View W58-124-9019910_8611566.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

75 ohm connectors customer support locations americas 100 new wood road watertown, ct 06796 tel: 860.945.0206 toll free: 800.683.7666 fax: 860.645.0303 asia unit 901 & 912, west tower, shun t ak center 168-200 connaught road central, hong kong t el: +852.2732.2720 fax: +852.2732.2919 europe jays close, viables estate basingstoke, hants, rg22 4ba tel: +44.1256.311850 f ax: +44.1256.332214 www.ittcannon.com ?007 it t corporation. ngineered for life?nd ?anon?ar registered trademarks of itt corporation. specification and other data are based on information available at the time of printing, and are subject to change without notice. 75o-04-07 cannon 75 ohm connectors electronic components
cannon 75 ohm connectors 2 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change qt bnc type 43 (smz) 1.0/2.3, type 54 1.6/5.6 frequency range 0 to 2 ghz 0 to 3 ghz 0 to 2 ghz 0 to 1 ghz impedance 75 ohm nominal 75 ohm nominal 75 ohm nominal 75 ohm nominal operating temperature -40?c - 85?c 40?c - 185?c -40?c - 85?c 40?c - 185?c -40?c - 85?c 40?c - 185?c -40?c - 85?c 40?c - 185?c mating cycles 500 min 250 min 500 min 500 min mating method / coupling ba yonet / la tch sna p-on with posilock la tch sna p-on with push-pull la tch sna p-on with screwlock la tch cable t ermination qt* quick t ermina tion crimp/solder/ qt* quick termination crimp/solder crimp/solder cable t ype flexible flexible flexible flexible body material phosphor bronze brass or zamak brass or zamak brass body finish nickel nickel or gold nickel or gold nickel or gold page number 17 5 12 19 quick reference selection guide i tt electronic components is a division of the multi- national itt corporation a $7.5 billion dollar global enterprise. our extensive portfolio offers the most reli- able and cost effective range of interconnect solutions. these innovations have enabled itt to provide products a nd technologies to such markets as: ? aerospace ? broadcast ? computers systems ? defense electronics ? geophysical ? industrial automation ? medical electronics ? network systems ? telecom switching ? underwater systems ? wireless offering the broadest selections of standard and cus- tom rf interconnects, itt is the one stop source for design, development, manufacturing, and testing of sophisticated connectors. high performance 75 ohm connectors this 75 ohm rf catalog incorporates the most com- monly used connectors used in today's routing, switch - ing and transmission equipment. these include the popular t ype 43 (smz), 1.0/2.3, qt -bnc, and 1.6/5.6 c onnector families. in addition we have included a tool- ing section to simplify and ease the assembly our our connectors both in the factory and for field installa- tions. itt is an approved manufacturer to iso 9001 and iso 14001 with locations worldwide to serve ourc ustomers. the custom difference itts world class engineering teams will work directly with our customers to design and develop cost effective solutions for their applications . in many cases we may modify one of our standard designs to ensure a highly reliable solution where timing is critical. yet, in those cases where a complete custom interconnect solution is required, itt will work with our customers engineers to design an interconnect solution which will be cost effective yet highly reliable. in addition to custom connectors, itt of fers sophisti - cated custom cable assembly capabilities for a wide range of applications. our in house expertise trans - lates to our ability to integrate dif ferent technologies within a custom cable harness. packaging: p/n ending with last digit a see pa ge 18 25 pieces per tray 25 pieces per tray 25 pieces per tray
cannon 75 ohm connectors new electrical sfp transceiver for stm-1e applications from itt 3 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change ca ble number impedance ( ohm s) d iam eter of jacket d iam eter of out er conductor (max) d iam eter of d iel ectric (max) d iam eter of c enter c onductor (no m) bt2002* 75 5, 30 ( .209) 3, 81 ( .150) 2, 45 ( .096) 0 ,60 ( .024) bt2003* 75 6, 90 ( .272) 5, 06 ( .199) 3, 70 ( .146) 0 ,61 ( .024) bt3002 75 3, 5 5 ( .140) 2, 85 ( .112) 1, 95 ( .077) 0, 31 ( .012) m17/29 -rg59 75 6, 27 ( .247) 4, 85 ( .191) 3, 81 ( .150) 0, 56 ( .022) rd179* 75 3 ,07 ( .121) 2, 69 ( .106) 1, 68 ( .066) 0, 30 ( .012) rg 59/u 75 6 ,25 ( .246) 4, 85 ( .191) 3, 81 ( .150) 0 ,58 ( .023) rg 179/u 75 2, 67 ( .105) 2, 13 ( .084) 1, 68 ( .066) 0 ,30 ( .012) t zc75024 75 3, 5 5 ( .140) 3, 01 ( .119) 1, 95 ( .077) 0, 31 ( .012) 1694a 75 6 ,99 ( .275) 5, 4 4 ( .214) 4, 57 ( .180) 1 ,02 ( .040) 734 75 6 ,10 ( .240) 5, 21 ( .205) 3, 89 ( .153) 0 ,79 ( .031) 735a 75 3 ,51 ( .138) 2, 79 ( .110) 2, 01 ( .079) 0, 41 ( .016) * do uble sh ielded * * * * * 0.2 5/1.3* (mini coax ) 75 2, 10 (.083) 1 ,65 (.065) 1, 35 (.05 3) 0 ,25 (. 010) ra 7000 * 75 4 ,50 (.177) 3 ,40 (.134) 2, 80 (.110) 0 ,60 (.024) ra 8000 * 75 2 ,75 (.108) 1 ,95 (.077 ) 1 ,45(.057) 0 ,31 (.012) 1855a * 75 4, 04 (.159) 3, 51 ( .138 ) 2, 59 (.102) 0 ,58 ( .02 3) connector/cable selection guide given here are details of all popular cables with which the connectors in this publication may be used. cable numbers suitable for use with all cable mounting connectors are given opposite the connector part numbers in the series chose. if the connector style is not shown against your selected cable, please contact customer service. designed to comply with the small form factor pluggable (sfp) industry-standard multi source agreement (msa), the new cannon sfp-155e? electrical transceiver from itt delivers full duplex stm-1 electrical (155 mbit/s) sdh transport over coaxial cables and are fully interchangeable with stm-1 optical sfp's. any system that already supports stm-1 optical can now support stm-1 electrical by using the sfp-155e. more importantly a single circuit card can now support both optical and electrical stm-1 interfaces, reducing system capital and operating costs. the elec- trical interface is fully compliant with telecom itu-t g.703 (es1) recommendations and can be connected using standard din 1.0/2.3 75 ohm cable connectors.the sfp-155e enables systems designers to reduce time-to-market at a lower cost, and with full flexibility. serial identification (eeprom) in accordance with the sfp msa is available. typical applications include next generation sdh add/drop mul- tiplexers, optical edge devices, mspp and switching systems. contact customer service for more information on this product. t able of contents type 43 (smz) page 5 1 .0/2.3 page 12 balun page 16 qt-bnc page 17 1.6/5.6 page 19 tooling page 22
cannon 75 ohm connectors qt quick termination 4 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change qt = uick termination of coaxial connectors qt = 3:1 reduction in assembly time qt = no crimping or soldering of the center contact qt = no special tooling required qt = simplified assembly qt = fewer wasted parts qt = reduced tooling maintenance and calibration qt = pre-assembled center contact qt = a reliable, high pressure, gas tight joint several innovative concepts and technologies are used in our qt designs. the primary technological feature is a captivated center pin that provides a high pressure gas tight joint of exceptional mechanical and electrical integrity on solid center conductors; termination is achieved without crimping or soldering to the cables center conductor. the cable center conductor is terminated to the inner contact within the connector assembly by acti- vating the qt (patented) mechanism using the simple plastic tool provided. connectors referenced in this catalog with "qt" have this technology. the assembly is completed in 4 simple steps: step 1: strip cable step 2: assemble connector onto cable step 3: press insulator into the body using the plastic tool provided step 4: crimp the ferrule using a standard crimp tool t he qt (quick termination) 75 ohm connector series was designed to meet the rigorous specifications of the telephony, broadcast and data communications industry. with only two components to handle, our qt connectors are easier to terminate than the current industry standard products while providing reliable elec- trical and mechanical performance. qt connectors were first installed on 140mbit lines in an international telecommunications exchange over 15 years ago, and since that day itt have supplied over 30 million qt connectors into many of the worlds leading networks. 1 2 3 4 for high volume terminations, some styles can also be assembled using dedicated hand or pneumatic bench tooling. qt connectors provide large productivity savings, high quality and premium performances... all at a competitive price. patent protected
cannon 75 ohm connectors type 43 (smz) 5 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change i tts wide range of cannon type 43 / smz connectors are exten- sively used in 75 ohm communication systems and have become the recognized standard in telecommunications in many parts of the world. d esigned around the requirements of bs9210 f0022 and draft specifications cecc 122 300, these connectors are designed for field installation and feature the osi--ock latch to prevent acci- dental disconnection. a special feature of the cannon type 43 / smz range is the qt (quick termination) technology for cable connectors. designed to reduce assembly time and loose parts, the qt termination system incorporates a connector body with a pre-assembled center contact, termination is simple with no loose contact to drop or lose. qt pro- vides a reliable gas tight connection between the inner conductor of the cable and connector contact that meets the most stringent industry standards. for pcb connectors a snap fit feature is incor- porated into certain styles to hold the connector in position during soldering. choice of two latching styles Cstandard or hdc (high density) itts cannon type 43 / smz connectors are available in 2 package sizes, standard and hdc (high density). whilst both configurations have the same interface dimensions and are intermateable, the outer body size of hdc is reduced to facilitate a closer packing density on the equipment or distribution frame. featur es and benefits high performance gold plated contact areas ensure reliable long term operation posi-lock locking mechanisms ensure secure coupling and ease of engagement and separation designed for the most commonly used telecom cables in north america and europe designed for robust and reliable field installation a vailable for bt standard and hdc distribution frames three-part construction with crimp inner contact and outer ferrule (no soldering required) pcb plugs come with of fset legs for board locking qt (quick termination) technology available for most cable types product offering includes u-links and between series adaptors t rue 75 ohm characteristic imped - ance up to 3 ghz (for selected styles) most designs require no special tooling "t eplock" mounting reduces the time needed for fitting to ddf's rohs compliant part numbers applications ? switching equipment ?dsx cross connects ??ase stations ?r?uters ?w ireless ? t elecom ?lan equipment
cannon 75 ohm connectors type 43 (smz) 6 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change smz e lec trical i mpe dance 7 5 n ominal frequ enc y r ange 0 to 3. 0 ghz (so me styl es l imi ted to 1.0g hz) work ing v olt age (dc or ac peak) at s ea level, inne r condu ctor to sh ell = 500 v proof volta ge (dc or ac p eak) at s ea level = 15 0 0 v i nsulati on res istance 5 g m inimum c ontact resistance* c enter co ntact: 5 .0m maximum . outer con tact : 1. 0m maximum r eflection coeffi cie nt r efer to c ecc1 2 23 0 0 c urr ent ra ting 1.5 a dc max imum mech anical engag em en t fo rces all sna p-o n, sc rew-l ock & posi- loc k style s exce pt u links = 60 n (13. 5 lb s.) max imum u links (redu ced for ce sna p-o n) = 40 n (9 l bs. ) ma ximum sepa ration forces all sn ap-on, sc rew-loc k & po si- lock sty les exc ept u l inks = 60 n (13. 5 lb s.) max, 8 n (1.8 lbs.) min. u links (redu ced force sna p-o n) = 4 0 n (9 l bs. ) ma xim um, 20 n ( 4.5 lb s.) minim um posi-lock l atch withstan d pull 220 n (50 lbs.) c ont act and insulator rete ntion 2 1 n (4. 7 lb s.) materia ls bod y co mpo nen ts: co p pe r o r zi nc allo y. cent er cont act s (mal e/fe male ): c opp er a l loy. insula tor s: p tfe or t herm ose t pl ast ic. cr imp ferr ules : an neal ed coppe r al loy finish/p lating c enter co ntacts: gold . outer con tact s: gold . ot her meta l pa rts: ni cke l, t in o r zi nc environm ental vibration sever ity ( a) f requ ency r ange : 10 hz to 500 h z. (b) dis pla ceme nt** : 0,75 ( .02 9). (c ) a c cel erat ion** : 2 98 m/s (32 1 ft./s 2 ). (d) duration : 6 ho urs . ** cr oss ov er at appr ox. 60 hz shock seve rity 4 90 m/s 2 for 11 ms impact sev erity (free sp ecim ens only) 5 i mpacts at 1 m c lima tic catagory 4 0/1 00 /21 bump 4 0 00 total at 390 m/s 2 fre e fall (u link only) bs 2011 : part 2.1 ed. p roc edu re 2. sev eri ty: 50 f alls general c onn ect or dur abi lity 2 50 ma tin gs mini mum *except u link c onnec tor s. see b s9210 f0022 for de tail s. notes 1) values in this specifica tio n are ty pical f or t his rang e. s pecific co n ne cto rs may var y. 2 ) c ann on 75 ohm coax ial connnect ors are des ign ed t o meet or exceed the re quir em ent s of bs9 210f00 2 2 wher e ap pli cab le. this specificatio n may be sup erseded by ce cc 122 300 a nd t he d etails l ist ed ab ove are sub ject to cha nge w itho ut no tic e to comp ly with ch anges in these spec if ications. jack pl ug specifications plug socket please note that the description of the 2 halves follow the uk telecom format. in other regions a plug may be called a jack, and a socket may be called a plug. please take care when choosing your connectors. mating interfaces
cannon 75 ohm connectors type 43 (smz) 7 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change contact customer service for other cable types part number cable type industry reference 051-127-9739a9a bt2001 p43/1gtis 051-127-9749a9a bt2002 p43/2gtis 0 51-127-9759a9a b t2003 p 43/3gtis 051-127-9769a9a bt3002 / tzc75024 p43/5gtis 051-127-9479a9a ra7000 p43/7gtis 051-127-9779a9a rg179b/u p43/4gtis d df crimp plug part number cable type industry reference w51-127-9439a9a bt2003 bt43/3gtiqt w51-127-9459a9a bt3002 / tzc75024 bt43/5gtiqt w51-127-9479a9a ra7000 w51-127-9059a9a ra8000 w51-127-9289a9a ncx w51-127-9049a9a 735a w51-127-9369a9a st212 / ct1320/735a (alt) w51-127-9789a9a rg59b w51-127-9039a9a 2.5c-2v w51-127-91 19a9a 0.25/1.3 (mini coax) ddf qt plug part number cable type industry reference w51-124-953991a bt2003 s43/3fqt w51-124-963991a bt3002/tzc75024 s43/5fqt w51-124-960991a ra7000 s43/7fqt w51-124-947991a ra8000 s43/8fqt w51-124-996991a 735a w51-124-944991a ncx w51-124-943991a st212 / ct1320/735a (alt) w51-124-966991a rg59u w51-124-950991a 2.5c-2v w51-124-999991a 0.25/1.3 (mini coax) part number cable type industry reference 051-124-977991a bt2002 s43/2fs 051-124-978991a bt2003 s43/3fs 051-124-979991a bt3002 / tzc75024 s43/5fs 051-124-983991a rg179b/u s43/4fs 051-124-950991a 2.5c-2v 051-124-943991a st212/ct1320/735a posilock straight crimp socket posilock straight qt socket 33, 02 ( 1.300) s q . 9 , 0 4 ( 0 . 3 5 6 ) ? 9 , 1 4 ( 0 . 3 6 0 ) s q 9 , 0 4 ( 0 . 3 5 6 ) ~ 33.02 (1.3 0 0) ? 9 , 1 4 ( 0 . 3 6 0 ) 30,40 1.197 [ ] ? 1 0 , 1 0 0 . 3 9 8 [ ] ~ 30.40 ( 1.1 97) ? ( 0.398) 10.10 assembly instructions: bbai 1265 assembly instructions: bbai 1238 assembly instructions: bbai 1265 assembly instructions: bbai 1238
cannon 75 ohm connectors type 43 (smz) 8 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change part number cable type industry reference 051-128-922991a bt2002 s43/2c 051-128-923991a bt2003 s43/3c 051-128-924991a rg179b/u s43/4c 051-128-933991a bt3002/tzc75024 s43/5c 051-128-947991a ra7000 s43/7c 0 51-128-941991a r g59u 051-128-935991a 735a posilock right angle socket coaxial u links 2 1 , 2 5 0 . 8 3 7 [ ] 23 ,98 0 .944 [ ] ? 1 0 , 1 0 0 . 3 9 8 [ ] s q . 9 , 5 2 0 . 3 7 5 [ ] 1 2 , 9 3 0 . 5 0 9 [ ] 25,40 ( 1.000) 12,70 (0.500) 9,96 ( 0.3 92) 1 9 , 7 9 ( 0 . 7 7 9 ) 25,40 ( 1.00) 37,08 (1.46 0) 1 9 , 7 9 ( 0 . 7 7 9 ) 12,70 (0.500) 9,96 ( 0.3 92) hole p att ern 5,08 (0. 200) 5 , 0 8 ( 0 . 2 0 0 ) sq. 7, 92 (0.3 12) s q . 4 p l c s . 1 , 0 2 ( 0 . 0 4 0 ) 11, 38 (0 .44 8) 3 ,94 (0.155) ? 0 , 9 7 ( 0 . 0 3 8 ) ? 4 p l c s . 1 , 7 0 + 0 , 1 5 0 ( 0 . 0 6 7 ) + 0 . 0 0 5 - 0 . 0 0 0 ? 1 ,17 + 0,18 0 (0 .046) + 0.007 - 0.000 5,08 ( 0.2 0 0) 5 , 0 8 ( 0 . 2 0 0 ) straight pcb plug part number 051-151-9019a9a 055-181-9079az0 link 13a (without monitor port) 055-181-9119az0 link 13b (with -30db monitor port) assembly instructions: bbai 1041 contact customer service for other cable types part number industry reference
cannon 75 ohm connectors type 43 (smz) 9 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change straight screw-lock pcb plug part number 051-151-9029a9a straight bulkhead pcb plug part number 051-151-9079a9a a0023384 panel mounting hardware kit (w asher and lock nut) right angle pcb plug part number 051-153-9089a9a plug 43/1e right angle bulkhead pcb plug with board retaining legs part number 051-153-9119eaa b0023382 panel mounting hardware kit (spacer, washer, lock washer, lock nut) h ole pa t ter n. 5/16-32 unef-2 a thd 5,08 (0. 200) 9 .53 hex (0.3 75) 1 . 0 2 s q ( 0 . 0 4 0 ) 4 p l c s . ? 0 . 9 7 ( 0 . 0 3 8 ) 3.93 (0.155) 8.38 (0.330) 1 3.46 (0.530) 5 , 0 8 ( 0 . 2 0 0 ) ? 4 p l c s . 1 , 7 0 + 0 , 1 5 0 ( 0 . 0 6 7 ) + 0 . 0 0 5 - 0 . 0 0 0 ? 1 ,17 + 0,18 0 (0 .046) +0.007 - 0.000 5,08 ( 0.2 0 0) 5 , 0 8 ( 0 . 2 0 0 ) h ole pa t ter n. ? 1 ,17 + 0,18 0 (0 .046) +0.007 - 0.000 11,75 (0.463) 15,75 ( 0.6 20) 1 4 , 2 0 ( 0 . 5 5 9 ) 3 , 7 1 ( 0 . 1 4 6 ) ? 0, 97 ( 0.0 38) 6 , 3 0 ( 0 . 2 4 8 ) 5 , 0 8 ( 0 . 2 0 0 ) 5,08 (0. 200) s q . 8 , 0 0 ( 0 . 3 1 5 ) sq. 4 plc s. 1,02 (0. 04 0) 5, 08 ( 0.2 0 0) 5 , 0 8 ( 0 . 2 0 0 ) ? 4 p l c s . 1 , 7 0 + 0 , 1 5 0 ( 0 . 0 6 7 ) + 0 . 0 0 5 - 0 . 0 0 0 h ole pa t ter n. 5 /16 - 3 2une f-2a 22, 21 (0.874) 18 ,24 (0.7 18) 12,50 (0 .492) 2, 39 (0.094) ? 0, 97 ( 0.0 38) 6 , 3 0 ( 0 . 2 4 8 ) 1 3 , 4 1 ( 0 . 5 2 8 ) 1 0 , 4 9 ( 0 . 4 1 3 ) sq. 4 places. 1,02 (0.040) 5 , 0 8 ( 0 . 2 0 0 ) 7 , 9 2 ( 0 . 3 1 2 ) 5, 08 ( 0.2 0 0) 5 , 0 8 ( 0 . 2 0 0 ) ? 4 p l c s . 1 , 7 0 + 0 , 1 5 0 ( 0 . 0 6 7 ) + 0 . 0 0 5 - 0 . 0 0 0 ? 1 , 1 7 + 0 , 1 8 0 ( 0 . 0 4 6 ) + 0 . 0 0 7 - 0 . 0 0 0 3,10 (0.1 2 2) hole pattern 5 /16 - 3 2une f-2a ? 0 , 9 7 ( 0 . 0 3 8 ) 25 ,86 ( 1.018) ? 9 , 5 2 ( 0 . 3 7 5 ) 13,64 ( 0.5 37) 8 ,94 ( 0.3 52) 4 pl aces. 1,02 (0. 04 0) 5,56 (0.2 19) 5 , 0 8 ( 0 . 2 0 0 ) 5 ,08 (0.200) ? 1 , 1 7 + 0 , 1 8 0 ( 0 . 0 4 6 ) + 0 . 0 0 7 - 0 . 0 0 0 ? 4 p l c s . 1 , 7 0 + 0 , 1 5 0 ( 0 . 0 6 7 ) + 0 . 0 0 5 - 0 . 0 0 0
cannon 75 ohm connectors hdc 43 (smz) 10 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change part number cable type industry reference w51-127-9929a9a bt2003 hdc43/3gtiqt w51-127-9909a9a bt3002 / tzc75024 hdc43/5gtiqt w51-127-9609a9a ra7000 hdc43/7gtiqt w51-127-9069a9a ra8000 hdc43/8gtiqt w51-127-9019a9a ncx w51-127-9029a9a 735a w51-127-9379a9a st212 / ct1320/735a (alt) w51-127-9109a9a 0.25/1.3 (mini coax) part number cable type industry reference 051-127-9849a9a bt2002 hdc43/2gtis 051-127-9859a9a bt2003 hdc43/3gtis 051-127-9879a9a rg179b/u hdc43/4gtis 051-127-9869a9a bt3002/tzc75024 hdc43/5gtis 051-127-9609a9a ra7000 hdc43/7gtis h dc43 ddf crimp plug hdc43 ddf qt plug part number cable type industry reference w51-124-937991a bt3002/tzc75024 hdc43/5fqt w51-124-929991a ra7000 hdc43/7fqt w51-124-9489c9a st212 / ct1320 / 735a nickel plated outer contact part number cable type industry reference 051-124-937991a bt3002/tzc75024 hdc43/5fs 051-124-929991a ra7000 hdc43/7fs 051-124-984991a rg179b/u hdc43/4fs 051-124-9489c9a st212 / ct1320/735a nickel plated outer contact 051-124-9849c9a rg179b/u nickel plated outer contact 051-124-9859c9a rd179 nickel plated outer contact hdc posilock straight crimp socket hdc posilock straight qt socket s q . 7 , 9 4 0 . 3 1 3 [ ] ? 7 , 4 4 0 . 2 9 3 [ ] 33.02 (1.300) 3 0,41 (1.197) ? 8 , 8 7 ( 0 . 3 4 9 ) 30,41 (1 .197) ? 8 , 8 7 ( 0 . 3 4 9 ) assembly instructions: bbai 1265 assembly instructions: bbai 1238 assembly instructions: bbai 1265 assembly instructions: bbai 1238 contact customer service for other cable types 33, 02 ( 1.300) s q . 7 , 9 4 ( 0 . 3 1 3 ) ? 7 , 4 4 ( 0 . 2 9 3 )
cannon 75 ohm connectors hdc 43 (smz) 11 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change hdc coaxial u links 9,40 (0.370) 1 0 , 0 0 ( 0 . 3 9 4 ) 1 9 , 1 0 ( 0 . 7 5 2 ) 12,70 (0.5 0 0) part number industry reference 055-181-9129az0 hdc link 10a (without monitor port) 055-181-9139az0 hdc link 10b (with -30db monitor port) l o op for extra cto r 1 0 , 0 0 ( 0 . 3 9 4 ) 1 2,70 ( 0.5 0 0) 23 ,77 ( 0.9 36) 9 ,40 (0.3 70) 1 9 , 1 0 ( 0 . 7 5 2 )
cannon 75 ohm connectors 1.0/2.3 12 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change the cannon 75 ohm 1.0/2.3 connector series are widely used in appli- cations requiring a high density solution and have become a standard in telecommunications in many parts of the world. designed to meet the requirements of din 47247 and cecc 22230, these connectors feature a push/pull coupling mechanism to ensure mating integrity and a snap-on interface for ease of connection. due to their small size these connectors can be densely packed while provid- ing significant space savings over other 75 ohm connector products. in addition, we offer the type 54 version of the 1.0/2.3 connector which meets the requirements of bt rc9333. the type 54 connector com- bines the 1.0/2.3 interface and push-pull locking system with the termi- nation methods and tooling benefits of the type 43 (smz) connector. our newest product offering for this connector series is the 1.0/2.3 hd (high density) connector. by re-engineering the latching mechanism we were able to successful reduce the size of the connector by 20% allowing even greater density than the standard 1.0/2.3 plug. applications ? switching equipment ?dsx cross connects ??ase stations ?r?uters ?w ireless ? telecom ?lan equipment features and benefits push-pull locking mechanism for secure coupling and ease of engagement and separation designed for the most commonly used cables in north america and europe new high density version with 6.2mm outside diameter three-part construction with crimp inner contact and outer ferrule (no soldering required) ideal for applications requiring a high density solution (space sav - ings) uses industry standard crimp tooling available in a type 54 configuration cable connectors designed for field installation high performance gold plated contact area ensures reliable long term operation din 1.0/2.3 1.0/2.3 - type 54 choice of 3 styles Cstandar d, high density or type 54 1.0/2.3 hd (high density) n e w 2 0 % s m a l l e r
cannon 75 ohm connectors 1.0/2.3 13 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change , r c9333 (t 54 o nly) 1,15 (.045) max 5,50 (.216) max ? 0,47/0,52 (.018/.020) 5,40/5,70 (.212/.224) ? 3,00/3,06 (.118/.120) 1,15/1,75 (.045/.069) ? 4,03/4,15 (.158/.163) 6,50 max (.255) 5,90 max (.232) m 5,5 x 0,5 1,15/1,75 (.045/.069) plug jack mating interfaces
cannon 75 ohm connectors 1.0/2.3 14 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change part number cable type d55-f28-3233a9a bt2003 d55-f28-3235a9a bt3002/tzc75024 d55-f28-3236a9a bt5000 d55-f28-3237a9a ra7000 d55-f28-3050a9a 735a part number cable type d55-f27-3035gea bt3002/tzc75024 d55-f27-3079gea rg179b/u part number cable type d55-f24-3022gda st212 / ct1320/735a (alt) d55-f24-3024gda st214 d 55-f24-3033gda b t2003 d55-f24-3035gda bt3002/tzc75024 d 55-f24-3037gda r a7000 d55-f24-3038gda ra8000 d55-f24-3049gda 734a d55-f24-3050gda 735a d55-f24-3052gda 0.4/2.42/4.07 d55-f24-3069gda 1855a / sdv-lfh d55-f24-3079gda rg179b/u 1.0/2.3 straight plug 1.0/2.3 straight bulkhead jack 1.0/2.3 right angle plug 1.0/2.3 straight pcb mount jack ~26. 0 0 ( 1.02 3) m ax ? 7. 70 ( .303) ~26. 0 0 ( 1.02 3) max ? 7.30 ( .287) ? 4.15 ( .163) m 5.5x 0.5 m ax. pa nel 2 .50 (.098) ~22. 0 0 ( .866) max 22. 0 0 (.866) max ? 7. 70 ( .303) 11. 0 0 ( .433) 6. 0 0 ( .236) 0. 95 (.03 7) 4 posns ? 4. 15 ( .163) ? 0.90 ( .03 5) 1 4,5 ( .571) part number d51-f51-9002gba assembly instructions: bbai 1269 assembly instructions: bbai 1281 assembly instructions: bbai 1041 contact customer service for other cable types part number cable type d55-f24-3922gda st212/ct1320/735a (alt) d55-f24-3935gda bt3002/tzc75024 d55-f24-3950gda 735a d55-f24-3979gda rg-179b/u 1.0/2.3 hd (high density) plug assembly instructions: bbai 1269 25,05 ( 0.986) 9 ,00 ( 0.3 54) ? 6 , 2 0 ( 0 . 2 4 4 ) n e w 2 0 % s m a l l e r
cannon 75 ohm connectors type 54 (1.0/2.3) 15 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change 1.0/2.3 right angle pcb mount bulkhead jacks m 5. 50x0 .50 2 1.00 ( .826) 1 7.50 ( .688) 1 2.00 ( .472) 7. 0 0 ( .275) 0.90 ( .035) 4 posns max. p a nel 2.00 (. 078) ? 0. 90 ( .035) ? 7. 25 ( .285) ? 4. 15 ( .163) 3 .50 (.13 7) 1 6.50 ( .64 9) 1 2.00 (.47 2) 7.40 (.29 1) 3 .70 (.14 5) 0 .40 (.01 5) 3 .20 ( .12 5) 0 .80 (.03 1) 0 .80 ( .03 1) m 5.5 x0.5 ? 4. 15 (.433) 5.08 (.200) p art number d51-f53-9015gba 1.0/2.3 straight pcb mount bulkhead jack part number cable t ype industry d55-f24-3133gda bt2003 plug 54/3b d55-f24-3135gda bt3002/tzc75024 plug 54/5b d55-f24-3136gda bt5000 plug 54/6b d55-f24-3137gda ra7000 plug 54/7b d55-f24-3138gda ra8000 plug 54/8b t ype 54 straight plug t ype 54 right angle plug part number cable type industry reference d55-f28-3233a9a bt2003 plug 54/3a d55-f28-3235a9a bt3002/tzc75024 plug 54/5a d55-f28-3236a9a bt5000 plug 54/6a d55-f28-3237a9a ra7000 plug 54/7a d55-f28-3238a9a ra8000 plug 54/8a ~22. 0 0 (.866) m ax 22. 0 0 ( .866) max ? 7. 70 ( .303) ~35.50 ( 1.39 7) max ? 7. 70 ( .303) d51-f53-9018gba (with lock nut) 051-f53-9059eaa b0023382 panel mounting hardware kit (spacer, washer, lockwasher, lock nut) 3 .50 (.13 7) 1 6.50 (.64 9) 1 2.00 (.47 2) 7 .40 (.29 1) 3 .70 (.14 5) 0 .40 (.01 5) 3 .20 (.12 5) 0 .80 (.03 1) 0 .80 (.03 1) m 5.5 x0.5 5.08 (.200) 1 .80 (.07 0) ? 4. 15 (.433) ? 7.3 (.28 7) assembly instructions: bbai 1265 assembly instructions: bbai 1041 p art number d51-f51-9006gba (with lock nut) 5/16-32 unef-2a ? 0,97 ( 0.0 38) ? m a x . 4 , 1 5 ( 0 . 1 6 3 ) 23 ,52 ( 0.9 26) 1 9,56 ( 0.770) 12,56 ( 0.4 94) 1 0 , 4 9 ( 0 . 4 1 3 ) 2 , 9 2 ( 0 . 1 1 5 ) 6 , 2 9 ( 0 . 2 4 8 )
cannon 75 ohm connectors telecom baluns 16 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change 75 ohm coa x. 120 ohm tw isted pair. circui t diagram ? ( . 3 0 3 ) 7 , 7 0 16,51 (0.650) 21,09 (0.830) s q . 9 , 4 5 ( 0 . 3 7 2 ) 3 1,21 ( 1.229) 4 3,00 1.693 part number 051-127-9989a9g type 43 (smz) plug balun 051-127-9999a9g hdc 43 (smz) plug balun 055-f24-9019a9g 1.0/2.3 push-pull plug balun balun itts telecom baluns, for use in itu g.703 applications, converts between a 120 ohm twisted pair and a 75 ohm coaxial transmission line. t hese balun connectors have the transformer built into the body, and can be quickly connected to screened or unscreened twisted pair cables through idc terminations, using a simple assembly tool. the small size allows these connectors to be mounted on a pitch of 10mm. the balun is ideal for use where it is necessary to interconnect equipment with 75 ohm coaxial outputs to a 120 ohm cable distribution system. the balun is only a little larger than the connector that it would replace. features and benefits idc termination quick and simple termination procedure small size meets g.703 standards rohs 5 compliant assembly instructions: bbai 1240 contact customer service if the style you require is not listed. specifications nominal impedance frequency range return loss 75 ohm and 120 ohm wire size coaxial 75 ohm twisted pair 120 ohm 50 khz - 10 mhz 51 - 102 khz >18db 102 - 2048 khz >25db 2048 - 3072 khz >23db 3072 - 10000 khz >16db conductor 0.5mm copper insulation 1.4mm ~43.00 ( 1.6 93) 16,51 (0.650) 29,75 ( 1.171) 21.09 (0.8 30) 9 . 4 5 ( 0 . 3 7 2 ) 43,00 1.693 16,51 (0.650) 21,09 (0.830) s q . 9 , 4 5 ( 0 . 3 7 2 ) 29,75 ( 1.171)
cannon 75 ohm connectors qt-bnc 17 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change this innovative termination technique provides the qt-bnc with a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping the center contact. the qt-bnc is a 75 ohm pre-assembled connector with an integral central contact and rear crimp ferrule. this connector may be t erminated onto cable in under 20 seconds, significantly reducing installation costs. applications ? central office switching ?cross connect equipment ?telecommunications features and benefits designed to simplify field installa- tions with less piece parts plastic rear cap is color coded for easy identification of cable type optional right angle strain relief boot accessory (show above) compatible with select competitive crimp tools and die sets telcordia audited and approved 3:1 reduction in assembly time than conventional 3 piece crimp bnc plugs rohs compliant part numbers specifications bump 4000 total at 390 m/s 2 cable retention cable axial force torque m17/29-rg59/ 133 n (30 lbs) min. 0,9 nm (8.0 in. lbs) 734 type 311 n (70 lbs) min. 0,9 nm (8.0 in. lbs) 735a type 1 1 1 n (25 lbs) min. 0,45 nm (4.0 in. lbs) bt3002 1 1 1 n (25 lbs) min. 0,45 nm (4.0 in. lbs) connector durability 500 mating cycles min. contact current rating 1.5 a dc max. contact/insulator retention 22,3 n (5 lbs) min. axial force contact resistance outer contact: 1.0 m max.; braid to body: 1.0 m max. corona level 375 v ac rms min. at 21 km (70,000 ft) coupling mechanism retention 445 n (100 lbs) min. dwv 1500 v ac rms at sea level frequency range dc to 2.0 ghz impedance 75 nominal insertion force 22,3 n (5 lbs) max. insertion loss 0.2 db max. at 2 ghz insulation resistance 5000 m min. operating temperature C0?to 85? ?0?Cto185f) operating voltage 500 v ac rms at sea level rf leakage C0 db typical up to 2 ghz shock 490 m/s 2 for 11 ms termination resistance (qt center contact) 3 m max. (excluding pole resistance) vibration (a) frequency range from 10 hz to 500 hz. (b) displacement: 0.75 (.029), (c) acceleration: 98 m/s 2 ,.(d) duration: 6 hours. vswr 1.2 max. (dc to 1 ghz); 1.3 max. (1 to 2 ghz) description material finish connector body phosphor bronze 3.5 m (140 in.) nickel insulators polymers rated to ul 94v-0 center contact male beryllium copper 1.27 m (50 in.) gold coupling nut die cast, copper zinc alloy 2.0 m (80 in.) nickel crimp ferrule annealed copper alloy 3.8 m (150 in.) nickel spring stainless steel
cannon 75 ohm connectors qt-bnc 18 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change p art number c ap color c able type W58-124-9019910 red 735a w58-124-901991a red 735a w 58-124-9019916 r ed 7 35a w58-124-9039910 yellow rg59b w58-124-9039916 yellow rg59b w58-124-9069910 blue 734 w58-124-9069916 blue 734 w58-124-908991a white bt3002 / tzc75024 w58-124-919991a red 0.4/2.42/4.07 w58-124-901991s red 735a qt-bnc w/boot w58-124-901991r red 735a qt-bnc w/boot 33533-47-010006 735a rta boot only for 735a qt bnc plug t o end of c onta ct. shown in t ermi nat ed position. 0 .4 0.3 ? 1 . 3 4 0 . 0 2 ? 9 . 8 5 0 . 0 6 min. 5.28 assembly instructions: bbai 1243 (rg-59) bbai 1262 (735, 734) bbai 1268 (bt 3002, tcz75024) mating interface cable r igh t an gle bo ot. 45.43 2 5 . 0 0 r 9 . 0 0 3 0.75 2 5 . 0 0 tooling accessories: dual action qt-bnc hand crimp tool qt -bnc pneumatic crimp t ool powered coaxial cable strip tools and cutter heads please refer to the tooling section pages 22-25 for part numbers. 3 2,50 (1.2 80) 12,70 (0.500) ? 1 4 , 4 5 ( 0 . 5 6 9 ) last digit in p/n signifies packaging type: 0 = single bag a = 25 pc tray 6 = 100 pc bag s = single r = 100 pc bag rta boot = 1000 pc bag
cannon 75 ohm connectors 1.6/5.6 19 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change the cannon range of 1.6/5.6 connectors are suitable for use in 75 ohm c ommunication systems and have become the recognized standard in telecommunications in many parts of the world. designed around the requirements of din 47295, cecc 22240 and iec 169-13, these connectors are designed for field installation and feature threaded couplings to ensure mating integrity and a snap-on interface for ease of connection. the range of parts shown in this publication includes plug and jack connectors for a variety of cables. other cable types and connector styles may be available on request. applications ? switching equipment ?dsx cross connects ??ase stations ?r?uters ?wi?eless ?telecom ?lan equipment features and benefits threaded coupling mechanism to ensure secure connection and snap-on interface for ease of engagement and separation most installations require no special tooling three-part construction with crimp inner contact and outer ferrule (no soldering required) designed for field installation designed for the most commonly used telecom cables in north america and europe rohs compliant part numbers mating interfaces m 9 x 0.5 th rea d. 7.00 + 0.50 0 min. 6.70 m in. 0 .25 ? m a x . 3 . 8 0 ? 6 . 6 0 + 0 . 0 9 0 ? 8 . 1 0 + 0 . 1 5 0 3 .00 0 .10 6.40 +0. 20 0 m ax. 0.15 3.90 +0.40 0 m ax. 5.50 ? m i n . 4 . 0 0 ? 0 . 9 7 + 0 . 0 6 0
cannon 75 ohm connectors din1.6/5.6 20 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change e lec trical i mpe dance 7 5 n ominal frequ enc y r ange 0-1 gh z volt age rating* at s ea level =33 0 vrms insulati on res istance 1 0g mini mu m c ontact resistance inner c ontact = 4 m max imum o uter contact: 2 m maximum r eflection coeffi cie nt* with f = 0.1 ghz = 0. 02 max imum mech anical withdrawal f orce inne r fe male c ontact 0.5n (0. 1 1 lbs ) minim um insertion forc e b etween jack s an d pl ugs sc rew types: 12n (2.7 lb s) maxim um. push -pull type : 20 n (4 .5 l bs) ma ximum materia ls bod y and nuts: brass . inne r ma le c ont act : br ass inner ferrule c ontact an d outer male co nta ct: ber ylli um c opp er. i nsu lato rs: ptfe c rimp ferr ules: a n ne ale d co p pe r allo y. finish/p lating c ontact su rfa ces: g old ove r ni cke l. fe male bodi es: gol d ov er n ick el. male bodies : ni ckel or s ilv er. n uts an d cri mp ferr ules : nick el environm ental tem pera ture - 40? c t o 85?c general c onn ect or dur abi lity 50 0 mat ings mini mum *guid elin e va lue only - w ill d ep end on ca ble an d conne cto r ty pes with f = 0.1-0. 5 ghz = 0 .04 ma ximum with f = 0.5-1. 0 ghz = 0.10 ma ximum withdrawal f orce inne r male c ontact 1.7n (0. 38 lbs) mini mum withdrawal f orce bet wee n jacks and plu gs sc rew types: 2 2n (4.9 lb s) mini mum . push -pull typ e: 20n (4. 5 lb s) max imum standards c ecc 2224 0, di n 47 295 , ie c 169 -13
cannon 75 ohm connectors din1.6/5.6 21 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change d50-a30-3233gba bt2003 d50-a30-3235gba bt3002/tzc75024 d50-a30-3237gba ra7000 d50-a28-3133gka bt2003 d50-a28-3135gka bt3002/tzc75024 d50-a28-3137gka ra7000 d50-a27-3033gea bt2003 d50-a27-3035gea bt3002/tzc75024 d50-a27-3037gea ra7000 part number cable type d50-a24-3033gda bt2003 d 50-a24-3035gda b t3002/tzc75024 d50-a24-3037gda ra7000 1.6/5.6 straight plug ~29.50 (1.161) 9.00 (.354) m 9.00x 0.50 1.6/5.6 straight bulkhead jack 1.6/5.6 right angle plug 1.6/5.6 right angle bulkhead jack ~27.50 ( 1.08 2) 9. 0 0 ( .354) 24 .00 ( .944) 10.00 (.393) 5. 0 0 ( .196) 16.00 ( .629) 9. 0 0 ( .354) ? 10 .40 ( .409) m 9. 0 0 x 0.50 26.30 ( 1.03 5) 10 .00 ( .393) 16.00 ( .629) 5. 0 0 ( .196) p ane l 2. 0 0 ( .07 8) max . 14 .50 ( .570) 9. 0 0 ( .354) assembly instructions: bbai 1245 assembly instructions: bbai 1245 assembly instructions: bbai 1247 assembly instructions: bbai 1247 contact customer service for other cable types
cannon 75 ohm connectors tooling 22 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change ferrule crimp tools t1025 crimp tool frame only f errule crimp tool die sets for t1025 t 1025/5 h ex die 4.52mm (.178) a/f t1025/8 hex die 6.81mm (.268) a/f t1025/9 hex die 3.84mm (.151) a/f t1025/10 hex die 5.41mm (.213) a/f t1025/36 hex die 4.3mm (.169) a/f k26293 3 way hex die, 2.67mm (.105),3.25mm (.128),4.52mm (.178) a/f note; contact customer service for availability on other die sets ferrule crimp tool 050-000-0020210 crimp tool frame only ferrule crimp tool die sets for 050-000-0020210 050-000-0020010 die set 3.25mm (.128) and 5.41mm (.213) a/f 050-000-0020011 die set 3.84mm (.151) and 5.18mm (.204) a/f 050-000-0020012 die set 4.52mm (.178) and 6.48mm (.255) a/f note; contact customer service for availability on other die sets center contact crimp t ools 050-000-0030070 12 point center pin indent afmsp-76 t4519 8 point center pin indent crimp tool mh800 gb109 center contact crimp tool without positioner 995-0001-584 8 point center pin indent crimp tool m22520/2-01 center contact positioner for 995-0001-584 t4831 positioner for 1.6/5.6 contacts t4868 positioner for bnc contacts t4852 positioner for 1.0/2.3 contacts
cannon 75 ohm connectors tooling 23 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change insertion / extraction tools for 1.0/2.3 and type 54 connectors t4839 straight tool, length 190mm (7.48) (figure a) t 4889 straight and right angle tool, length 190mm (7.48) (figure b) t4902 straight and right angle tool, length 430mm (16.9) (figure b) ddf plug extraction tools t4653 type 43 extractor tool 65a t4825 hdc43 extractor tool balun termination tools t4836 type 43 plug balun, 1.0/2.3 plug balun t4837 hdc 43 plug balun lock nut assembly t ools t4882 to be used with 1.0/2.3 connectors t4840 t o be used with 1.6/5.6 connectors qt-bnc crimp tools 050-000-0030210 qt-bnc dual action crimp frame only 050-000-0030120 qt-bnc dual action crimp tool frame w/ .178 hex die 050-000-0030150 qt-bnc dual action crimp tool frame w/.255 hex die qt-bnc die sets 050-000-0030122 .178 hex die for qt -bnc 050-000-0030152 .255 hex die for qt-bnc qt-bnc complete crimp tool kit (with case) 050-000-003200s contents include; carry case, 734 & 735 die sets, crimp tool frame, hand held coax stripper and spare pockets for qt -bnc connectors calibration tools (go/no go gauge) for qt-bnc die sets 050-000-0030023 .178 hex 050-000-0030043 .255 hex fig a fig b
cannon 75 ohm connectors tooling 24 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change qt-bnc pneumatic crimp machine 0 50-000-0040020 pneumatic crimp machine with .178 die set for 735 type cables 050-000-0040040 pneumatic crimp machine with .255 die set for 734, rg-59 type cables qt-bnc pneumatic die sets 050-000-0040022 .178 hex die for 735 type cables 050-000-0040042 .255 hex die for 734, rg-59 type cables powered coax stripper, itt port-a-strip kit (with case) t0k-000-0000 contents include; carry case, 734, rg-59 cutting head, power hand driver, rechargeable battery, recharging cord t0k-000-0001 contents include; carry case, 735 cutting head, power hand driver, rechargeable battery, recharging cord t0k-000-0004 contents include; carry case, 1855 cutting head, power hand driver, rechargeable battery, recharging cord contact customer service for availability on kits for other cable types. replacement cutting heads for powered coax stripper t00-000-0000 734, rg-59 cutting head t00-000-0001 735 cutting head t00-000-0009 1855 cutting head t00-000-0010 bt3002 t00-000-0011 ra7000 t00-000-0012 ra8000 contact customer service for availability on other cable types. complete powered coax stripper, itt port-a-strip kit (with case) t0k-000-0002 contents include; carry case, 734 cutting head, 735 cutting head power hand driver , rechargeable battery, recharging cord, ac, dc power supply contact customer service for availability on kits for other cable types. power coax stripper accessories tps-000-0000 ac/dc power supply (figure a) tsb-000-0000 spare rechargeable battery with recharging cord (figure b) tcc-000-0000 coax cable cutter (figure c) (figure a) (figure b) (figure c)
cannon 75 ohm connectors tooling 25 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change bench-top powered coax stripper t0b-000-0000 designed for high volume coax cable prepping, foot pedal operated. c utter heads sold separately. cutting heads for bench-top poweredcoax stripper tbc-000-0000 bench top cutting head for 734, rg-59 cable tbc-000-0001 bench top cutting head for 735 cable tbc-000-0006 bench top cutting head for 1855 cable tbc-000-0007 bench top cutting head for bt3002 cable tbc-000-0008 bench top cutting head for ra7000 cable tbc-000-0009 bench top cutting head for ra8000 cable contact customer service for availability on other types of cables.
cannon 75 ohm connectors product safety information 26 www.ittcannon.com dimensions shown in mm (inch) specifications and dimensions subject to change this note must be read in con- junction with the product data sheet/catalog. failure to observe the advice in this infor- mation sheet and the operating conditions specified in the prod- uct data sheet/ catalog could result in hazardous situations. 1. material content and physical form electrical connectors do not usually contain hazardous materials. they contain conduct- ing and non-conducting materials and can be divided into two groups. a) printed circuit types and low cost audio types which employ all plastic insulators and casings. b) rugged, fire barrier and high reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. contact materials vary with type of connector and also application and are usually manufactured from either: copper, copper alloys, nickel, alumel, chromel or steel. in special applications, other alloys may be specified. 2. fire characteristics and elec - tric shock hazard there is no fire hazard when the connec - tor is correctly wired and used within the specified parameters. incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. live circuits must not be broken by sepa- rating mated connectors as this may cause arcing, ionization and burning. heat dissipation is greater at maximum resistance in a circuit. hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. local overheating may also result from the use of the incorrect applica- tion tools or from poor quality soldering or slack screw terminals. overheating may occur if the ratings in the product data sheet/catalog are exceeded and can cause breakdown of insulation and hence electric shock. if heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through car- bonization of insulation and tracking paths. fire can then result in the presence of com- bustible materials and this may release nox- ious fumes. overheating may not be visually apparent. burns may result from touching overheated components. 3. handling care must be taken to avoid damage to any component parts of electrical connec- tors during installation and use. although there are normally no sharp edges, care must be taken when handling certain compo- nents to avoid injury to fingers. electrical connectors may be damaged in transit to the customers, and damage may result in cre- ation of hazards. products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. disposal incineration of certain materials may release noxious or even toxic fumes. 5. application connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an elec- tric shock could result from touching exposed contacts on an unmated connector . v oltages in excess of 30 v ac or 42.5 v dc are poten- tially hazardous and care should be taken to ensure that such voltages cannot be trans- mitted in any way to exposed metal parts of the connector body. the connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. circuit resist - ance and continuity check should be made to make certain that there are no high resist- ance joints or spurious conducting paths. always use the correct application tools as specified in the data sheet/catalog. do not permit untrained personnel to wire, assemble or tamper with connectors. for operation voltage please see appropriate national reg- ulations. important general information (i) air and creepage paths/operating volt - age. the admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. for this reason the air and creepage path data are only reference values. observe reduction of air and creepage paths due to pc board and/or harnessing. (ii) temperature all information given are temperature limits. the operation temperature depends on the individual application. (iii) other important information cannon continuously endeavors to improve their products. therefore, cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. ngineered for life?s a registered trade- mark of itt corporation ?007. all other trademarks or registered trademarks are property of their respective owners. all data subject to change without notice. product warranty itt electronic components, a division of itt corporation manufactures the highest quality products available in the marketplace; how- ever these products are intended to be used in accordance with the specifications in this publication. any use or application that devi- ates from the stated operating specifications is not recommended and may be unsafe. no information and data contained in this publi - cation shall be construed to create any liabil- ity on the part of cannon. any new issue of this publication shall automatically invalidate and supersede any and all previous issues. a limited warranty applies to cannon products. except for obligations assumed by cannon under this warranty, cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty , contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. this publication is not to be construed as an of fer . it is intended mere- ly as an invitation to make an offer. by this publication, cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. reprinting this publication is generally permitted, indicating the source. however, cannon's prior consent must be obtained in all cases.
as a world leader in circular, filter and hermetic connectors, itt can leverage its design and manufacturing expertise t o fit virtually any application. our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configuration for various harsh environments. itt can also meet numerous specs, including nato and mil standards. itt's electr onic components business ( www .ittcannon.com ) is an inter national supplier of connectors, inter connects, cable assemblies, i/o card kits and smart card systems. as a worldwide leader in connector technology for nearly a century, itt offers one of the industry's broadest product offerings, manufacturing capability worldwide, fast time to market, high volume/high yield capacity , robust design and value-based product development and an extensive sales and customer support network. cannon invented d-sub connectors in 1952. our family of d-subs now includes combinations of signal, power and rf , as well as sever e service sealed connectors. cannon d-subs are available with an extensive line of backshells and accessories and ar e one of the most economical shielded connector solutions available. qualified to the mil-dtl-24308 specification. cannon fiber optic solutions provide an excellent performance/cost value. performance can be tailored to the end system, and our use of superior materials and bonding agents pr ovides highly effective solutions. our wide variety of pr oducts includes fiber optic hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including mil and arinc standar d solutions. cannon microminiature connectors offer high performance and reliability with exceptional versatility. available in rectangular, circular and strip configurations for countless applications, many of our connectors meet or exceed applicable r equir ements of the mil-dtl-83513 specification. www.ittcannon.com/circulars ?www.ittcannon.com/filter ?www.ittcannon.com/hermetics www.ittcannon.com/dsubs www.ittcannon.com/fiberoptics www.ittcannon.com/micro circular/filter/hermetic connectors d-subminiature connectors microminiature connectors fiber optic connectors and cable assemblies itt is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and i nsert a rrangements, materials, plating and contact options. many of our standard and custom designs meet the stringent requirements of arinc 600, arinc 404 (mil-c-81659), and mil-dtl-83733 standards. www.ittcannon.com/rackandpanel r ack & panel connectors
75 ohm connectors customer support locations americas 100 new wood road watertown, ct 06796 tel: 860.945.0206 toll free: 800.683.7666 fax: 860.645.0303 asia unit 901 & 912, west tower, shun t ak center 168-200 connaught road central, hong kong t el: +852.2732.2720 fax: +852.2732.2919 europe jays close, viables estate basingstoke, hants, rg22 4ba tel: +44.1256.311200 f ax: +44.1256.323356 www.ittcannon.com ?007 it t corporation. ngineered for life?nd ?anon?ar registered trademarks of itt corporation. specification and other data are based on information available at the time of printing, and are subject to change without notice. 75o-04-07 cannon 75 ohm connectors electronic components

▲Up To Search▲

Price & Availability of W58-124-9019910

	To Download W58-124-9019910 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .