View Q50_8704013.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

page 1 output voltage* 2 q models 0.50 watt qh models 1.25 watt 100 vdc q01 qh01 150 vdc q015 qh015 200 vdc q02 qh02 250 vdc q025 qh025 300 vdc q03 qh03 350 vdc q035 qh035 400 vdc q04 qh04 450 vdc q045 qh045 500 vdc q05 qh05 600 vdc q06 qh06 700 vdc q07 qh07 800 vdc q08 qh08 900 vdc q09 qh09 1,000 vdc q10 qh10 1,200 vdc q12 qh12 1,500 vdc q15 qh15 2,000 vdc q20 qh20 2,500 vdc q25 3,000 vdc q30 4,000 vdc q40 5,000 vdc Q50 6,000 vdc q60 8,000 vdc q80 10,000 vdc q101 proven reliability e344664 0.5 watt and 1.25 watt versions available (1.25w up to 2kv) dual output (center tap) option available (up to q09 / qh09) external copper shield (s suffx)) control pin option available (up to Q50 / qh20) (c suffx) extended operating temperature (0.5w - q models) (t suffx) ordering information (see page 13) alternate input / output voltages (consult factory) alternate pin pattern, see va units (page 10) reduced input power (consult factory) q series isolated, proportional dc to hv dc converters 100v to 10,000v @ 0.5 and 1.25 watts product description applications options product overview features avalanche photodiodes photomultiplier tubes light sources piezo devices sustaining ion pumps electrophoresis printers igniters capacitor charging ultra-miniature case size proven reliability no external components required low ripple and emi/rfi proportional input/output input/output isolation low leakage current <250na low input/output coupling capacitance, <50 pf typical mtbf: >3 million hrs. per bellcore tr 332 short circuit protection, 1 minute minimum control pin can be used for on/off control rohs compliant ul recognized complete list of models on pages 2-5 the q series is a broad line of ultra-miniature, high reliability dc to hv dc converters supplying up to 5,000 volts in only 0.125 cubic inches and up to 10,000 volts in only 0.614 cubic inches. these component- sized converters are ideal for applications requiring minimal size and weight. the output is directly proportional to the input voltage and is linear from <0.7v input to maximum input voltage, allowing for an adjustable output voltage. now ul recognized 4752cm01 www.xppower.com
page 2 q series electrical specifications *3 (100v - 900v) q models - 0.50 watt qh models - 1.25 watt output voltage* 2 model *6 maximum output current *1 ripple p-p model *6 maximum output current *1 ripple p-p reversible: 0 to (+) or (-) vout 0 to 100vdc q01 5.000 ma <1.000 % qh01 12.500 ma <2.500 % 0 to 150vdc q015 3.333 ma <0.500 % qh015 8.333 ma <1.125 % 0 to 200vdc q02 2.500 ma <0.250 % qh02 6.250 ma <1.125 % 0 to 250vdc q025 2.000 ma <0.250 % qh025 5.000 ma <1.125 % 0 to 300vdc q03 1.667 ma <0.250 % qh03 4.167 ma <1.125 % 0 to 350vdc q035 1.429 ma <0.250 % qh035 3.571 ma <1.125 % 0 to 400vdc q04 1.250 ma <0.100 % qh04 3.125 ma <0.500 % 0 to 450vdc q045 1.111 ma <0.150 % qh045 2.778 ma <0.625 % 0 to 500vdc q05 1.000 ma <0.150 % qh05 2.500 ma <0.625 % 0 to 600vdc q06 0.833 ma <0.100 % qh06 2.083 ma <0.500 % 0 to 700vdc q07 0.714 ma <0.250 % qh07 1.786 ma <0.625 % 0 to 800vdc q08 0.625 ma <0.300 % qh08 1.563 ma <1.0 % 0 to 900vdc q09 0.556 ma <0.250 % qh09 1.389 ma <1.0 % parameter value input voltage 0 to 5, 12, 15 or 24 volts typical turn-on voltage <0.7 volts isolation < +/- 500 vdc bias on output return (pin4) output voltage tolerance +10%, -10% (at 100% output, full load) frequency 75-500khz (typical) control pin 0 to vin (see page 12 for details) storage temperature -55 to +105c standard operating temperature -25 to +70c *4 (case) extended operating temperature -55 to +75c *4 (case) [q models / 0.5w] input current q models - 0.50 watt qh models - 1.250 watt vin no-load full-load no-load full-load 5 vdc <100 ma <250 ma <250 ma <550 ma 12 vdc <40 ma <100 ma <100 ma <250 ma 15 vdc <32 ma <80 ma <80 ma <200 ma 24 vdc <20 ma <50 ma <50 ma <125 ma 4752cm01 www.xppower.com
page 3 q series electrical specifications *3 (100v - 900v) q models - 0.50 watt qh models - 1.25 watt output voltage* 2 model maximum output current *1 ripple p-p model maximum output current *1 ripple p-p *5 dual output (center tap): 0 to (+) and (-) vout 0 to +/- 50 vdc q01ct 5.000 ma <1.000 % qh01ct 12.500 ma <2.500 % 0 to +/- 75 vdc q015ct 3.333 ma <0.500 % qh015ct 8.333 ma <1.125 % 0 to +/-100 vdc q02ct 2.500 ma <0.250 % qh02ct 6.250 ma <1.125 % 0 to +/-125 vdc q025ct 2.000 ma <0.250 % qh025ct 5.000 ma <1.125 % 0 to +/-150 vdc q03ct 1.667 ma <0.250 % qh03ct 4.167 ma <1.125 % 0 to +/-175 vdc q035ct 1.429 ma <0.250 % qh035ct 3.571 ma <1.125 % 0 to +/-200 vdc q04ct 1.250 ma <0.100 % qh04ct 3.125 ma <0.500 % 0 to +/-225 vdc q045ct 1.111 ma <0.150 % qh045ct 2.778 ma <0.625 % 0 to +/-250 vdc q05ct 1.000 ma <0.150 % qh05ct 2.500 ma <0.625 % 0 to +/-300 vdc q06ct 0.833 ma <0.100 % qh06ct 2.083 ma <0.500 % 0 to +/-350 vdc q07ct 0.714 ma <0.250 % qh07ct 1.786 ma <0.625 % 0 to +/-400 vdc q08ct 0.625 ma <0.300 % qh08ct 1.563 ma <1.0 % 0 to +/-450 vdc q09ct 0.556 ma <0.250 % qh09ct 1.389 ma <1.0 % parameter value input voltage 0 to 5, 12, 15 or 24 volts typical turn-on voltage <0.7 volts isolation < +/- 500 vdc bias on output return (pin4) output voltage tolerance +10%, -10% (at 100% output, full load) frequency 75-500khz (typical) control pin 0 to vin (see page 12 for details) storage temperature -55 to +105c standard operating temperature -25 to +70c *4 (case) extended operating temperature -55 to +75c *4 (case) [q models / 0.5w] input current q models - 0.50 watt qh models - 1.250 watt vin no-load full-load no-load full-load 5 vdc <100 ma <250 ma <250 ma <550 ma 12 vdc <40 ma <100 ma <100 ma <250 ma 15 vdc <32 ma <80 ma <80 ma <200 ma 24 vdc <20 ma <50 ma <50 ma <125 ma 4752cm01 www.xppower.com
page 4 q models - 0.50 watt qh models - 1.25 watt output voltage* 2 model maximum output current *1 ripple p-p model maximum output current *1 ripple p-p positive 0 to +1000 vdc q10 0.500 ma <0.250 % qh10 1.250 ma <1.0% 0 to +1200 vdc q12 0.417 ma <0.250 % qh12 1.042 ma <1.0% 0 to +1500 vdc q15 0.333 ma <0.250 % qh15 0.833 ma <1.0% 0 to +2000 vdc q20 0.250 ma <0.250 % qh20 0.625 ma <1.0% negative 0 to -1000 vdc q10n 0.500 ma <0.250 % qh10n 1.250 ma <1.0% 0 to -1200 vdc q12n 0.417 ma <0.250 % qh12n 1.042 ma <1.0% 0 to -1500 vdc q15n 0.333 ma <0.250 % qh15n 0.833 ma <1.0% 0 to -2000 vdc q20n 0.250 ma <0.250 % qh20n 0.625 ma <1.0% parameter value input voltage 0 to 5, 12, 15 or 24 volts typical turn-on voltage <0.7 volts isolation < +/- 500 vdc bias on output return (pin4) output voltage tolerance +10%, -10% (at 100% output, full load) frequency 75-500khz (typical) control pin 0 to vin (see page 12 for details) storage temperature -55 to +105c standard operating temperature -25 to +70c *4 (case) extended operating temperature -55 to +75c *4 (case) [q models / 0.5w] input current q models - 0.50 watt qh models - 1.250 watt vin no-load full-load no-load full-load 5 vdc <100 ma <250 ma <250 ma <550 ma 12 vdc <40 ma <100 ma <100 ma <250 ma 15 vdc <32 ma <80 ma <80 ma <200 ma 24 vdc <20 ma <50 ma <50 ma <125 ma q series electrical specifications *3 (1,000v - 2,000v) 4752cm01 www.xppower.com
page 5 q series 0 to 5v only (for models over 3kv) q models - 0.50 watt output voltage* 2 model maximum output current *1 ripple p-p positive 0 to +2,500 vdc q25 0.200 ma <0.500 % 0 to +3,000 vdc q30 0.167ma <0.500 % 0 to +4,000 vdc q40 0.125 ma <0.500 % 0 to +5,000 vdc Q50 0.100 ma <0.500 % negative 0 to -2,500 vdc q25n 0.200 ma <0.500 % 0 to -3,000 vdc q30n 0.167 ma <0.500 % 0 to -4,000 vdc q40n 0.125 ma <0.500 % 0 to -5,000 vdc Q50n 0.100 ma <0.500 % input current q models - 0.50 watt vin no-load full-load 5 vdc <250 ma <400 ma 12 vdc <100 ma <250 ma 15 vdc <75 ma <125 ma 24 vdc <35 ma <75 ma parameter value input voltage 0 to 5, 12, 15 or 24 volts 0 to 5v (for models over 3kv) typical turn-on voltage <0.7 volts isolation < +/- 500 vdc bias on output return (pin4) output voltage tolerance +10%, -10% (at 100% output, full load) frequency 75-500khz (typical) control pin 0 to vin (see page 12 for details) storage temperature -55 to +105c standard operating temperature -25 to +60c *4 (case) extended operating temperature -55 to +70c *4 (case) [q models / 0.5w] electrical specifications *3 (2,500v - 5,000v) 4752cm01 www.xppower.com
page 6 q series electrical specifications *3 (6,000v - 10,000v) q models - 0.50 watt output voltage* 2 model maximum output current *1 ripple p-p positive 0 to +6,000 vdc q60 83 a <1.000 % 0 to +8,000 vdc q80 62.5 a <1.000 % 0 to +10,000 vdc q101 50 a <1.000 % negative 0 to -6,000 vdc q60n 83 ua <1.000 % 0 to -8,000 vdc q80n 62.5 ua <1.000 % 0 to -10,000 vdc q101n 50 ua <1.000 % input current q models - 0.50 watt vin no-load full-load 5 vdc <175 ma <250 ma parameter value input voltage 0 to 5 volts typical turn-on voltage <0.7 volts isolation < +/- 500 vdc bias on output return (w4) output voltage tolerance +10%, -10% (at 100% output, full load) frequency 75-500khz (typical) standard temperature ranges operating: -10 to +60c *4 (case) storage: -20 to +105c 4752cm01 www.xppower.com
page 7 detailed product description copper shield placement the q series is a broad line of ultra-miniature, high reliability dc to hv dc converters supplying up to 5,000 volts in only 0.125 cubic inches and up to 10,000 volts in only 0.614 cubic inches. these component-sized convert - ers are ideal for applications requiring minimal size and weight. the output is directly proportional to the input voltage and is linear from <0.7v input to maximum input voltage, allowing for an adjustable output voltage. out - put is load dependent. a control pin option allows full control of the output via a high impedance input, ideal for error-amplifer control in closed-loop systems. isolation is <+/- 500v bias on output return and output power is either 0.5 watt or 1.25 watts. no external components or minimum load are required. the output ripple is extremely low for this package size, as low as .1%. light weight and wide temperature range make these units ideal for portable, battery-powered equipment. many models feature a dual output (center tap) option, which creates both a positive and a negative output from miniature, one low cost unit. an alternate pin pattern is available for users wishing to upgrade without modifying their board design. output is load dependent. application notes are available on this series, and technical assistance is readily available. q series block diagram note: pin designators for pin out models up to 5kv. conceptual drawing. copper shields are factory installed. 4752cm01 www.xppower.com
page 8 pin # 100v to 900v 1,000v to 2,000v 1 input (-) input (-) 2 input (+) input (+) 3 output (+) hv output 4 output (-) output return 5* dual output/center tap 6* control pin parameter value weight 0.15 ounces approx. (4.25 grams) volume 0.125 cubic inches (2.05cm 3 ) dimensions 0.50l (12.7) x 0.50w (12.7) 0.50h (12.7) q and qh series mechanical specifications (100v - 2,000v) top view side view dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) *optional 4752cm01 www.xppower.com model: 1 111111111 mfg code: 1 11111111111
page 9 parameter value weight 0.15 ounces approx. (4.25 grams) volume 0.125 cubic inches (2.05cm 3 ) dimensions 0.50l (12.7) x 0.50w (12.7) 0.50h (12.7) pin # function 1 input (-) 2 input (+) 3 hv output 4 hv return 5* 6* control pin q and qh series mechanical specifications (2,500v - 5,000v) top view side view dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) *optional 4752cm01 www.xppower.com model: 111111111 1 mfg code: 11111111111 1
page 10 program screen parameter value weight 1 ounce (28.3 grams) volume 0.614 cu inches (10.06 cu cm) dimensions 0.85l (21.59) x 0.85w (21.59) x 0.85h (21.59) wire color function 1 red input (+) 2 black input (-) 3 brown hv output 4 violet hv return q series mechanical specifications (6,000v - 10,000v) top view side view dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4752cm01 www.xppower.com
page 11 q series mechanical specifications, alternate pin pattern (100v - 1,000v) parameter value weight 0.15 ounce (4.25 grams) volume 0.125 cubic inches (2.05cm 3 ) dimensions 0.50l (12.7) x 0.50w (12.7) 0.50h (12.7) pin # function 1 input (-) 2 input (+) 3 hv output 4 hv return not recommended for new designs dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) top view side view 4752cm01 www.xppower.com
page 12 q series parameter value weight 0.15 ounce (4.25 grams) volume 0.125 cubic inches (2.05cm 3 ) dimensions 0.5l (12.7) x 0.5w (12.7) 0.5h (12.7) pin # function 1 input (-) 2 input (+) 3 hv output 4 hv return mechanical specifications, alternate pin pattern (1,500v - 5,000v) dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) not recommended for new designs top view side view 4752cm01 www.xppower.com
page 13 q series application notes typical hv output vs. control voltage 0 50 100 150 200 250 300 0 20 40 60 80 100 % control voltage note: vin held at maximum % hv output full load output no load output (q) no load output (qh) safe operating limit typical input vs. output voltage 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 % input voltage note: control pin tied to vin pin % output voltage loaded no load (q) no load (qh) 4752cm01 www.xppower.com
page 14 ordering information order code availability type 0.5 watt q all models 1.25 watt qh up to 2kv 1.25 watt (alternate pin pattern)* 4 va up to 2kv output voltage see tables polarity designator positive output blank negative output n dual output (center tap) option ct up to 900v input voltage 5 vdc 5 all models 12 vdc 12 up to 3kv 15 vdc 15 up to 3kv 24 vdc 24 up to 3kv options control pin c up to 5kv extended temp t up to 5kv, 0.5w external copper shield s all models q series *note: 1. at maximum rated output voltage 2. output voltage is load dependent. under light or no-load conditions, reduce the input voltage so maximum rated output voltage is not exceeded. 3. specifcations are after 30 minute warm-up, full-load at 25oc, unless otherwise noted. 4. proper thermal management techniques are required to maintain safe case temperature at maximum power output. 5. ripple specifcation for dual output units applies to the voltage between the positive and negative output terminals. 6. for dual output units [ct option], the negative output voltage will be 10% larger than the positive output voltage with respect to the center tap pin. xp-emco reserves the right to make changes on products and literature, including specifcations, without notice. xp-emco standard product models are not recommended for copy-exact applications or any other application restricting product changes. copy-exact options are available. please contact an xp-emco sales representative for more details. option codes how to order q 10 n - 5 c t s q, qh, va series 10 output voltage (see table...) n polarity designator example q10n-5cts: q series 0.5w , 1 000 vdc, n negative, 5 vdc input, c for control pin, t for extended temperature, s for shield. part number selector: model number: 5 input v oltage t for extended temperature c for control pin (optional) s for shield (optional) 4752cm01 www.xppower.com

▲Up To Search▲

Price & Availability of Q50

	To Download Q50 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .