the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. txxxxn/ns 2013.03.13-b/0 page 1 of 3 signal miniature package amplifier txxxxn/ns series part number system txxxxn package style isolation power output power supply output input isolation amplifier features l four- port isolation (input, output, power supply and isolation power output) l high accuracy (0.1% f.s.) l high linearity (0.1% f.s.) l isolation voltage(2.5kvdc/60s) l extremely low temperature drift (35ppm/ c)industry standard(operating temperature range:-25 c ~ 71 c) l high reliability(mtbf>500,000 hours) general description txxxxn series ----is a high integration, high efficiency linear active isolation amplifier module, with voltage/ current signal input and voltage/ current signal output. in the three-wire and four-wire applications, our products of miniature package largely predigest customers design and helpfully improve the using room ratio of pcb. adopting electromagnetism isolation technology, it is available to keep higher accuracy and extremely lower temperature drift more than photocoupler isolation. these modules have three-port isolation (input, output and power supply),and the isolation voltage between them is up to 2.5kvdc. selection guide model input output power supply isolation power output channels t1130n 4~20ma 4~20ma 24v none 1 t113 3n / n s 4 ~ 20ma 4 ~ 20ma 24v 24v 1 t223 0n / n s 0 ~ 20m a 0 ~ 20ma 24v none 1 t2233n/ n s 0~20ma 0 20ma 24v none 1 T2250N/ns 0~20ma 0~20ma 12v none 1 t6130n/ns 0~5v 4~20ma 24v none 1 t5130n/ns 0~10v 4~20ma 24v none 1 t5530 n/n s 0 ~ 10v 0 ~ 10v 24v none 1 t6530 n/n s 0 ~ 5v 0 ~ 10v 24v none 1 t6630 n/n s 0 ~ 5v 0 ~ 5v 24v none 1 note:1. we could also offer customer design for special input and output. 2. models listed with strike-through text have been officially discontinued. electrical characteristics power supply (nominal power supply) 5% power consumption 2w power supplyparameter power protection reverse protection output voltage (nominal) 10% isolation power output parameter output current 25ma input signal see product program voltage input 10m (@ maximum input) input impedance current input 250mv(@20ma input) voltage input 30v input parameter overload current input 50ma output signal see product program current output 500 (@20ma output) output parameter load capacity voltage output 2k (@max output)
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. txxxxn/ns 2013.03.13-b/0 page 2 of 3 transmission characteristics zero offset 0.1%f.s. gain error 0.1%f.s. temperature drift 0.0035%f.s./ c (-25 c to +71 c) isolation characteristics voltage input four-port isolation (signal input, signal output, power supply and isolation power output) galvanic isolation current input four-port isolation (between input, output, power supply and isolation power output) isolation voltage 2.5kvdc (tested for 1minute and leakage current < 1ma, humidity < 70%) (note: it is 500vdc between signal input and isolation power out) voltage input 100m , 500vdc (between signal input, signal output and power supply) insulation resistance current input 100m , 500vdc (between signal input, signal output, power supply and isolation power output) other characteristics operation temperature:-25 c ~ +71 c ambient temperature transport and storage temperature:-50 c ~ +105 c package dip16/soic16 weight about 6g application environment no dust, fierce vibration, impulsion and corrosive gas note: 1. all specifications measured at ta=25 c, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. only typical models listed, specifications of custom product may be different. please contact our service people directly for certain conditions. schematic diagram voltage input, current output power supply input output 8- 7+ 1- 2+ 15+ 16- sin- sout+ sin+ sout- voltage input, voltage output 8- 7+ 1- 3+ 15+ 16- sin- sout+ sin+ sout- power supply input output current input, voltage output isolation power output input power supply output 8- sin+ sin- sout+ sout- 7+ 3+ 1- 16- 15+ 9- 10+ current input, current output isolation power output input power supply output 8- sin+ sin- sout+ sout- 7+ 2+ 1- 16- 15+ 9- 10+ application circuit diagram voltage input, current output n c s i n + s o u t - s i n - 2.54 2.54 p i n - n c p i n + s o u t - n c n c power supply output input 16 9 8 1 + - + - + - voltage input, voltage output power supply output input n c s i n + s o u t - s i n - 2.54 2.54 p i n - n c p i n + s o u t - n c n c 16 9 1 8 + - + - + -
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. txxxxn/ns 2013.03.13-b/0 page 3 of 3 current input, voltage output power supply isolation power output output input n c s i n + s o u t - s i n - 2.54 2.54 p i n - n c p i n + s o u t - p o u t - p o u t + 16 9 8 1 + - + - + - + - current input, current output output input power supply isolation power output n c s i n + s o u t - s i n - 2.54 2.54 p i n - n c p i n + s o u t - p o u t - p o u t + + - + - + - + - 16 9 8 1 application note 1. please read instruction book carefully before using the product. if you have any question, please contact with our technical support. 2. the power supply of this product should be dc power source. it is forbidden to use 220vac power supply 3. do not reverse the positive and negative pole of power supply and signal input. after service 1. products are carefully inspected and controlled before going out from our factory. if they operated abnormally or there were anything wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. 2. 3 years warranty since the delivery date. during the period of quality guarantee, our company will repair or change free of charge if product has any quality problem in the process of normally using. application circuits see a guide to instrumentation isolation amplifiers for more detail. outline dimensions,recommended footprint&packaging mornsun science & technology co.,ltd. address: no. 5, kehui st. 1, kehui development center, science ave., guangzhou science city, luogang district, guangzhou,p.r.china. tel: 86-20-38601850 fax:86-20-38601272 e-mail: info@mornsun.cn http://www.mornsun-power.com
|
