52014 tkim tc-00003103/22514 tkim no. a2294-1/5 semiconductor components industries, llc, 2014 may, 2014 http://onsemi.com pcp1403 features ? on-resistance r ds (on)1=92m ? (typ.) ? 4v drive ? protection diode in ? halogen free compliance specifications absolute maximum ratings at ta = 25 c parameter symbol conditions value unit drain to source voltage v dss 60 v gate to source voltage v gss 20 v drain current (dc) i d 4.5 a drain current (pulse) i dp pw 10 s, duty cycle 1% 18 a power dissipation p d tc=25 c 3.5 w when mounted on ceramic substrate (600mm 2 0.8mm) 1.3 w junction temperature tj 150 c storage temperature tstg - 55 to +150 c thermal resistance ratings parameter symbol value unit junction to case steady state r jc 35.7 c /w junction to ambient r ja 96.1 c /w when mounted on ceramic substrate (600mm 2 0.8mm) electrical characteristics at ta = 25 c parameter symbol conditions value unit min typ max drain to source breakdown voltage v( br ) dss i d =1ma, v gs =0v 60 v zero-gate voltage drain current i dss v ds =60v, v gs =0v 1 a gate to source leakage current i gss v gs =16v, v ds =0v 10 a gate threshold voltage v gs (th) v ds =10v, i d =1ma 1.2 2.6 v forward transconductance g fs v ds =10v, i d =2a 2.5 s static drain to source on-state resistance r ds (on)1 i d =2a, v gs =10v 92 117 m r ds (on)2 i d =1a, v gs =4.5v 120 168 m r ds (on)3 i d =1a, v gs =4v 132 185 m input capacitance ciss v ds =20v, f=1mhz 310 pf output capacitance coss 40 pf reverse transfer capacitance crss 25 pf continued on next page. orderin g numbe r : ena2294a stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should n ot be assumed, damage may occur and reliability may be affected. n-channel power mosfet 60v, 4.5a, 117m ? , single pcp ordering information see detailed ordering and shipping inform ation on page 2 of this data sheet.
pcp1403 no.a2294-2/5 continued from preceding page. parameter symbol conditions value unit min typ max turn-on delay time t d (on) see specified test circuit 5.6 ns rise time t r 7.0 ns turn-off delay time t d (off) 26 ns fall time t f 14 ns total gate charge qg v ds =30v, v gs =10v, i d =4.5a 6.7 nc gate to source charge qgs 1.0 nc gate to drain ?miller? charge qgd 1.6 nc forward diode voltage v sd i s =4.5a, v gs =0v 0.88 1.2 v ordering & package information packing type:td marking device package shipping note PCP1403-TD-H pcp, sc-62 sot-89, to-243 1,000 pcs. / reel pb-free and halogen free electrical connection sw itching time test circuit product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product per formance may not be indicated by the electrical characteristics if operated under different conditions. qt lot no. 1 3 2 td(pcp)
pcp1403 no.a2294-3/5
pcp1403 no.a2294-4/5 allowable power dissipation, p d -- w
pcp1403 ps no.a2294-5/5 package dimensions PCP1403-TD-H sot-89/pcp-1 case 419au issue o unit : mm 1: gate 2: drain 3: source recommended soldering footprint on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc mak es no warranty, representation or guarantee regarding the suitab ility of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, conseq uential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s techn ical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use a s components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other applica tion in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for an y such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and dis tributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of persona l injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture o fthe part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale i n any manner. note on usage : since the pcp1403 is a mosfet product, please avoid using this device in the vicinity of highly charged objects. 2.2 1.0 1.8 1.5 0.9 3.7 1.5 3.0 1.0 45 45
|
