. mvs-5000 machine vision strobe description the perkinelmer mvs 5000 machine vision strobe produces short duration, high intensity light pulses for industri- al vision applications. when operated in conjunction with a ccd/cid solid state video camera, the unit front or backlights objects, freezes motion and eliminates blur, thus enhancing image quality. the mvs 5000 is a dc-powered unit. the linear xenon flashlamp is pack- aged in a metal enclosure with a fan for cooling. this strobe incorporates a reflector for maximum intensity and a diffuser window for even illumination of the target area. input power and signal level cable connections are made through a 9-pin connector mounted on the back of the unit. www.perkinelmer.com/opto datasheet lighting imaging telecom machine vision illumination systems features ? compact ? light weight ? 12 vdc input ? optically isolated trigger input ? long life xenon flashlamp ? flash rates to 30 hz ? uniform illumination ? reduced emi
input voltage input current flashlamp voltage discharge capacitor discharge energy discharge power tirgger input: (1) trigger pulse duration 11-15 vdc 4.5 amps at 12 v (30hz) 600 volts 8 microfarads 1.4 joules 43 watts at 30 hz for more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto . all values are nominal; specifications subject to change without notice. ? 2001 perkinelmer inc. all rights reserved. 0601 . usa: perkinelmer optoelectronics 35 congress street salem, ma 01970 toll free: (800) 950-3441 (usa) phone: (978) 745-3200 fax: (978) 745-0894 europe: perkinelmer optoelectronics wenzel-jaksch-str. 31, d-65199 weisbaden, germany phone: +49 (0) 611-492-437 fax: +49 (0)611-492-159 asia: perkinelmer optoelectronics 47 ayer rajah crescent #06-12 singapore 139947 phone: +65 775 2022 fax: +65 775 1008 spectral bandwidth (1) flash rate flashlamp life (3) flash duration (2) flash to flash variation 300 to 1100+ nm 30 hz maximum >10 8 flashes 20 microseconds < 5% optical specifications electrical specifications mvs-5000 strobe www.perkinelmer.com/opto mvs 5000 2.50 (63.5) 4.13 (104.8) dimensions are in inches (millimeters) (30.2) 1.19 2.50 (63.5) 2.06 (52.3) 1.75 (44.5) 8.38 (212.7) 2.25 (37.2) 1/4?20 for mounting (2 places) mechanical specifications note 1: delay between flash command and light output is 8 microseconds typical note 1: spectral bandwidth may be extended into the ultraviolet with other enclosure window materials. note 2: measured at 1/3 of peak value. note 3: prior to light output decreasing to 50% of the initial value. note 4: area where energy is not less than 50% of maximum. note 5: variations available: mvs 5002: 2.9 j at 15 hz max and mvs 5004: .75 j at 60 hz max +5 volt pulse into opto-isolator with 150 ohm nominal series resistor 10 to 100 microseconds distance 1 foot 2 feet 3 feet area illuminated 14.25 in. x 13 in. 29 in. x 28 in. 37.5 in. x 36.5 in. photometric 60 lux-sec 16 lux-sec 7 lux-sec radiometric 4.90 x 10 -5 j/cm 2 1.33 x 10 -5 j/cm 2 5.5 x 10 -6 j/cm 2 illumination characteristics
|
