View PS2915-1-15_8661266.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r08ds0112ej0100 rev.1.00 page 1 of 12 nov 01, 2013 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. preliminary data sheet ps2915-1 high ctr, ac input response type 4-pi n ultra small flat-lead photocoupler description the ps2915-1 is an optically coupled isolator cont aining gaas light emitting diodes and an npn silicon phototransistor in one package for high density mounting applications. an ultra small flat-lead package has been provided which realizes a reduction in m ounting area of about 30%, compared with th e ps28xx series. features ? ultra small flat-lead package (4.6 (l) 2.5 (w) 2.1 (h) mm) ? high current transfer ra tio (ctr = 200% typ. @ i f = 1 ma, v ce = 5 v) ? high isolation voltage (bv = 2 500 vr.m.s.) ? ordering number of taping product: ps2915-1-f3, 3 500 pcs/reel ? safety standards ? ul approved: no. e72422 ? bsi approved (bs en 60065, bs en 60950) ? din en 60747-5-5 (vde 0884-5) approved (option) applications ? dc/dc converter ? modem/pc card r08ds0112ej0100 rev.1.00 nov 01, 2013 (top view) pin connection 43 12 1. anode, cathode 2. cathode, anode 3. emitter 4. collector
ps2915-1 r08ds0112ej0100 rev.1.00 page 2 of 12 nov 01, 2013 package dimensions (unit: mm) 5.00.2 0.15 +0.1 ?0.05 1.27 2.1 max. 0.40.1 2.50.3 4 3 12 r 4.60.2 0.20.1 4.1 min. marking example photocoupler construction parameter min. air distance 4 mm creepage distance 4 mm isolation distance 0.4 mm assembly lot 3 week assembled year assembled last number of type no. : 15 no. 1 pin mark (nicked corner) 20 15 320 r *1 *1 bar : pb-free company initial (engraved mark) ni / pd / au plating
ps2915-1 r08ds0112ej0100 rev.1.00 page 3 of 12 nov 01, 2013 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps2915-1 ps2915-1-ax 50 pcs (tape 50 pcs cut) standard products ps2915-1 ps2915-1-f3 ps2915-1-f3-ax embossed tape 3 500 pcs/reel (ul, bsi approved) ps2915-1-v ps2915-1-v-ax 50 pcs (tape 50 pcs cut) din en60747-5-5 ps2915-1-v-f3 ps2915-1-v-f3-ax pb-free (ni/pd/au) embossed tape 3 500 pcs/reel (vde 0884-5) approved(option) note: *1. for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current i f 50 ma forward current derating i f / c 0.5 ma/ c peak forward current *1 i fp 0.5 a power dissipation p d 60 mw transistor collector to emitter voltage v ceo 40 v emitter to collector voltage v eco 5 v collector current i c 40 ma power dissipation derating p c / c 1.2 mw/c power dissipation p c 120 mw isolation voltage *2 bv 2 500 vr.m.s. total power dissipation p t 160 mw operating ambient temperature t a ? 55 to +100 c storage temperature t stg ? 55 to +150 c notes: *1. pw = 100 s, duty cycle = 1% *2. ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output pins 1-2 shorted together, 3-4 shorted together.
ps2915-1 r08ds0112ej0100 rev.1.00 page 4 of 12 nov 01, 2013 electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 1 ma 0.9 1.1 1.3 v terminal capacitance c t v = 0 v, f = 1 mhz 30 pf transistor collector to emitter dark current i ceo i f = 0 ma, v ce = 40 v 100 na coupled current transfer ratio (i c/if ) *1 ctr i f = 1 ma, v ce = 5 v 100 200 400 % collector saturation voltage v ce (sat) i f = 1 ma, i c = 0.2 ma 0.13 0.3 v isolation resistance r i-o v i-o = 1 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz 0.4 pf rise time *2 t r v cc = 5 v, i c = 2 ma, r l = 1 k 5 s fall time *2 t f 10 turn-on time *2 t on v cc = 5 v, i f = 1 ma, r l = 5 k 40 s storage time *2 t s 10 s turn-off time *2 t off 120 s notes: *1 ctr rank n : 100 to 400 (%) *2 test circuit for switching time v cc v out i f pulse input in monitor pw = 100 s duty cycle = 1/10 i c input output

ps2915-1 r08ds0112ej0100 rev.1.00 page 5 of 12 nov 01, 2013 typical characteristics (t a = 25 c, unless otherwise specified) ambient temperature t a (c) maximum forward current i f (ma) maximum forward current vs. ambient temperature ambient temperature t a (c) transistor power dissipation p c (mw) transistor power dissipation vs. ambient temperature forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage collector to emitter voltage v ce (v) collector current i c (ma) collector current vs. collector to emitter voltage ambient temperature t a (c) collector to emitter dark current i ceo (na) collector to emitter dark current vs. ambient temperature collector saturation voltage v ce(sat) (v) collector current i c (ma) collector current vs. collector saturation voltage 80 40 60 20 0 25 50 75 100 0.5 ma/c 140 100 120 40 60 80 20 25 50 75 100 125 0 100 10 1 0.1 0.01 0.0 0.5 1.0 1.5 2.0 0c ?25c ?50c +60c +25c t a = +100c 68 42 010 20 16 12 8 4 1 ma 0.5 ma i f = 5 ma 2 ma ctr = 200% 18 14 10 6 2 ?25 0 25 50 75 100 1 10 100 1 000 10 000 0.1 1 10 0.0 0.2 0.4 0.6 0.8 1.0 v ce = 20 v 40 v ctr = 200% 1 ma i f = 0.5 ma 2 ma 5 ma remark the graphs indicate nominal characteristics.
ps2915-1 r08ds0112ej0100 rev.1.00 page 6 of 12 nov 01, 2013 frequency response frequency f (khz) normalized gain gv forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current normalized to 1.0 at t a = 25c, i f = 1 ma, v ce = 5 v ambient temperature t a (c) normalized current transfer ratio ctr normalized current transfer ratio vs. ambient temperature switching time t ( s) load resistance r l () switching time vs. load resistance 1.2 1.4 ?50 1.0 0.8 0.6 0.4 0.2 0.0 ?25 025 50 75 100 0 ?5 ?10 ?15 ?20 ?25 0.1 1 10 100 1 000 100 300 r l = 1 k 0.1 1 10 100 0 100 200 300 400 500 1 10 100 1 000 10 000 v ce = 5 v, n = 3 1k 10k 100 k 1 000 k sample a b c i f = 1 ma, v cc = 5 v, ctr = 200% t s t on t off remark the graphs indicate nominal characteristics.
ps2915-1 r08ds0112ej0100 rev.1.00 page 7 of 12 nov 01, 2013 taping specifications (unit: mm) ps2915-1-f3 1.550.05 4.00.1 2.00.05 4.00.1 1.750.1 2.9 max. 0.3 2.90.1 2.40.1 1.5 +0.1 ?0 5.30.1 5.50.05 12.00.2 tape direction outline and dimensions (tape) outline and dimensions (reel) packing: 3 500 pcs/reel 11.9 to 15.4 outer edge of flange 3302.0 1001.0 2.00.5 21.00.8 13.51.0 13.00.2 2.00.5 r r r r
ps2915-1 r08ds0112ej0100 rev.1.00 page 8 of 12 nov 01, 2013 recommended mount pad dimensions (unit: mm) remark this drawing is considered to meet air and outer creep age distance 4.0 mm minimum. all dimensions in this figure must be evaluated before use. 4.14 (0.35) 4.7 5.7 1.27 0.8 0.6 24-r0.1 ( ) : reference value
ps2915-1 r08ds0112ej0100 rev.1.00 page 9 of 12 nov 01, 2013 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temp erature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220c 180c package surface temperature t ( c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260c max. 120c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
ps2915-1 r08ds0112ej0100 rev.1.00 page 10 of 12 nov 01, 2013 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler?s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ratios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to ctr value variations or the lik e. therefore, check the ch aracteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity.
ps2915-1 r08ds0112ej0100 rev.1.00 page 11 of 12 nov 01, 2013 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068- 1/din en 60068-1) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.6 u iorm. , p d < 5 pc u iorm u pr 570 912 v peak v peak test voltage (partial discharge test, procedure b for all devices) u pr = 1.875 u iorm. , p d < 5 pc u pr 1068 v peak highest permissible overvoltage u tr 4 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/di n en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664 -1 vde0110 part 1) iii a storage temperature range t stg ?55 to +150 c operating temperature range t a ?55 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (ma ximum permissible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 300 500 10 9 c ma mw
ps2915-1 r08ds0112ej0100 rev.1.00 page 12 of 12 nov 01, 2013 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, tran sport and dispose of materials that contain arsenic and ot her such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history ps2915-1 data sheet description rev. date page summary 2.00 may 25, 2006 ? first edition issued 1.00 nov 01, 2013 throughout renesas fo rmat is applied to this data sheet. p.1 modification of features p.2 modification of package dimensions modification of marking example p.3 modification of ordering information p.4 modification of electrical characteristics p.6 modification of typical characteristics p.7 modification of taping specifications p.9 modification of notes on handling p.11 addition of specification of vde marks license document
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". t he recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufactu re, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or othe rwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesa s electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. htt p ://www.renesas.co m refer to "htt p ://www.renesas.com/" for the latest and detailed information . california eastern laboratories , inc. 4590 patrick henr y drive, santa clara, california 95054, u.s.a . tel: +1-408-919-2500, fax: +1-408-988-0279 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-651-700, fax: +44-1628-651-804 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co. , ltd . 11f., samik lavied' or bld g ., 720-2 yeoksam-don g , kan g nam-ku, seoul 135-080, korea tel: +82-2-558-3737 , fax: +82-2-558-514 1 s ale s o ffi c e s ? 2013 renesas electronics corporation. all rig hts reserved. [colophon 2.2 ]

▲Up To Search▲

Price & Availability of PS2915-1-15

	To Download PS2915-1-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .