 compatible with class i laser product. rohs 20 11/65/eu compliant with standards
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb absolute maximum ratings table 2 - absolute maximum ratings parameter symbol min. typical max. unit notes stor age temperature t s - 40 - +85 c supply voltage v cc - 0.5 - + 4 .0 v operating relative humidity rh - - + 85 % recommended operating conditions table 3 C recommended operating conditions parameter symbol min. typical max. unit notes operating case temperature t c - 40 - + 85 c power supply voltage v cc 3.1 4 3.3 3.4 7 v power supply current i cc - 45 5 720 ma power dissipation p d - 1.5 2. 5 w bit rate br 6.1 - 10.3 gbps transmission distance td 2 - 25 ,000 m 1 note 1: measure d with g.652 smf. optical characteristics table 4 C optical characteristics transmitter parameter symbol min. typical max. unit notes cent er wavelength range c 1529.55 - 1560.6 1 nm f c 196. 0 - 19 2 . 1 thz channel space f - 100 - ghz center wavelength tolerance c - 100 - 100 pm average output power p 0ut 1 1. 5 3 dbm 1 average output power (laser off) p 0ut - off - - - 35 dbm 1 side mode suppression ratio smsr 3 5 - - db spectral width ( - 20db) 20 - - 0.3 nm extinction ratio e r 8.2 - - db 2 dispersion penalty dp - - 2 db 3 relative intensity noise rin - - - 130 db/hz
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb reflectance tolerance rt - - - 27 db optical eye mask compliant with itu - t g.691 - 2006 2 receiver cent er wavelength range c 1528 - 1 565 nm receiver sensitivity p in - sens - - 26 - 25 dbm 3 , 4 receiver overload p in - ol - 7 - - dbm 3 optical return loss orl - - - 27 db los assert los a - 38 - - dbm los deassert los d - - - 28 dbm los hysteresis los h 0.5 - 4 db notes: 1. the optical power is launched into smf. 2. measured with a prbs 2 31 - 1 test pattern @ 9.9 gbps. 3. measured with a prbs 2 31 - 1 test pattern, ber 10 - 12 . 4. we can support - 26dbm for bol, and - 25dbm for eol. electrical characteristics table 5 C electrical characteristics transmitter parameter symbol min. typical max. unit notes differential data input amplitude v in , p - p 1 9 0 - 700 mvpp input differential impedance z in 85 10 0 115 tx_fault normal operation v ol - 0.3 - 0.4 v transmitter fault v oh 2.4 - v cc v tx_disable normal operation v il - 0.3 - 0.8 v laser disable v ih 2.0 - v cc +0.3 v receiver differential data output amplitude v out , p - p 3 00 - 85 0 mvpp output differen tial impedance z o 80 100 120 rx_los normal operation v ol - 0.3 - 0.4 v lose signal v oh 2.4 - v cc v
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb recommended host board power supply circuit figure 1 , recommended host board power supply circuit recommended interfac e circuit figure 2 , recommended interface circuit
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb pin definitions figure 3 , pin view table 6 C pin function definitions pin logic symbol name/description note 1 v ee t module transmitter ground 1 2 lvttl - o tx_f ault module transmitter fault 2 3 lvttl - i tx_disable transmitter disable; turns off transmitter laser output 3 4 lvttl - i/o sdl 2 - wire serial interface data line (mod - def2) 5 lvttl - i/o scl 2 - wire serial interface cloc k (mod - def1) 6 mod_abs module absent, connected to v ee t or v ee r in the module 2 7 lvttl - i rs0 rate select 0, n ot implement 4 8 lvttl - o rx_los receiver loss of signal indication (in fc designated as rx_los, in sonet designated as los, and in ethernet d esignated as not signal detect) 2 9 lvttl - i rs1 rate select 1, n ot implement 4 10 v ee r module receiver ground 1 11 v ee r module receiver ground 1 12 cml - o rd - receiver inverted data output 13 cml - o rd+ receiver non - inverted data output 14 v ee r module receiver ground 1 15 v cc r module receiver 3.3 v supply 16 v cc t module transmitter 3.3 v supply 17 v ee t module transmitter ground 1 18 cml - i td+ transmitter non - inverted data inpu t 19 cml - i td - transmitter inverted data input 20 v ee t module transmitter ground 1
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb notes: 1. the module ground pins are isolated from the module case. 2. the pin s shall be pulled up with 4.7k - 10kohms to a voltage between 3.14v and 3.4 7 v on host board. 3. the pin is pulled up to v cc t with a 4.7k - 10k resistor in the module. 4. the pins are pulled low to v ee t with a >30k resistor in the module. mechanical diagram figure 4 , mechanical diagram of sfp+ order information table 7 C order information part no. app lication data rate laser source fiber type latch color sp d - 10 s - e r - xx i df b 6g/10g cpri 6.1 ~ 10.3 g dwdm eml smf red note: see table 10 C wavelength guide for xx value. table 10 C wavelength guide (xx value) itu channel (xx) frequency (thz) wavelength (nm) itu channel (xx) frequency (thz) wavelength (nm) 21 192.1 1560.606 41 194.1 1544.526 22 192.2 1559. 794 42 194.2 1543.730 23 192.3 1558.983 43 194.3 1542.936 24 192.4 1558.173 44 194.4 1542.142 25 192.5 1557.363 45 194.5 1541.349
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb 26 192.6 1556.555 46 194.6 1540.557 27 192.7 1555.747 47 194.7 1539.766 28 192.8 1554.940 48 194.8 1538.976 29 192.9 15 54.134 49 194.9 1538.186 30 193.0 1553.329 50 195.0 1537.397 31 193.1 1552.524 51 195.1 1536.609 32 193.2 1551.721 52 195.2 1535.822 33 193.3 1550.918 53 195.3 1535.036 34 193.4 1550.116 54 195.4 1534.250 35 193.5 1549.315 55 195.5 1533.465 36 193.6 1548.515 56 195.6 1532.681 37 193.7 1547.715 57 195.7 1531.898 38 193.8 1546.917 58 195.8 1531.116 39 193.9 1546.119 59 195.9 1530.334 40 194.0 1545.322 60 196.0 1529.553 warnings handling precautions: this device is susceptible to damage as a result of electrostatic discharge (esd). a static free environment is highly recommended. follow guidelines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerous to human eyes. avoid eye exposure to direct or indirect radiation. legal notice important notice! all information contained in this document is subject to change without notice, at source photonicss sole and absolute discretion. source phot onics warrants performance of its products to current specifications only in accordance with the companys sta ndard one - year warranty; however, specifications designated as preliminary are given to describe components only, and source photonics expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, wa r ranties of merchantability, fi tness for a particular purpose, and non - infringement of proprietary rights. please refer to the companys terms and conditions of sale for further warranty information. source photonics assumes no liability for applications a ssistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. no license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and source photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life su pport applications where malfunction may result in injury or death to persons. source photonics customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify source photonics for any damage s resulting from such use or sale.
preliminary datasheet preliminary d ds - 75 10 rev 0 0 20 13 - 10 - 11 preliminary datasheet sp d - 10s - er - xx idfb the information contained in this document is provided on an as is basis. customer agrees that source photonics is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly fr om any use of the information contained in this document. customer must contact source photonics to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. contact u.s.a. headq uarters 20550 nordhoff street chatsworth, ca 91311 usa tel: +1 - 818 - 773 - 9044 fax: +1 - 818 - 773 - 0261 ch ina building #2&5, west export processing zone no. 8 kexin road, hi - tech zone chengdu, 611731, china tel: + 86 - 28 - 8795 - 8788 fax: + 86 - 28 - 8795 - 8789 taiwan 9f, n o 81, shui lee rd. hsinchu, taiwan, r.o.c. t el: + 886 - 3 - 5169222 f ax: + 886 - 3 - 5169213 ? copyright source photonics, inc. 2007~20 13 all rights reserved
|
