data sheet part number 856582 172.8 mhz saw filter subject to change or obsolescence without notice rev a 06-07 triquint semiconductor, inc. ? page 1 of 5 features ? for multi carrier wcdma applications ? usable bandwidth 18 mhz ? low loss ? high attenuation ? single-ended operation ? ceramic surface mount package (smp) ? hermetic ? rohs compliant (2002/95/ec), pb -free ? package pin configuration surface mount 7.01 x 5.51 x 1.70 mm bottom view 9 10 7 86 4 5 12 3 pin no. description 9 input 4 output 5,10 ground 1,2,3 case ground 6,7,8 case ground 5.50 0.60 1.24 nom. 1.35 max. 1.40 2.54 1.00 7.00 1.27 0.69 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.13mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m, over a 2 - 6 m ni plating pb
data sheet part number 856582 172.8 mhz saw filter subject to change or obsolescence without notice rev a 06-07 triquint semiconductor, inc. ? page 2 of 5 electrical specifications (1) operating temperature range: (2) -40 to +85 o c parameter (3) minimum typical maximum unit center frequency - 172.8 - mhz maximum insertion loss 163.8 - 181.8 mhz - 8.7 11 db lower 1 db bandedge (4) upper 1 db bandedge - 181.8 162.5 183.2 163.8 - mhz mhz lower 3 db bandedge (4) upper 3 db bandedge 182.8 161.6 184.1 162.8 - mhz mhz lower 35 db bandedge (4) upper 35 db bandedge 157.8 - 158.9 186.8 - 187.9 mhz mhz lower 42 db bandedge (4) upper 42 db bandedge 152.8 - 158.5 187.1 - 192.8 mhz mhz relative rejection (4) 80 - 152.8 mhz 192.8 - 500 mhz 500 - 1000 mhz 42 42 42 52 48 70 - - - db db db passband variation 163.8 - 181.8 mhz - 0.5 1.0 db group delay variation 163.8 - 181.8 mhz - 40 100 nsec phase variation 163.8 - 181.8 mhz - 4 15 deg source/load impedance (5) - 50 - ? notes : 1. all specifications are based on triquint test circuit shown below 2. in production, devices will be tested at room temperature to a guardbanded specific ation to ensure electrical compliance ove r temperature 3. electrical margin has been built into the design to account for the variations due to manufacturing tolerances 4. relative to minimum insertion loss 5. this is the optimum impedance in order to achieve the performance shown test circuit: actual matching values may vary due to pcb layout and parasitics 50 ? single-ended input 1,2,3,5 6,7,8,10 50 ? 24nh 94 27nh 50 ? 39pf 47pf 50 ? single-ended output
data sheet part number 856582 172.8 mhz saw filter subject to change or obsolescence without notice rev a 06-07 triquint semiconductor, inc. ? page 3 of 5 typical performance (at +25 o c)
data sheet part number 856582 172.8 mhz saw filter subject to change or obsolescence without notice rev a 06-07 triquint semiconductor, inc. ? page 4 of 5 matching schematics actual matching values may vary due to pcb layout and parasitics 50 ? single-ended input 1,2,3,5 6,7,8,10 50 ? 24nh 94 27nh 50 ? 39pf 47pf 50 ? single-ended output marking pcb footprint id dot pin 1 date code 5.71 .99 7.21 1.34 1.34 .99 .28 .28 the date code consists of: day of the current year (julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) this footprint represent s a recommendation only dimensions shown are nominal in millimeters tape and reel section a-a 0.3 2.2 7.3 5.8 ?1.5 8.0 4.0 2.0 a a ?1.5 16.0 7.5 1.75 id dot 2.0 ?13.0 ?20.2 ?330 16.8 2.7 direction of travel ?102 dimensions shown are nominal in millimeters packaging quantity: 3000 units/reel
data sheet part number 856582 172.8 mhz saw filter subject to change or obsolescence without notice rev a 06-07 triquint semiconductor, inc. ? page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t -40 +85 o c storage temperature range t stg -40 +85 o c important notes warnings ? electrostatic sensitive device (esd) ? avoid ultrasonic exposure rohs compliance ? this product complies with eu directive 2002/95/ec (rohs) solderability ? compatible with jedec j-std-020c pb -free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquint?s liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint do es not accept any liability for applications, processes, circuits or assemblies which are implemented using any triquint component described in this data s heet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
