View ACFM-7110_8504410.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ACFM-7110 pcs/cellular band quadplexer data sheet description the avago technologies ACFM-7110 is a quadplexer that combines pcs and cellular duplexers into a single, miniature package. the ACFM-7110 features a single antenna connection, eliminating the need for antenna switching. all ports are matched to 50 ohms. the ACFM-7110 is designed with avago technologies film bulk acoustic resonator (fbar) technology. the ACFM-7110 also utilizes avago technologies innovative microcap bonded-wafer, chip scale packaging technol- ogy. this process allows the ?lters to be assembled in a module with a footprint of only 3 x 5 mm and maximum height of 1.05 mm. low tx insertion loss of the ACFM-7110 reduces power ampli?er current, extending battery life and talk time. the ACFM-7110 enhances receiver sensi tivity and dynamic range with low rx insertion loss and high rejection of tx signals at the rx ports. the excellent power handling capability of avago tech- nologies fbar bulk-mode resonators supports the high tx output power levels needed in handsets while adding virtually no distortion. functional block diagram features ? single antenna ? all ports matched to 50 ohms ? miniature size C 3 x 5 mm footprint C 1.05 mm max height ? high power rating C +33 dbm max tx power ? environmental C rohs compliant C halogen free C tbbpa free speci?cations ? performance guaranteed -20 to +85 c ? cellular duplexer rx (869 C 894 mhz) C insertion loss: 3.5 db max (25 c) C noise blocking: 45 db min ? cellular duplexer tx (824 C 849 mhz) C insertion loss: 2.8 db max (25 c) C interferer blocking: 55 db min ? pcs duplexer rx (1930.5 C 1989.5 mhz) C insertion loss: 3.4 db max (25 c) C noise blocking: 45 db min (25 c) ? pcs duplexer tx (1850.5 C 1909.5 mhz) C insertion loss: 2.9 db max (25 c) C interferer blocking: 54 db min applications ? handsets or data terminals oper ating in the pcs and cellular frequency bands ant cell rx cell tx port 5 port 1 port 4 pcs tx port 2 pcs rx port 3
2 ACFM-7110 electrical speci?cations, z 0 = 50 , t c [1, 2] as indicated symbol parameter units -20 c +25 c +85 c min max min typ [3] max min max cellular duplexer performance antenna port to cellular receive port s41 insertion loss in rx band (869C894 mhz) db 3.6 1.9 3.5 3.6 s41 insertion loss ripple (p-p) in rx band (869 C 894 mhz) db 1.0 1.5 s41 attenuation in tx band (824 C 849 mhz) db 50 50 66 50 s41 attenuation, 0 C 804 mhz db 25 25 25 s41 attenuation in tx 2 nd harmonic band (1648 C 1698 mhz) db 30 30 30 s41 attenuation in tx 3 rd harmonic band (2472 C 2547 mhz) db 19 19 19 s44 return loss (swr) of rx port in rx band (869 C 894 mhz) db 8 (2.3) 8 15 (1.4) (2.3) 8 (2.3) s11 return loss (swr) of ant port in rx band (869 C 894 mhz) db 8 (2.3) 8 18 (1.3) (2.3) 8 (2.3) cellular transmit port to antenna port s15 insertion loss in tx band (824 C 849 mhz) db 2.9 1.6 2.8 2.9 s15 insertion loss ripple (p-p) in tx band (824 C 849 mhz) db 0.8 1.5 s15 attenuation in rx band (869 C 894 mhz) db 40 40 56 40 s15 attenuation, 0 C 804 mhz db 20 20 20 s15 attenuation in gps band (1574.4 C 1576.4 mhz) db 30 30 30 s15 attenuation in tx 2 nd harmonic band (1648 C 1698 mhz) db 20 20 20 s15 attenuation in tx 3 rd harmonic band (2472 C 2547 mhz) db 8 8 8 s55 return loss (swr) of tx port in tx band (824 C 849 mhz) db 9 (2.1) 9 16 (1.4) (2.1) 9 (2.1) s11 return loss (swr) of ant port in tx band (824 C 849 mhz) db 9 (2.1) 9 22 (1.2) (2.1) 9 (2.1) isolation, cellular transmit port to cellular receive port s45 isolation, tx to rx port in rx band (869 C 894 mhz) db 45 45 59 45 s45 isolation, tx to rx port in tx band (824 C 849 mhz) db 55 55 64 55
3 ACFM-7110 electrical speci?cations, z 0 = 50 , t c [1, 2] as indicated symbol parameter units -20c +25c +85c min max min typ [3] max min max pcs duplexer performance antenna port to pcs receive port s31 insertion loss in rx band (1930.5 C 1989.5 mhz) db 3.6 1.7 3.4 3.6 s31 insertion loss ripple (p-p) in rx band db 1.1 2 s31 attenuation in tx band (1850.5 C 1909.5 mhz) db 50 50 61 50 s31 attenuation, 0.03 C 1770 mhz db 20 20 20 s31 attenuation, 2025 C 3500 mhz db 30 30 30 s31 attenuation, 3500 C 3700 mhz db 27 27 27 s31 attenuation, 3820 C 4000 mhz db 23 23 23 s33 return loss (swr) of rx port in rx band (1930.5 C 1989.5 mhz) db 9 (2.1) 9 18 (1.3) (2.1) 9 (2.1) s11 return loss (swr) of ant port in rx band (1930.5 C 1989.5 mhz) db 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) pcs transmit port to antenna port s12 insertion loss in tx band (1850.5 C 1909.5 mhz) db 3.1 1.3 2.9 3.1 s12 insertion loss ripple (p-p) in tx band db 0.8 2 s12 attenuation in rx band (1930.5 C 1989.5 mhz) db 40 40 54 40 s12 attenuation, 0.03 C 1570 mhz db 15 15 15 s12 attenuation in gps band (1574.4 C 1576.4 mhz) db 30 30 30 s12 attenuation, 1580 C 1700 mhz db 25 25 25 s12 attenuation in tx 2 nd harmonic band (3701 C 3819 mhz) db 10 10 10 s12 attenuation in tx 3 rd harmonic band (5551.5 C 5728.5 mhz) db 3 3 3 s22 return loss (swr) of tx port in tx band (1850.5 C 1909.5 mhz) db 9.5 (2.0) 9.5 18 (1.3) (2.0) 9.5 (2.0) s11 return loss (swr) of ant port in tx band (1850.5 C 1909.5 mhz) db 9 (2.1) 9 20 (1.2) (2.1) 9 (2.1) isolation, pcs transmit port to pcs receive port s32 isolation, tx to rx port in rx band (1930.5 C 1989.5 mhz) db 40 45 60 45 s32 isolation, tx to rx port in tx band (1850.5 C 1909.5 mhz) db 54 54 65 54 notes: 1. t c is de?ned as case temperature, the temperature of the bott om mounting surface of the quadplexer where it makes contact with th e circuit board. 2. min/max speci?cations are guaranteed at the indicated tempera ture with the input power to the tx ports equal to or less than +27 dbm over all tx frequencies unless otherwise noted. 3. typical data is the arithmetic mean value of the parameter over its indicated frequency range at the speci?ed temperature. t ypical values may vary over time.
4 absolute maximum ratings [1] parameter unit value storage temperature c -65 to +125 maximum rf input power to tx ports dbm +33 maximum recommended operating conditions [2] parameter unit value operating temperature, tc [3] , tx power 29 dbm c -40 to +100 operating temperature, tc [3] , tx power 30 dbm c -40 to +85 notes: 1. operation in excess of any one of these conditions may result in permanent damage to the device. 2. the device will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical speci?cations. 3. t c is de?ned as case temperature, the temper ature of the bottom mounting surface of the quadplexer where it makes contact with the circuit board.
5 ACFM-7110 typical performance at t c = 25 c figure 1. pcs tx band insertion loss. figure 2. pcs rx band insertion loss. figure 3. pcs tx rejection in rx band and rx rejection in tx band. figure 4. pcs txCrx isolation. figure 5. pcs tx and rx port return loss. figure 6. pcs antenna port return loss. -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 1850 1860 1870 1880 1890 1900 1910 insertion loss (db) frequency (mhz) -70 -60 -50 -40 -30 -20 -10 0 1750 1800 1850 1900 1950 2000 2050 2100 insertion loss (db) frequency (mhz) -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 1750 1800 1850 1900 1950 2000 2050 2100 return loss (db) frequency (mhz) -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 1930 1940 1950 1960 1970 1980 1990 insertion loss (db) frequency (mhz) -80 -75 -70 -65 -60 -55 -50 -45 -40 -35 -30 1750 1800 1850 1900 1950 2000 2050 2100 insertion loss (db) frequency (mhz) -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 1750 1800 1850 1900 1950 2000 2050 2100 return loss (db) frequency (mhz)
6 ACFM-7110 typical performance at t c = 25 c figure 7. cellular tx insertion loss. figure 8. cellular rx insertion loss. figure 9. cellular tx rejection in rx band and rx rejection in tx band. figure 10. cellular txCrx isolation. figure 11. cellular tx and rx return loss . figure 12. cellular band antenna return loss. -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 870 875 880 885 890 895 insertion loss (db) frequency (mhz) -90 -85 -80 -75 -70 -65 -60 -55 -50 -45 -40 800 850 900 950 insertion loss (db) frequency (mhz) -70 -60 -50 -40 -30 -20 -10 0 800 850 900 950 insertion loss (db) frequency (mhz) -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 800 850 900 950 return loss (db) frequency (mhz) -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 800 850 900 950 return loss (db) frequency (mhz) -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 825 830 835 840 845 850 insertion loss (db) frequency (mhz)
7 figure 14. pcs rx port impedance in rx band (1930C1990 mhz). figure 16. ant port impedance in pcs rx band (1930C1990 mhz). figure 13. pcs tx port impedance in tx band (1850C1910 mhz). figure 15. ant port impedance in pcs tx band (1850C1910 mhz). ACFM-7110 typical performance at t c = 25 c 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.6 0.8 1 0.6 0.8 1 0.4
8 figure 18. cell rx port impedance in rx band (869C894 mhz). figure 20. ant port impedance in cell rx band (869C894 mhz). figure 17. cell tx port impedance in tx band (824C849 mhz). figure 19. ant port impedance in cell tx band (824C849 mhz). ACFM-7110 typical performance at t c = 25 c 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.4 0.6 0.8 1 0.6 0.8 1 0.2 1.5 2 3 4 5 10 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 20 0.6 0.8 1 0.6 0.8 1 0.4
9 figure 21. package outline drawing. ACFM-7110 figure 22. package marking ACFM-7110 = part number fb = mfg information y = year ww = work week dd = date code xxxx = assembly lot 0.90 3.90 4.80 1.40 2.80 2.40 4.80 pcs rx cell tx ant cell rx pcs tx 0.35 0.35 0.95 0.65 orientation mark 5.0 0.95 (1.05 max) 3.0 0.1 (all around) 0.20 x 45 (2 pls) 0.025 x 45 (6 pls) detail of io pad areas bottom view top view side view notes: 1. dimensions in mm tolerance: x.x 0.1 mm x.xx 0.05 mm x.xxx 0.010 mm 2. dimensions nominal unless otherwise noted 3. angles 45 nominal 4. i/o pads (5 ea) size: 0.35 x 0.35 mm spacing to ground metal: 0.30 mm 5. contact areas are gold plated pcs tx cell rx pcs rx cell tx ant package orientation avago ACFM-7110 fbywwddxxxx
10 figure 23. ACFM-7110 footprint, dimensions in mm (top view). ACFM-7110 3.90 4.80 1.40 2.80 2.40 0.90 0.35 x 0.35 figure 24. suggested pcb layout, dimensions in mm (top view). 1.50 3.00 (ref) 1.00 4.00 5.00 (ref) 2.50 0.30 0.35 0.95 ? 0.30 via array horiz pitch = 0.53 vert pitch = 0.45 package outline
11 figure 25. smt tape packing (12 mm tape). ACFM-7110 figure 26. orientation in tape. 9 max 9 max 3.25 0.10 5.25 0.10 1.30 0.10 5.50 0.05 1.75 0.10 8.00 0.10 ? 1.50 0.10 12.0 0.30 C0.10 ? 1.50 0.25 2.00 0.05 4.00 0.10 a. k. b. 0.28 0.02 pocket cavity sprocket holes package orientation avago acfm-7xxx affymmddxxxx avago acfm-7xxx affymmddxxxx avago acfm-7xxx affymmddxxxx avago acfm-7xxx affymmddxxxx avago acfm-7xxx affymmddxxxx avago acfm-7xxx affymmddxxxx
12 detail x recycle symbol see detail x embossed line x2 90.0mm length lines 147.0mm away from center point esd label (see below) front back front view back view recycle symbol embossed m 5.0mm height slot 10.00.5(2x) slot 5.00.5***(1x) detail y 30.4* max ?100.00.5 ?331.5 max detail x +0.5 2.20.5 ?20.2 (min) ?13.1 -0.2 25.41.0* 25.651.75** ACFM-7110 figure 27. reel drawing. notes: 1. reel (coated with proprietary antistatic agent), 10^9 to 10^11 ohm / sq 2. carrier tape (carbon polystyrene), 10^9 ohm / sq 3. cover tape, 10^10 to 10^11 ohm / sq top layer C transparent pet ?lm bonding layer C adhesive polyole?n sealing layer C peelable special ?lm no. color surface resistivity 1. pantone 285u dark blue antistatic coated 10 6 C10 10 per ohms square 2. black conductive <10 6 per ohms square 3. white antistatic impregnated 10 6 C10 10 per ohms square 4. pantone 3295c dark green antistatic coated 10 6 C10 10 per ohms square 5. black antistatic coated 10 6 C10 10 per ohms square 6. pantone 278c light blue antistatic coated 10 6 C10 10 per ohms square 7. white antistatic coated 10 6 C10 10 per ohms square 8. natural antistatic coated 10 6 C10 10 per ohms square 9. pantone 298cC299c dull light blue antistatic coated 10 6 C10 10 per ohms square note: x in part numbering denotes colour code.
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2011 avago technologies. all rights reserved. av02-2891en - march 28, 2011 ACFM-7110 package moisture sensitivity feature test method performance moisture sensitivity level (msl) at 260 c j-std-20c level 3 0 50 100 150 200 250 300 time, seconds 0 50 100 150 200 250 300 temperature, c profile.grf profile. wmf 6 february 2003 r. waugh tested pro?le shown. figure 28. veri?ed smt solder pro?le. part number no. of devices container ACFM-7110-blk 100 tape strip or anti-static bag ACFM-7110-tr1 3000 330 mm (13-inch) reel

▲Up To Search▲

Price & Availability of ACFM-7110

	To Download ACFM-7110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .