hae150w 1 www.pduke.com 2014/4/30 hae150w series half-brick dc-dc converter 4:1 ultra wide input range up to 182watts features applications ? no minimum load required ? 2250vdc input to output basic insulation ? safety meets ul60950-1, en60950-1, iec60950-1, & en 50155 ? ce marked ? compliant to rohs ii & reach ? railway system ? wireless network ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment 2250vdc isolation remote control uvp ocp scp ovp otp sync technical specification all specifications are typical at nominal input, ful l load and 25 otherwise noted input range output voltage output current @full load input current @ no load efficiency maximum capacitor load model number vdc vdc a ma % f hae150-24s3p3w 9 ~ 36 3.3 40 20 88 121000 hae150-24s05w 9 ~ 36 5 28 25 90 56000 hae150-24s12w 8.5 ~ 36 12 12 25 90 10000 hae150-24s15w 8.5 ~ 36 15 9.5 25 91 6300 hae150-24s24w 8.5 ~ 36 24 6 25 90 2500 hae150-24s28w 8.5 ~ 36 28 5 25 90 1700 hae150-24s48w 8.5 ~ 36 48 3 35 90 620 hae150-48s3p3w 16.5 ~ 75 3.3 40 15 89 121000 hae150-48s05w 16.5 ~ 75 5 30 15 91 60000 hae150-48s12w 16.5 ~ 75 12 13 20 91 10800 hae150-48s15w 16.5 ~ 75 15 10 20 91 6600 hae150-48s24w 16.5 ~ 75 24 6.5 20 91 2700 hae150-48s28w 16.5 ~ 75 28 5.5 20 91 1900 hae150-48s48w 16.5 ~ 75 48 3.2 25 91 660 hae150-110s3p3w 43 ~ 160 3.3 43 10 88 130000 hae150-110s05w 43 ~ 160 5 32 10 90 64000 hae150-110s12w 43 ~ 160 12 15 10 90 12500 HAE150-110S15W 43 ~ 160 15 12 10 90 8000 hae150-110s24w 43 ~ 160 24 7.5 10 90 3100 hae150-110s28w 43 ~ 160 28 6.5 10 90 2300 hae150-110s48w 43 ~ 160 48 3.8 10 90 790 part number structure hae150 - 48 s 05 w - p y c th hs series name input output output input ctrl and sync pin case pin through hole assembly option voltage quantity voltage range pin options option option type (1) (vdc) (vdc) 24: 8.5~36 s: single 3p3: 3.3 4:1 : negative logic, : nc : nc : thread : no heat-sink 9~36 05: 5 0.200" pin length y: sync pin c: case pin th: no thread heat-sink type: 48: 16.5~75 12: 12 l: negative logic, hs: height h=0.45? vertical fin, 110: 43~160 15: 15 0.145" pin length 7g-0021a-f 24: 24 p: positive logic, hs1: height h=0.24? horizontal fin, 28: 28 0.200" pin length 7g-0022a-f 48: 48 s: positive logic, hs2: height h=0.24? vertical fin, 0.145"pin length 7g-0023a-f hs3: height h=0.45? horizontal fin, 7g-0024a-f terminal block type (2) : t: wall mounted tf: wall mounted with emc filter (3) tf1: wall mounted with emc filter can be connected to pe (3) (1) the module can?t equip heat-sink with th option . (2) no y and c function for terminal block type, and terminal block type only for 0.200? pin length. (3) emi filter meet en55011, en55022 class a.
hae150w 2 www.pduke.com 2014/4/30 input specifications parameter conditions min. typ. max. unit operating input voltage range 24vin(nom) 48vin(nom) 110vin(nom) 3.3 & 5vout others 9 8.5 16.5 43 24 24 48 110 36 36 75 160 vdc start up voltage 24vin(nom) 48vin(nom) 110vin(nom) 9 18 43 vdc shutdown voltage 24vin(nom) 48vin(nom) 110vin(nom) 7.3 15.5 33.0 8.1 16.3 36.0 vdc start up time constant resistive load power up remote on/off 75 75 ms input surge voltage 1 second, max. 24vin(nom) 48vin(nom) 110vin(nom) 50 100 185 vdc input filter (1) pi type negative logic (standard) dc-dc on dc-dc off short or 0 ~ 1.2vdc open or 3 ~ 12 vdc referred to ?vin pin positive logic (option) dc-dc on dc-dc off open or 3 ~ 12 vdc short or 0 ~ 1.2vdc remote on/off input current of ctrl pin -0.5 1 ma remote off input current 3 ma sync pin signal (2) -0.3 5.6 vdc output specifications parameter conditions min. typ. max. unit voltage accuracy -1.0 +1.0 % line regulation low line to high line at full load -0.1 +0.1 % load regulation no load to full load -0.1 +0.1 % voltage adjustability maximum output deviation is i nclusive of remote sense -20 +10 % remote sense % of vout(nom) if remote sense is not being used, sense pins shoul d be connected to corresponding polarity output pins. 10 % ripple and noise measured by 20mhz bandwidth with a 1 f/25v x7r mlcc and a 22 f/25v pos-cap with a 1 f/25v x7r mlcc and a 22 f/25v pos-cap with a 4.7 f/50v x7r mlcc with a 2.2 f/100v x7r mlcc 3.3vout, 5vout 12vout, 15vout 24vout, 28vout 48vout 75 100 200 300 mvp-p temperature coefficient -0.02 +0.02 %/ transient response recovery time 25% load step change 200 250 s over voltage protection % of vout(nom); hiccup mode 115 130 % over load protection % of iout rated; hiccup mode 120 150 % short circuit protection continuous, automatics recovery general specifications parameter conditions min. typ. max. unit isolation voltage 1 minute (basic insulation) input to output input (output) to case 2250 1600 vdc isolation resistance 500vdc 1 g isolation capacitance 2500 pf switching frequency 225 250 275 khz safety meets ul60950-1 en60950-1 iec60950-1 en50155 case material 24vin(nom) and 48vin(nom) 110vin(nom) metal aluminum base-plate with plastic case base material 24vin(nom) and 48vin(nom) fr4 pcb potting material silicone (ul94 v-0) weight 105g (3.70oz) mtbf mil-hdbk-217f, full load 3.50010 5 hrs
hae150w 3 www.pduke.com 2014/4/30 environmental specifications parameter conditions min. typ. max. unit operating case temperature base-plate -40 +115 over temperature protection +120 storage temperature range terminal block type others -40 -55 +105 +125 thermal impedance (3) vertical direction by natural convection (20lfm) module without assembly option only mount on the iron base-plate heat-sink type with 0.24" height heat-sink type with 0.45" height 6.1 2.8 5.1 4.6 /w thermal shock mil-std-810f shock en61373, mil-std-810f vibration en61373, mil-std-810f relative humidity 5% to 95% rh emc specifications parameter conditions level emi (4) en55011, en55022 class a class b esd en61000-4-2 air 8kv and contact 6kv perf. criteria a radiated immunity en61000-4-3 20v/m perf. criteria a fast transient (5) en61000-4-4 2kv perf. criteria a surge (5) en61000-4-5 en55024 2kv and en50155 2kv perf. cr iteria a conducted immunity en61000-4-6 10vr.m.s perf. criteria a note: 1. input source impedance: the power modules will oper ate as specifications without external components, assuming that the source voltage has a very low impedance and reasonable input voltage reg ulation. highly inductive source impedances can aff ect the stability of the power module. since real-world voltage source has finite impedanc e, performance can be improved by adding external f ilter capacitor. the hae150-24s w and hae150-48s w recommended nippon chemi-con ky series, 100 f/100v. the hae150-110s w recommended ruby-con bxf series, 68 f/200v. 2. (1)multiple hae150w series module can be synchroniz ed together simply by connecting the module sync pi ns together. care should be taken to ensure the ground potential differences between modules are minimized. (2)in this configuration all of the modules will be synchronized to the highest frequency module. (3)up to three modules can be synchronized using th is technique. (4)more relevant information in datasheet. 3. (1)thermal test condition with vertical direction b y natural convection (20lfm). (2)the iron base-plate dimension is 19? x 3.5? x 0. 063? (the height is eia standard 2u). (3) the heat-sink is optional and p/n: 7g-0021a-f , 7g-0022a-f , 7g-0023a-f , 7g-0024a-f. please refer to heat-sink selection guide. 4. the hae150w series standard module meets en55011, e n55022 class a and class b with external components . 5. an external input filter capacitor is required if t he module has to meet en61000-4-4, en61000-4-5. the hae150-24s w and hae150-48s w recommended 2 pcs of aluminum electrolytic capaci tor (nippon chemi-con ky series, 220 f/100v) to connect in parallel. the hae150-110s w recommended 3 pcs of aluminum electrolytic capaci tor (ruby-con bxf series, 100 f/250v) to connect in parallel. 6. case grounding connecting four screw bolts to shield plane will he lp to reduce the emi. 7. for further information, please contact with p-duke . caution: this power module is not internally fused. an input line fuse must always be used. characteristic curve 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 ambient temperature,ta( ) output power(%) dc/dc module only 100lfm 200lfm 300lfm 400lfm 500lfm mount on 2u iron base-plate (dimension 19? x 3.5? x 0.063?) natural convection (20lfm) terminal block natural convection (20lfm) 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 ambient temperature,ta( ) output power(%) natural convection (20lfm) 100lfm 200lfm 300lfm 400lfm 500lfm 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 ambient temperature,ta( ) output power(%) natural convection (20lfm) 100lfm 200lfm 300lfm 400lfm 500lfm hae150-48s05w derating curve (note 3) hae150-48s05w derating curve (note 3) with 0.24? height heat-sink hae150-48s05w derating curve (note 3) with 0.45? height heat-sink 60 66 72 78 84 90 96 16.5 24 30 36 42 48 54 60 66 72 75 input voltage(v) efficiency(%) iout= 100% f.l iout= 50% f.l iout= 25% f.l 60 66 72 78 84 90 96 10 20 30 40 50 60 70 80 90 100 % of full load efficiency(%) vin= 16.5v vin= 24v vin= 48v vin= 75v hae150-48s05w efficiency vs. input voltage hae150-4 8s05w efficiency vs. output load
hae150w 4 www.pduke.com 2014/4/30 heat-sink type options vertical fin orientation, suffix:-hs, -hs2 horizont al fin orientation, suffix:-hs1, -hs3 hs: height h=0.45? vertical fin, 7g-0021a-f hs1: height h=0.24? horizontal fin, 7g-0022a-f hs2: height h=0.24? vertical fin, 7g-0023a-f hs3: height h=0.45? horizontal fin, 7g-0024a-f 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) terminal block type option wall mounted, suffix: -t wall mounted with emc filter, suffix: -tf wall mounted with emc filter, suffix: -tf1 (can be connected to pe ) terminal block type -t -tf -tf1 weight 235g (8.29oz) 280g (9.88oz) 287g (10.12oz) dimensions 3.35 x 2.40 x 1.27 inch (85.0 x 61.0 x 32.3 mm) 3.35 x 2.40 x 1.47 inch (85.0 x 61.0 x 37.3 mm) 3.35 x 2.40 x 1.53 inch (85.0 x 61.0 x 38.8 mm) through hole (wl) 2.126 x 3.071 inch (54.00 x 78.00 mm), 4- 0.17 inch ( 4.3mm) for further information, please contact with p-duke . m echanical d rawing hae150-24s w, hae150-48s w 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1) 5. mounting screws should always be used. 6. the screw locked torque: max 5.0kgf-cm/0.49n-m hae150-110s w 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1) 5. mounting screws should always be used. 6. the screw locked torque: max 3.5kgf-cm/0.34n-m pin connection pin define diameter 1 -vin 0.04 inch 2 case (option) 0.04 inch 3 ctrl 0.04 inch 4 +vin 0.04 inch 5 -vout 0.08 inch 6 -sense 0.04 inch 7 trim 0.04 inch 8 +sense 0.04 inch 9 +vout 0.08 inch 10 sync (option) 0.04 inch external output trimming output can be externally trimmed by using the method shown below. ?? ? ?? ? ? ? = k 2 % 100 r d ( ) ( ) ?? ? ?? ? ? ? + ? ? ? + = k % % 2 100 % 225 .1 % 100 v r out u
|
