chemical system: silver oxide (zn/ag 2 o) designation: ansi/neda-1133so/1132so, iec-sr43 nominal voltage: 1.55 volts typical capacity: 127 mah* (to 1.2 volts) capacity test: 6.5k ohm continuous drain at 21c typical weight: 1.7 grams (0.06 oz.) typical volume: 0.44 cubic centimeters (0.27 cubic inch) impedance (40 hz): 5 to 15 ohms load cutoff 1.2v (ohm) (hours) 6.5k 542 (milliamperes) schedule typical drains typical performance at 21c (70f) mm (inches) typical discharge characteristics industry standard dimensions energizer 386/301 ?energizer holdings, inc. - contents herein do not constitute a warranty. im p ortant notice this datasheet contains typical information specific to products manufactured at the time of its publication. continuous 0.234 at 1.52v typical performance at low discharge rates temperature characteristics silver oxide specifications cross section * varies according to the applied load, temperature, and cutoff voltage. pr o d uc t data s heet 1-800-383-7323 / usa 1-800-383-7323 / canada 1-800-383-7323 usa/can www.energizer.com 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 0 150 300 450 600 voltage, ccv service, hours schedule: continuous typical drain @1.52v: 0.234 m illiamperes load: 6.5k ohm designed for use on continuous low drain high pulse on demand 0 25 50 75 100 125 -20 0 20 40 service (%) temperature (c) service effects 60 70 80 90 100 024681012 service (%) storage time (yrs) storage effects 40 c 20 c 0c anode cap gel anode gasket can separator cathode 11.60 (0.457) 11.25 (0.443) r1.5 (0.059) ref. typical 0.13 (0.005) minimum ref. (applies to top edge of gasket or edge of crimp, whichever is higher) 0.20 (0.008) maximum ref. permissible deflection from a flat 6.70 (0.265) ref. typical 4.20 (0.165) 3.80 (0.150) 3.63 (0.143) ref. 3.38 (0.133) ref. form no. ebc - 4350b page 1 of 1 obsolete
|