wall industries, inc. 5 watson brook road exeter, nh 03833 02/07/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 1 of 4 datasheet rev. c dtem1070 series 100~240vac input voltage range 60~72 watts, single outputs iec-320-c14, c8, and c6 ac inlet types ac/dc medical desktop power supplies iec-320-c14 iec-320-c8 iec-320-c6 features ? single outputs ? cec / energy star level v compliant ? rohs compliant ? short circuit and over voltage protection ? mtbf: > 30,000 hours ? dimensions: 5.20? x 2.13? x 1.22? ? 100~240vac input voltage range ? iec-320-c14, iec-320-c8, and iec-320-c6 ac inlet connectors available ? ul/cul 60601-1 (3 rd edition), tuv/rh en/iec 60601-1, cb, ce, and fcc safety approvals ? optional output connectors available description the dtem1070 series of ac/dc medical desktop power supplies provides up to 72 watts of continuous outpu t power. all models have a si ngle output and a wide i nput voltage range of 100~240vac. all models are protecte d against over voltage and short circuit conditions. this series is rohs and cec/energy star level v complian t and has ul/cul 60601-1 (3 rd edition), tuv/rh en/iec 60601-1, cb, ce, and fcc safety approvals. this series also has three ac inlet connector types available: iec-320-c14, iec- 320-c8, and iec-320-c6. optional outpu t connectors are also available. please call factory for ordering details.
rev. c dtem1070 series c14 and c6 inlet types 60~72 watts, single outputs ac/dc medical desktop power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 02/07/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 2 of 4 specifications: dtem1070 series all specifications are based on 25c, nominal input volta ge, and maximum output current unless otherwise noted. we reserve the right to change specifications based on technological advances. specification test conditions min typ max unit input specifications input voltage range 100 240 vac input frequency 50 60 hz input current 2 a inrush current 90 a output specifications output current see table output voltage (see note 2) see table line regulation line regulation is defined by changing 10% of input voltage from nominal line and rated load. -1 +1 % load regulation -5 +5 % output power see table ripple & noise measured at nominal line and full load with 20mhz limited bandwidth and 0.1f ceramic and 47f aluminum capacitors in parallel on the output. 250 mvp-p hold-up time 8.3 ms turn-on time 3 s protection over voltage protection latch off short circuit protection automatic recovery general specifications efficiency (typical) 85 % environmental specifications operating temperature 0 40 c storage temperature -20 85 c storage humidity 5 95 % mtbf > 30,000 hours physical specifications dimensions (l x w x h) 5.20 x 2.13 x 1.22 inches (132 x 54 x 31 mm) ac inlet connector (see note 1) iec-320-c14, iec-320-c8, iec-320-c6 weight 11.3oz (320g) safety & compliance safety standards ul/cul 60601-1 (3 rd edition), tuv/rh en/iec 60601-1, fcc, cb, ce compliance rohs, weee, cec/energy star level v
rev. c dtem1070 series c14 and c6 inlet types 60~72 watts, single outputs ac/dc medical desktop power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 02/07/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 3 of 4 model selection table output current model number (1) input voltage range output voltage (2) min max ripple & noise (3) maximum output power ac inlet type dtem1070 1 a 12 ~ 17 vdc 0a 6a 250mvp-p 72w dtem1070 1 b 18 ~ 24 vdc 0a 4a 250mvp-p 72w dtem1070 1 c 12 ~ 17 vdc 0a 5a 250mvp-p 60w dtem1070 1 d 100 ~ 240 vac 18 ~ 24 vdc 0a 3.33a 250mvp-p 60w iec-320-c14 dtem1070 2 a 12 ~ 17 vdc 0a 6a 250mvp-p 72w dtem1070 2 b 18 ~ 24 vdc 0a 4a 250mvp-p 72w dtem1070 2 c 12 ~ 17 vdc 0a 5a 250mvp-p 60w dtem1070 2 d 100 ~ 240 vac 18 ~ 24 vdc 0a 3.33a 250mvp-p 60w iec-320-c8 dtem1070 3 a 12 ~ 17 vdc 0a 6a 250mvp-p 72w dtem1070 3 b 18 ~ 24 vdc 0a 4a 250mvp-p 72w dtem1070 3 c 12 ~ 17 vdc 0a 5a 250mvp-p 60w dtem1070 3 d 100 ~ 240 vac 18 ~ 24 vdc 0a 3.33a 250mvp-p 60w iec-320-c6 notes 1. the number in red represents the type of ac inlet: ? 1 ? is for iec-320-c14 type, ? 2 ? is for iec-320-c8 type, and ? 3 ? is for iec-320-c6 type. 2. the output voltage is specified as a range (ex: 18~24vdc); the customer must specify what they want the voltage set at. 3. ripple and noise is measured at nominal line and full load with 20mhz limited bandwidth and a 0.1f ceramic and 47f aluminu m capacitors in parallel on the output. 4. optional output connectors are available. please call factory for ordering details. mechanical drawing iec-320-c14 iec-320-c6 1.220.04 (311) 1.220.04 (311) 5.200.04 (1321) 2.130.04 (541) 1.220.04 (311) unit: inches (mm) all dimensions are for reference only iec-320-c8 1.220.04 (311)
rev. c dtem1070 series c14 and c6 inlet types 60~72 watts, single outputs ac/dc medical desktop power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 02/07/2013 603-778-2300 www.wallindustries.com fax 603-778-9797 page 4 of 4 company information wall industries, inc. has created custom and modified units for over 50 years. our in-house research and development engineers will provide a solution that exceeds your perfo rmance requirements on-time and on budget. our iso9001-2008 certification is just one example of our commitment to produc ing a high quality, well-documented product for our customers. our past projects demonstrate our commitment to you, our cu stomer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and f unction requirements. we will continue to provide ongoing support for your project a bove and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone: ? (603)778-2300 toll free: ? (888)597-9255 fax: ? (603)778-9797 e-mail: sales@wallindustries.com web: www.wallindustries.com address: 5 watson brook rd. exeter, nh 03833
|
