rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14031 9 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . rf micro devices ? and rfmd ? are trademarks of rfmd, llc. bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks, and registered trademarks are the property of their respective owners. ?20 13, rf micro devices, inc. 1 of 4 os10040320pw gaas optical receiver 4 0 mhz to 1 0 00 mhz the os10040320pw is a hybrid high dynamic range optical receiver amplifier module. two of the module pins are for connection to 24v (dc), one for amplifier supply vol tage, the other for the pin diode bias. the module contains a single mode optical input suitable for wavelengths from 1290nm to 1600nm, a terminal to monitor the pin diode current, and an electrical output with an impedan ce of 75 . package: sot - 115j features superior r eturn loss performance extremely low distortion optimal reliability very low einc standard catv outline excellent flatness 260 ma max. at 24v + applications 4 0 mhz to 1 0 00 mhz cat v amplifier system s ordering information os10040 32 0gw - 012 box with 3 pieces os10040 32 0gw - 013 box with 3 pieces os10040 32 0gw - 014 box with 3 pieces os10040 32 0gw - 015 box with 3 pieces os10040 32 0gw - 016 box with 3 pieces os10040 32 0gw - 017 box with 3 pieces s ee page 3 os10040320pw v + optical input output bias monitor
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14031 9 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwis e under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 4 os10040320pw absolute maximum rat ings parameter rating unit frequency range 40 to 1000 mhz optical input power (continuous) 5 mw esd sensitivity according to mil standard 1686c (human body model; r = 1.5k, c = 100pf) 500 v storage temperature - 40 to +85 c operating mounting base temperature - 20 to +85 c minimum fiber bending r adius 35 mm maximum tensile s trength 5 n caution! esd sensitive device. rohs (restriction of hazardous substances): compliant per eu directive 2011/65/eu. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical performance or functional operation of the device under absolute maximum r ating conditions is not implie d. nominal operating parameters parameter specification unit condition min typ max general performance v + = 24 v; t mb = 30c; z l = 75 responsivity 3000 3150 v/w f = 10 00mhz, = 1310nm slope [1] 0 2.0 db f = 4 0 mhz to 1 0 00mhz flatness of o/e response <0.7 1.0 db f = 4 0 mhz to 1 0 00mhz (measured peak to valley) optical input return loss 45.0 db output return loss 15.0 17.0 db f = 4 0 mhz to 1 0 00mhz equivalent input noise 4.5 5.0 pa/ hz f = 40 mhz to 400 mhz 5.0 5.5 pa/ hz f = 4 00 mhz to 1 0 00mhz spectral sensitivity 0.88 a/w = (1310 20) nm 0.90 a/w = (1550 20) nm optical w avelength 1290 1600 nm total current consumption (dc) 255 260 ma module pin 4 and 5 connected to v + photo d iode bias current 6.0 10.0 ma distortion data v+ = 24v; t mb = 30c; z l = 75 second order distortion [ 2 ] - 75 - 70 dbc fm = 54mhz; f1 = 187.25mhz; f2 = 133.25mhz - 72 - 67 dbc fm = 446.5mhz; f1 = 97.25mhz; f2 = 349.25mhz - 70 - 65 dbc f m = 548.5mhz; f1 = 109.25mhz; f2 = 439.25mhz - 65 - 61 dbc f m = 746.5mhz; f1 = 133.25mhz; f2 = 613.25mhz - 64 - 60 dbc f m = 854.5mhz; f1 = 133.25mhz, f2 = 721.25mhz third order distortion [ 3 ] - 75 - 70 dbc f m = 55.25mhz; f1 = 109.25mhz; f2 = 133.25mhz; f3 = 187.25mhz - 75 - 70 dbc f m = 445.25mhz; f1 = 193.25mhz; f2 = 349.25mhz; f3 = 97.25mhz. - 72 - 68 dbc f m = 547.25mhz; f1 = 217.25mhz; f2 = 439.25mhz; f3 = 109.25mhz - 72 - 67 dbc f m = 745.25mhz; f1 = 133.25mhz; f2 = 265.25mhz; f3 = 613.25mhz - 72 - 67 dbc f m = 853.25mhz; f1 = 133.25mhz; f2 = 265.25mhz; f3 = 721.25mhz 1. slope is defined as the difference between the o/e response at the start frequency and the o/e response at the stop frequency . 2. two laser test; each laser with 40% omi; popt = 1mw (total). 3. three laser test; each laser with 60% omi; popt = 1mw (total).
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14031 9 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwis e under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 4 os10040320pw cable lengths and connector types tab dimension a optical connector type inches tolerance mm tolerance - 012 33.4 - 4 to +0.5 848 - 102 to +13 fc/apc - 013 33.4 - 4 to +0.5 848 - 102 to +13 sc/apc - 014 37.5 - 3.5 to +0.5 952 - 89 to +13 fc/apc - 015 37.5 - 3.5 to +0.5 952 - 89 to +13 sc/apc - 016 21.1 - 1.5 to +0.5 536 - 38 to +13 fc/apc - 017 21.1 - 1.5 to +0.5 536 - 38 to +13 sc/apc cable lengths and connector types (continued) tab dimension b inches mm - 012 no outer jacket - 013 no outer jacket - 014 0. 325 to 0. 550 8.3 to 14 .0 - 015 0.325 to 0. 550 8.3 to 14 .0 - 016 0.32 5 to 0. 550 8.3 to 14 .0 - 017 0.32 5 to 0. 550 8.3 to 14 .0
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds 14031 9 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwis e under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 4 os10040320pw package drawing (dimensions in millimeters)
|
