ver: 0.2 aug 12, 2013 tel: 886-3-5788833 http://www.gmt.com.tw 1 G2541 global mixed-mode technology 6-channels 40v white led driver with boost regulator features ? wide 4.2v to 24v input supply range ? 600khz fixed frequency ? 40v/2a, 0.2 n-channel mosfet ? maximum programmable led channel current 30ma ? current accuracy 3% and current balance 2% ? 100hz~25khz pwm dimming ? pwm to dc dimming ? protection ? input under-voltage protection ? over current protection ? over voltage protection ? thermal protection ? rohs compliant ? tqfn4x4-20 package applications ? umpc and notebook computer backlight ordering information order number temp. range package (green) packing G2541r91u 2541 -40 c to +85 c tqfn4x4-20 note:r9: tqfn4x4-20 1: bonding code u: tape & reel general description the G2541 is a high-efficienc y 6-channel white led driver. it is designed for lcd panel that employs an led array as the lighting source. an int egrated switch current mode boost controller drives six st rings in parallel and supports up to 10 pieces of leds per string. the G2541 automatically regul ated supply voltage for the led light bars without the need to calculate the output for different led types. it also integrates a 40v n-channel mosfet that provides hi gh output power. the 6-channel current driver is ideal for c onstant current driving, and well matched less than 3%. to set the maximum driving cur- rent, the iset pin is used to determine reference current. each channel of the current dr ivers is set to 800 times of this reference current. a pwm pin can be used to perform pwm dimming from the range of 100hz to 25khz. the mode pin in G2541 is used to set the dimming mode. if mode pin set to float ing, the dimming mode is in the pwm mode, the current driver on/off is synchro- nized with the pwm signal. if mode pin set to agnd, pwm and iled current is set at pwm duty multiplied by iset current when pwm duty 25%. if the pwm duty <25%, the iled current is fixed at 0.25xiset, and the dimming duty is 4 x pwm duty. if mode set to vdc, the dimming mode operated in the pure dc mode, the cur- rent-source outputs are dc dimming and the pwm duty cycle modulates the amplit ude of the currents. open led-string automatically dis able the channel from enter- ing over voltage protection. pin configuration typical application circuit vin tqfn4x4-20 1 2 3 4 5 11 12 13 14 15 16 17 18 20 19 8 7 9 10 thermal pad 6 en cs1 ovp pgnd pgnd lx lx pwm vdc comp G2541 nc iset mode agnd cs6 cs5 cs4 cs3 cs2 note: recommend connecting the thermal pad to the ground for excellent power dissipation. vin vdc en mode pwm G2541 comp iset agnd pgnd led6 led5 led4 led3 led2 led1 ovp lx l1 d1 vin c vin r vin vcc c vcc r c1 c c2 c c1 r iset r ovp1 r ovp2 c out v out 40v max vin tqfn4x4-20 1 2 3 4 5 11 12 13 14 15 16 17 18 20 19 8 7 9 10 thermal pad 6 en cs1 ovp pgnd pgnd lx lx pwm vdc comp G2541 nc iset mode agnd cs6 cs5 cs4 cs3 cs2 note: recommend connecting the thermal pad to the ground for excellent power dissipation. vin vdc en mode pwm G2541 comp iset agnd pgnd led6 led5 led4 led3 led2 led1 ovp lx l1 d1 vin c vin r vin vcc c vcc r c1 c c2 c c1 r iset r ovp1 r ovp2 c out v out 40v max
|
