View PS9123-F3_8402759.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r08ds0030ej0100 rev.1.00 page 1 of 13 aug 14, 2012 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. data sheet ps9123 high cmr, 15 mbps totem pole output type, 5-pin sop (so-5) photocoupler description the ps9123 is an optically coupled high-speed, totem pole output isolator containing a gaalas led on the input side and a photodiode and a signal processing circuit on the output side on one chip. the ps9123 is specified high cmr, high ctr and pulse width distortion with operating temperature. features ? high common mode transient immunity (cm h , cm l = 20 kv/ s typ.) ? small package (so-5) ? pulse width distortion ( ? t phl ? t plh ? = 4 ns typ.) ? high-speed (15 mbps) ? high isolation voltage (bv = 3 750 vr.m.s.) ? totem pole output ? embossed tape product : PS9123-F3 : 2 500 pcs/reel ? pb-free product ? safety standards ? ul approved: file no. e72422 ? csa approved: no. ca 101391 (ca5a, can/csa-c22.2 60065, 60950) ? din en60747-5-5 (vde0884-5): 2011-11 approved no. 40008902 (option) applications ? plc ? inverter ? ac servo r08ds0030ej0100 rev.1.00 aug 14, 2012 1. anode 2. cathode 3. gnd 4. v o 5. v cc pin connection (top view) 53 12 4 truth table led output on l off h
ps9123 e r08ds0030ej0100 rev.1.00 page 2 of 13 aug 14, 2012 package dimensions (unit: mm) 1.27 0.4 +0.10 ?0.05 0.25 m 0.10.1 2.60.2 (4.4) *1 7.00.3 0.50.3 0.15 +0.10 ?0.05 3.4 +0.3 ?0.1 53 12 4 *1 ( ) indicates reference dimension. photocoupler construction parameter unit (min.) air distance 4.2 mm outer creepage distance 4.2 mm isolation distance 0.2 mm marking example no. 1 pin mark initial of renesas (engraved mark) rank code year assembled (last 1 digit) week assembled n 2 31 9123 n231 r *1 *1 bar : pb-free type number assembly lot ni/pd/au plating
ps9123 e r08ds0030ej0100 rev.1.00 page 3 of 13 aug 14, 2012 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps9123 ps9123-ax pb-free 20 pcs (tape 20 pcs cut) standard products ps9123 PS9123-F3 PS9123-F3-ax (ni/pd/au) embossed tape 2 500 pcs/reel (ul, csa approved) ps9123-v ps9123-v-ax 20 pcs (tape 20 pcs cut) din en60747-5-5 ps9123-v-f3 ps9123-v-f3-ax embossed tape 2 500 pcs/reel (vde0884-5): 2011-11 approved (option) note: ? 1. for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current ? 1 i f 20 ma reverse voltage v r 5 v detector supply voltage v cc 7 v output voltage v o 7 v high level output current i oh ? 5 ma low level output current i ol 13 ma power dissipation ? 2 p c 130 mw isolation voltage *3 bv 3 750 vr.m.s. operating ambient temperature t a ? 40 to +100 c storage temperature t stg ? 55 to +125 c notes: ? 1. reduced to 0.19 ma/ c at t a = 60 c or more. ? 2. t a = ? 40 to +100 c, applies to output pin v o and power supply pin v cc . reduced to 2.4 mw/ c at t a = 70 c or more. ? 3. ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-2 shorted together, 3-5 shorted together. recommended operating conditions parameter symbol min. typ. max. unit high level input current i fh 7.5 12.5 ma low level input voltage v fl 0 0.8 v supply voltage v cc 4.5 5.0 5.5 v ttl (loads) n 3
ps9123 e r08ds0030ej0100 rev.1.00 page 4 of 13 aug 14, 2012 electrical characteristics (t a = ? 40 to +100 c, unless otherwise specified) parameter symbol conditions min. typ. ? 1 max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.3 1.55 1.8 v reverse current i r v r = 3 v, t a = 25 c 10 a terminal capacitance c t f = 1 mhz, v f = 0 v, t a = 25 c 30 pf detector high level output current i oh v cc = v o = 5.5 v, i f = 0 ma 0.05 100 a high level output voltage v oh v cc = 4.5 v, i f = 0 ma, i oh = ?2 ma 2.4 3.0 v low level output voltage v ol v cc = 4.5 v, i f = 7 ma, i ol = 8 ma 0.25 0.6 v high level supply current i cch v cc = 5.5 v, i f = 0 ma, v o = open 4 7 ma low level supply current i ccl v cc = 5.5 v, i f = 10 ma, v o = open 6 10 ma high level output short circuit current i osh v cc = 5.5 v, v o = gnd, i f = 0 ma, 10 ms or less ?43 ma low level output short circuit current i osl v cc = v o = 5.5 v, i f = 8 ma, 10 ms or less 28 ma coupled threshold input voltage (h l) i fhl v cc = 5 v, v o = 0.6 v 2.3 5 ma isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60%, t a = 25 c 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz, t a = 25 c 0.6 pf propagation delay time (h l) *2 t phl v cc = 5 v, i f = 7.5 ma 10 28 60 ns propagation delay time (l h) *2 t plh v cc = 5 v, i f = 7.5 ma 10 32 60 ns pulse width distortion (pwd) *2 ? t phl ?t plh ? v cc = 5 v, i f = 7.5 ma 4 30 ns common mode transient immunity at high level output *3 cm h v cc = 5 v, t a = 25 c, i f = 0 ma, v o (min.) = 2 v, v cm = 1 kv 15 20 kv/ s common mode transient immunity at low level output *3 cm l v cc = 5 v, t a = 25 c, i f = 7.5 ma, v o (max.) = 0.8 v, v cm = 1 kv 15 20 kv/ s
ps9123 e r08ds0030ej0100 rev.1.00 page 5 of 13 aug 14, 2012 notes: *1. typical values at t a = 25 c *2. test circuit for propagation delay time input output 1.5 v v oh v ol t phl t plh i f (on) 50% i f (on) c l includes probe and stray wiring capacitance. pulse input (i f ) v o (monitor) input (monitor) (pw = 500 ns, duty cycle = 1/2) 47 v cc = 5 v 0.1 f c l = 30 pf 2.5 k 1.3 k v cc = 5 v 1 2 3 4 5 *3. test circuit for common mode transient immunity 90% 10% 1 kv 0 v v oh 2 v 0.8 v v ol v cm v o (i f = 0 ma) v o (i f = 7.5 ma) t r t f c l includes probe and stray wiring capacitance. v o (monitor) v cc = 5 v 0.1 f c l = 15 pf i f v cm = 1 kv 1 2 3 4 5 sw ? +
ps9123 e r08ds0030ej0100 rev.1.00 page 6 of 13 aug 14, 2012 typical characteristics (t a = 25 c, unless otherwise specified) 20 40 60 80 120 0 10 20 30 40 20 40 60 80 100 120 0 50 100 150 1.0 0.01 0.1 1 10 100 1.2 1.4 1.6 1.8 2.0 2.2 2.4 t a = +100?c +85?c +50?c +25?c 0?c ?40?c ?50 ?25 0 25 50 75 100 0 8 4 12 16 20 i ccl (i f = 10 ma) v cc = 5.5 v i cch (i f = 0 ma) ?50 ?25 0 25 50 75 100 0 2.0 1.0 3.0 4.0 5.0 v cc = 4.5 v, v f = 0.8 v, i oh = 2.0 ma 0 20 10 30 40 50 ?50 ?25 0 25 50 75 100 t plh t phl pwd i f = 7.5 ma v cc = 5.0 v 100 maximum forward current vs. ambient temperature maximum forward current i f (ma) ambient temperature t a (?c) forward current vs. forward voltage forward current i f (ma) forward voltage v f (v) high level output voltage vs. ambient temperature high level output voltage v oh (v) ambient temperature t a (?c) detector power dissipation vs. ambient temperature detector power dissipation p c (mw) ambient temperature t a (?c) supply current vs. ambient temperature high level supply current i cch (ma) low level supply current i ccl (ma) ambient temperature t a (?c) propagation delay time, pulse width distortion vs. ambient temperature propagation delay time t phl , t plh (ns), pulse width distortion t phl ? t plh (ns) ambient temperature t a (?c) remark the graphs indicate nominal characteristics.
ps9123 e r08ds0030ej0100 rev.1.00 page 7 of 13 aug 14, 2012 0 0.2 0.1 0.3 0.4 0.5 2.5 7.5 5 10 12.5 13 0 v cc = 5.0 v v cc = 4.5 v, i f = 5.0 ma 1 2 3 4 5 ?50 ?25 0 25 50 75 100 ?50 ?25 0 25 50 75 100 0 0.2 0.1 0.3 0.4 0.5 v cc = 4.5 v, i f = 7.5 ma, i ol = 8.0 ma ?1 ?2 ?3 ?4 ?5 0 2 1 3 4 5 v cc = 4.5 v, v f = 0.8 v ?30 ?25 ?20 ?15 ?10 ?5 0 2 1 3 4 v cc = 4.5 v, i f = 250 a 85?c 0 40 20 60 510152025 t a = 25?c, v cc = 5 v t phl t plh pwd low level output voltage vs. ambient temperature low level output voltage v ol (v) ambient temperature t a (?c) low level output voltage vs. low level output current low level output voltage v ol (v) low level output current i ol (ma) high level output voltage vs. high level output current high level output voltage v oh (v) threshold input current vs. ambient temperature threshold input current i fhl (ma) ambient temperature t a (?c) high level output voltage vs. high level output current high level output voltage v oh (v) high level output current i oh (ma) high level output current i oh (ma) propagation delay time, pulse width distortion vs. forward current propagation delay time t phl , t plh (ns), pulse width distortion t phl ? t plh (ns) forward current i f (ma) 85?c85?c t a = 100?c 85?c 0?c ?40?c 25?c t a = 100?c ?40?c 85?c 25?c 0?c t a = 100?c 85?c 0?c 25?c remark the graphs indicate nominal characteristics.
ps9123 e r08ds0030ej0100 rev.1.00 page 8 of 13 aug 14, 2012 taping specifications (unit: mm) outline and dimensions (tape) tape direction PS9123-F3 outline and dimensions (reel) packing: 2 500 pcs/reel 1001.0 13.00.2 3302.0 2.00.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 2.00.5 13.00.2 r 1.0 21.00.8 1.550.1 2.00.05 4.00.1 1.750.1 3.90.1 3.45 max. 7.40.1 0.3 0.05 8.00.1 1.5 +0.1 ?0 5.50.1 12.00.2 3.00.1
ps9123 e r08ds0030ej0100 rev.1.00 page 9 of 13 aug 14, 2012 recommended mount pad dimensions (unit: mm) d b1 b2 a ps9123 part number ab1 c d b2 6.25 1.27 2.54 0.8 1.45 c
ps9123 e r08ds0030ej0100 rev.1.00 page 10 of 13 aug 14, 2012 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temper ature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) 12030 s (preheating) 220?c 180?c package surface temperature t (?c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260?c max. 120?c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pin) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% or less is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler?s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
ps9123 e r08ds0030ej0100 rev.1.00 page 11 of 13 aug 14, 2012 usage cautions 1. this product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of 0.1 f or more is used between v cc and gnd near device. also , ensure that the distance between the leads of the photocoupler and capacitor is 10 mm or less. 3. avoid storage at a high temperature and high humidity.
ps9123 e r08ds0030ej0100 rev.1.00 page 12 of 13 aug 14, 2012 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068- 1/din en 60068-1) 40/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.6 u iorm , p d < 5 pc u iorm u pr 707 1 131 v peak v peak test voltage (partial discharge test, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 326 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (i ec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664 -1 vde0110 part 1) iii a storage temperature range t stg ?55 to +125 c operating temperature range t a ?40 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum pe rmissible in case of fault, see thermal derating curve) package temperature current (input current i f , p si = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 200 300 10 9 c ma mw
ps9123 e r08ds0030ej0100 rev.1.00 page 13 of 13 aug 14, 2012 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history ps9123 data sheet description rev. date page summary 0.01 jan 29, 2011 ? first edition issued throughout ?preliminary data sheet? is changed to ?data sheet.? p.1 modification of features p.2 modification of package dimensions modification of photocoupler construction modification of marking example p.3 addition of ordering information modification of absolute maximum ratings modification of recommend ed operating conditions pp.4, 5 modification of electrical characteristics pp.6, 7 addition of typical characteristics p.8 addition of tapi ng specifications p.9 addition of recommended mount pad dimensions aug 14, 2012 pp.10, 11 addition of notes on handling 1.00 p.12 addition of specification of vde marks license document
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". t he recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you mus t check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance desig n. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufactu re, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this do cument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or othe rwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by yo u or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesa s electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. htt p ://www.renesas.co m refer to "htt p ://www.renesas.com/" for the latest and detailed information . r e n esas el ec tr o ni cs am e ri ca in c . 2880 scott boulevard santa clara , ca 95050-2554 , u.s.a . tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-651-700, fax: +44-1628-651-804 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics mala y sia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petalin g jaya, selan g or darul ehsan, malaysi a tel: +60-3-7955-9390 , fax: +60-3-7955-951 0 renesas electronics korea co. , ltd . 11f., samik lavied' or bld g ., 720-2 yeoksam-don g , kan g nam-ku, seoul 135-080, korea tel: +82-2-558-3737 , fax: +82-2-558-514 1 s ale s o ffi c e s ? 2012 renesas electronics corporation. all ri g hts reserved . colo p hon 2.2

▲Up To Search▲

Price & Availability of PS9123-F3

	To Download PS9123-F3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .